Image of 1936 Buick Limited Series 90, Note: These illustrations use artistic license and may differ from actual historical models.
Performance Metrics
Fundamental Metrics
Emotional Appeal
MMP Rating
| Engine Specifications | |
|---|---|
| Engine: | Straight 8 |
| Displacement: | 320.2 cu in (5.2 L) |
| Horsepower: | Estimated 120-130 HP |
| Torque: | Not available |
| Compression Ratio: | 6.1:1 |
| Ignition System: | Battery and coil |
| Cooling System: | Liquid cooled |
| Performance Specifications | |
| 0-60 Time: | Not available |
| 1/4 Mile Time: | Not available |
| Top Speed: | 90 mph |
| Transmission and Drive | |
| Drive Type: | Rear wheel drive |
| Transmission Type: | 3-speed manual |
| Fuel and Efficiency | |
| Fuel System Type: | Carburetor |
| MPG: | Not available |
| Dimensions and Brakes | |
| Brakes: | Drum brakes |
| Wheelbase: | 138 in (3505 mm) |
| Weight: | 4,600 lbs |
Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.
A Gleaming Jewel of Pre-War Luxury: The 1936 Buick Limited Series 90
The 1936 Buick Limited Series 90 emerged as a paragon of luxury and a testament to the craftsmanship of its era. Born from the assembly lines of the Buick Motor Division, a cornerstone of General Motors, this vehicle was not merely a means of transportation; it was an opulent statement on wheels. At a time when America was clawing its way out of the Great Depression, the Limited Series 90 represented hope and grandeur, serving as a beacon of American industrial prowess. An intriguing fact about this majestic automobile is that it was often compared to the finest offerings from Cadillac, reflecting its esteemed status among high-end vehicles.
Design and Innovation: A Symphony in Steel and Chrome
The exterior styling of the 1936 Buick Limited Series 90 was nothing short of breathtaking. Its long, flowing lines and pronounced curves exuded elegance, while the iconic waterfall grille and bullet-shaped headlights were hallmarks of its design. Inside, passengers were enveloped in luxury with plush seating and rich wood accents. The quality of materials—from the wool carpets to the leather upholstery—spoke volumes about the vehicle's opulence. Technologically, it boasted innovations such as an independent front suspension and hydraulic brakes, which were advanced features for its time. The color palette ranged from stately blacks to rich blues, with deep maroon being a particularly popular choice among discerning buyers. Body styles varied, but it was the limousine model that truly captured imaginations, offering unparalleled comfort and space for its prestigious clientele.
Historical Significance: A Benchmark in Automotive Elegance
The 1936 Buick Limited Series 90 set new standards in automotive design and luxury. It differentiated itself from its contemporaries with its sheer size and presence on the road. The car's impact resonated through subsequent generations of vehicles, influencing design cues and luxury features that are still appreciated today.
Performance and Handling: A Gentle Giant on the Road
Underneath its grand exterior lay a powerful straight-eight engine that propelled this heavyweight with surprising grace. While top speed figures may not compete with modern sports cars, for its time, it cruised effortlessly at highway speeds—a remarkable feat for such a substantial vehicle. Handling was smooth, absorbing road imperfections with ease thanks to its sophisticated suspension system. Driving a Series 90 was akin to commanding a well-oiled locomotive; there was power, there was poise, and there was an unmistakable sense of authority.
Ownership Experience: More Than Just a Car
Owners of the 1936 Buick Limited Series 90 typically reserved their prized possessions for special occasions or Sunday drives. Maintenance required a dedicated owner willing to preserve such craftsmanship. While reliability was commendable for its day, contemporary owners should be prepared for the intricacies involved in maintaining a classic car. Fun Facts: This automotive masterpiece found its way into the garages of celebrities and even royalty. Though not designed for racing, it held records in endurance for vehicles in its class. Despite criticisms over fuel consumption—a trivial concern for those who could afford such luxury—it remained an object of desire.
Collector's Information: A Coveted Classic
Today, collectors cherish the 1936 Buick Limited Series 90 for its rarity and historical significance. With only a few hundred believed to have been produced, each surviving example is a treasured find. Values can vary widely based on condition and provenance but expect figures well into six digits for pristine models. Over time, this vehicle has generally appreciated in value as enthusiasts seek to capture a piece of pre-war automotive history.
Conclusion: The Legacy Lives On
The 1936 Buick Limited Series 90 stands as an enduring icon of American luxury during an era that demanded nothing less than extraordinary. It is more than just a classic car; it is a rolling sculpture that embodies the spirit of innovation and opulence from a bygone age. For those fortunate enough to experience it firsthand, ownership is not just about possession—it's about preserving a chapter of automotive lore that continues to captivate hearts and minds across generations.
1936 Buick Limited Series 90 Catalog of Parts
1936 Buick Limited Series 90 Front Bumper Arm Grommets-BG 15-AFront Bumper Arm Grommets. 2-1/8" wide X 3-3/4" long, with 1-1/2" long inner slot. Pair
1936 Buick Limited Series 90 Rear Bumper Arm Grommets. For round bumper pads-BG 59Rear Bumper Arm Grommets. For round bumper pads. 3-5/8" wide X 3-9/16" long, with 1-7/16" I.D. Pair
1936 Buick Limited Series 90 Door Bumper. Exact reproduction-DB 14-ADoor Bumper. Exact reproduction. 1-3/16" high X 1-9/16" wide X 9/16" thick. Each
1936 Buick Limited Series 90 Upper Door Hinge Post Bumper. Held by screw-DB 60-AUpper Door Hinge Post Bumper. Held by screw. 7/8" diameter X 1/8" thick. Each
1936 Buick Limited Series 90 Inner and Outer Center Division Bar Seals-DP 20Inner and Outer Center Division Bar Seals. Each piece 14-1/4" long. Set
1936 Buick Limited Series 90 Gas filler grommet. Fits all models '36 Buick-GF 25Gas filler grommet. Fits all models '36 Buick. Fits '37 Buick Series 80/90. 2-1/8 in. ID; 4 in. OD. Dense black rubber. Each.
1936 Buick Limited Series 90 Rear Hood Corners. 1-1/4" wide. Pair-HC 29Rear Hood Corners. 1-1/4" wide. Pair
1936 Buick Limited Series 90 Trunk Seal. Sponge rubber. Sold by the foot.-LP 96-/FTTrunk Seal. Sponge rubber. Sold by the foot.
1936 Buick Limited Series 90 Motor Mounts. 2" O.D., 9/16" I.D. Pair-MM 23Motor Mounts. 2" O.D., 9/16" I.D. Pair
1936 Buick Limited Series 90 Front Motor Mounts. 3-1/2", 1-7/8", 1/2" I.D. Pair-MM 24Front Motor Mounts. 3-1/2", 1-7/8", 1/2" I.D. Pair
1936 Buick Limited Series 90 Tail-light Pads. 2-3/8" wide X 5-5/8" long. Pair-MP 135Tail-light Pads. 2-3/8" wide X 5-5/8" long. Pair
1936 Buick Limited Series 90 License Light Pad. 2-3/8" wide X 2-3/4" long. Each-MP 135-BLicense Light Pad. 2-3/8" wide X 2-3/4" long. Each
1936 Buick Limited Series 90 Park Light Pads. Fits 1-1/16" wide metal-MP 136Park Light Pads. Fits 1-1/16" wide metal. 1-1/2" wide X 10-1/4" long. Pair
1936 Buick Limited Series 90 Park Light Pads. Fits 7/8" wide metal-MP 137Park Light Pads. Fits 7/8" wide metal. 1-1/8" wide X 10-1/4" long. Pair
1936 Buick Limited Series 90 Park Light Pads. Fits 1-1/8" metal-MP 143Park Light Pads. Fits 1-1/8" metal. 1-1/2 wide X 9-3/8" long. Pair
1936 Buick Limited Series 90 Headlight Pads. 3" wide X 8-5/8" long. Pair-MP 190Headlight Pads. 3" wide X 8-5/8" long. Pair
1936 Buick Limited Series 90 Tail-light Pads. 2" wide X 5-3/8" long. Pair-MP 200Tail-light Pads. 2" wide X 5-3/8" long. Pair
1936 Buick Limited Series 90 Rumble Seat Step-Plate Pad. 3-1/4" wide X 5" long. Each-MP 311Rumble Seat Step-Plate Pad. 3-1/4" wide X 5" long. Each
1936 Buick Limited Series 90 Door Handle Ferrule Grommet. I.D. 11/16", O.D. 1-3/16"-MP 546-IDoor Handle Ferrule Grommet. I.D. 11/16", O.D. 1-3/16". Each
1936 Buick Limited Series 90 Windshield Wiper Transmission Pad-MP 546-YWindshield Wiper Transmission Pad. 2-1/2" wide X 1-1/4" long. Each
1936 Buick Limited Series 90 Cowl Vent Seal. 3-1/4" wide X 15-5/8" long. Each-RP 100-JCowl Vent Seal. 3-1/4" wide X 15-5/8" long. Each
1936 Buick Limited Series 90 Door Lock Knob. Brown. 1/2" diameter X 1" long X 1/8" hole-RP 303Door Lock Knob. Brown. 1/2" diameter X 1" long X 1/8" hole. Each
1936 Buick Limited Series 90 Door Bumper. 1" diameter X 1/4" thick Each-SB 60Door Bumper. 1" diameter X 1/4" thick Each
1936 Buick Limited Series 90 Spare Tire Mount Bumper. 5/8" square. Each-SB 80Spare Tire Mount Bumper. 5/8" square. Each
1936 Buick Limited Series 90 Firewall grommet for headlight and tail-light wires-SM 34Firewall grommet for headlight and tail-light wires. Fits 11/16" hole. 5/16" I.D., 15/16" O.D. Each
1936 Buick Limited Series 90 Trunk Seal for Coupes and Convertibles Only-TK 58-B/18Trunk Seal for Coupes and Convertibles Only. 1" wide X 1/2" thick. Each
1936 Buick Limited Series 90 Trunk Seal, for Sedans. Each-TK 96-15Trunk Seal, for Sedans. Each
1936 Buick Limited Series 90 Vertical Seal for Vent Window. Each is 17" long. Pair-VS 2Vertical Seal for Vent Window. Each is 17" long. Pair
1936 Buick Limited Series 90 Flexible glass-run channel-WC 11-72Flexible glass-run channel. Mohair lined, cloth covered with stainless steel bead. Used on side windows. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned in two equal lengths to reduce overseas shipping costs.
1936 Buick Limited Series 90 Rigid division-bar channel. Made with stainless steel bead-WC 2-72Rigid division-bar channel. Made with stainless steel bead. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.
1936 Buick Limited Series 90 Flexible Rubber Window Channel-WC 32-14Flexible Rubber Window Channel. For Fisher Closed Bodies, except those using a stainless bead type. Used on side windows. 13/16" outer width X 6/16" outer depth, with a 5/16" inner channel width X 14" long. Each
1936 Buick Limited Series 90 Flexible sweeper. Made with stainless steel bead-WC 8-72Flexible sweeper. Made with stainless steel bead. Used on inner and outer beltlines. Also forms easily for use with sliding quarter windows. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.
1936 Buick Limited Series 90 Fender Bolts. For use with Fender Bolt Washers; WF 3001-WF 3000Fender Bolts. For use with Fender Bolt Washers; WF 3001. Zinc Chromate plated, high strength. 1" X 5/16". Set of 25
1936 Buick Limited Series 90 Fender Bolt Washers. For use with Fender Bolts; WF 3000-WF 3001Fender Bolt Washers. For use with Fender Bolts; WF 3000. High quality, cadmium plated. 1-1/4" O.D., 3/8" I.D. Set of 25
1936 Buick Limited Series 90 Front Vent Window Seals. Does not fit Convertible-WR 7317Front Vent Window Seals. Does not fit Convertible. Pair R&LWhy Choose Metro?
For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.
- Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
- Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
- SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
- Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
- Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.
Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.