null
×
close

Seals

High quality seals to keep water and dirt out

Adhesive Backed

Acrylic or heat activated tape attached directly to the seal

Adhesive Backed
Window

A large variety of seals for your windows

Window
Door Seals

Primary and secondary seals fitting on the body or door

Door Seals
Body Seals

Fender welt, windlace, bumper to body seals, header seals, trunk seals, and convertible top welt

Body Seals
Glass & Edge Seals

Used to finish off metal edges or install glass

Glass & Edge Seals
sidebar:
  • WC 29-72

    Rigid division-bar channel - WC 29-72

    $57.55

    Rigid division-bar channel. Made with stainless steel bead, pile lining and heavy steel core. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two...

  • WC 28-96

    Rigid division-bar channel - WC 28-96

    $72.32

    Rigid division-bar channel. Made with stainless steel bead, heavy steel core and pile lining. 96 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned in two or...

  • WC 26-72

    Flexible glass-run channel - WC 26-72

    $56.99

    Flexible glass-run channel. For models without framed side glass. Unbeaded, pile-lined. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal...

  • WC 15-72

    Flocked Glass Run Channel - WC 15-72

    $24.47

    Flocked Glass Run Channel. Used on upper and lower division bars, Plus around top and rear of side windows. 72" Piece. EachFeaturesAccurate seal profilesSuperior form and function

  • WC 13-96

    Rigid window sweeper - WC 13-96

    $79.99

    Rigid window sweeper. Made with stainless steel top, rubber lip and flocked bottom. 96 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned in two or three equal...

  • WC 11-72

    Flexible glass-run channel - WC 11-72

    $65.42

    Flexible glass-run channel. Mohair lined, cloth covered with stainless steel bead. Used on side windows. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned in...

  • WC 10-96

    Flexible window channel - WC 10-96

    $79.99

    Flexible window channel. Rubber covered with mohair lining and stainless steel bead. 96 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned in two or three equal...

  • VS 7-A

    Rear Roll-Up Window Seals. Two pieces, 20" long - VS 7-A

    $26.49

    Rear Roll-Up Window Seals. Two pieces, 20" long. Replaces OEM #2782560-1. PairFeaturesNone of Metro's parts use accelerants or cheap fillers in the molding processes which can cause the part to prematurely age and fail.Made from state-of-the-art rubber...

  • VS 2/FT

    Vertical Seal for Vent Window. Sold by the foot. - VS 2/FT

    $5.99

    Vertical Seal for Vent Window. Sold by the foot.FeaturesNone of Metro's parts use accelerants or cheap fillers in the molding processes which can cause the part to prematurely age and fail.Made from state-of-the-art rubber compounds with sunlight ozone...

  • TS 9-12

    Door and Trunk Trim Seal - TS 9-12

    $87.85

    Door and Trunk Trim Seal. General purpose, may also be used for roof, quarter window, etc. Made of vinyl and rubber. 12' length. EachFeaturesMade from the highest quality EPDM rubberEasy Installation

  • TS 7-12

    Pinchweld Trim Seal - TS 7-12

    $93.43

    Pinchweld Trim Seal. Made of vinyl and rubber, with a steel core. 12' length. EachFeaturesMade from the highest quality EPDM rubberEasy Installation

  • TS 10-25

    Door and Trunk Trim Seal - TS 10-25

    $175.65

    Door and Trunk Trim Seal. General purpose, may also be used for roof, quarter window, etc. Made of vinyl and rubber. 25' length. EachFeaturesMade from the highest quality EPDM rubberEasy Installation

  • TS 10-12

    Door and Trunk Trim Seal - TS 10-12

    $87.85

    Door and Trunk Trim Seal. General purpose, may also be used for roof, quarter window, etc. Made of vinyl and rubber. 12' length. EachFeaturesEasy InstallationMade from the highest quality EPDM rubber

  • TS 1-25

    Pinchweld Trim Seal - TS 1-25

    $172.50

    Pinchweld Trim Seal. Made of vinyl and rubber, with a steel core. 25' length. EachFeaturesEasy InstallationMade from the highest quality EPDM rubber

  • TS 1-12

    Pinchweld Trim Seal - TS 1-12

    $93.43

    Pinchweld Trim Seal. Made of vinyl and rubber, with a steel core. 12' length. EachFeaturesEasy InstallationMade from the highest quality EPDM rubber

  • MW 51634

    Adhesive Backed Weatherstripping - MW 51634

    $10.45

    Adhesive Backed Weatherstripping. 3/4" wide X 5/16" thick X 10' long. EachFeaturesMade from state-of-the-art rubber compounds with sunlight ozone and chemical resistant materialsMade in the USA

  • MW 31634

    Adhesive Backed Weatherstripping - MW 31634

    $9.08

    Adhesive Backed Weatherstripping. 3/4" wide X 3/16" thick X 10' long. EachFeaturesMade in the USAMade from state-of-the-art rubber compounds with sunlight ozone and chemical resistant materials

Why Buy From Metro Moulded Parts

  • Metro parts are made with a proprietary closed micro-cell technology. All parts have very smooth skin that is free of exposed cells or flaws. Furthermore, you can be confident that your parts will continue to retain a uniform size, provide even compression, and retain superior memory. Other brands are coated with an outer latex skin that will bruise, gall, blister, glaze, crack, and peel.

  • We use the latest advancements in CAD and CNC milling for proper 3D contouring, assuring a perfect fit and OEM quality appearance. Our molds are milled from single metal blocks to tolerances of 0.001 in. to minimize flash lines in finished parts. Mold cavities are polished regularly to product parts with high luster and smooth contours.

  • Metro parts are made locally in the USA.

  • All Metro parts are guaranteed for a full 15 years. Each part comes with a certificate of guarantee. We promise that if your Metro made part fails at any time during that time they'll replace it free of charge. That's their "No Hassle" guarantee. Don't settle for a simple promise of satisfaction. Metro's warranty is the best you can get! Bar none!

  • Metro parts are 30% softer and more durable than other brands. Simply the softest reproduction in the market.

  • In addition, Metro parts provides extraordinary resistance to hardening and decay caused by exposure to ozone and UV light.

  • None of Metro's parts use accelerants or cheap fillers in the molding processes, which can cause the part to prematurely age and fail.

Customer Reviews

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help