null
×
close
1967 Cadillac Fleetwood Catalog and Classic Car Guide, Ratings and Features

Image of 1967 Cadillac Fleetwood, sourced from www.classicautomall.com , Image Link.

Performance Metrics

Performance: +60
Handling: +45
Ride Comfort: +85

Fundamental Metrics

Safety: +40
Maintenance and Upkeep: +70
Restoration Difficulty: +65

Emotional Appeal

Looks: +80
Collectability: +75
Historical Significance: +60

MMP Rating

7 /10
Engine Specifications
Engine: 429 CID V8
Displacement: 429 cubic inches (7.0 liters)
Horsepower: 340-360 hp
Torque: 480 lb-ft
Compression Ratio: 10.5:1
Ignition System: Conventional, distributor
Cooling System: Liquid-cooled
Performance Specifications
0-60 Time: 8.5 seconds
1/4 Mile Time: 16 seconds
Top Speed: 130 mph
Transmission and Drive
Drive Type: Rear-wheel drive
Transmission Type: 3-speed automatic
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: 10-12 mpg
Dimensions and Brakes
Brakes: Power-assisted drum brakes
Wheelbase: 133 inches
Weight: 4,600 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

Introduction

The 1967 Cadillac Fleetwood stands as a towering testament to American luxury and automotive prowess. Born from the ambitious visions of General Motors, this vehicle not only encapsulated the era's opulence but also showcased the zenith of engineering and design of its time. The Fleetwood series, named after the renowned Fleetwood Metal Body Company, which Cadillac acquired in the 1930s, became synonymous with luxury. A unique fact that sets this vehicle apart is its cameo in the realm of presidential transport – it was during this era that Cadillac Fleetwoods served as the preferred choice for U.S. Presidents.

Design and Innovation

The exterior of the 1967 Cadillac Fleetwood was a harmonious blend of bold lines and refined elegance. Its long, imposing body, accented with tasteful chrome trimmings, exuded a sense of grandeur that was unmistakable on the road. Inside, occupants were greeted with an interior that was nothing short of palatial. Plush leather seats, rich wood paneling, and carpeting thick enough to silence the outside world spoke volumes about the quality of materials used.

Technologically, it was ahead of its time, featuring innovations such as automatic climate control and an advanced suspension system for a smooth ride. Color options ranged from subdued to vibrant, with popular choices including Sable Black and Venetian Blue. The most iconic body style was undoubtedly the sedan, which offered unparalleled space and comfort.

Historical Significance

The 1967 Fleetwood's impact on automotive design was profound. It set a benchmark for what a luxury car should be – powerful, comfortable, and visually stunning. This model stood out with its level of craftsmanship and attention to detail, which influenced subsequent generations of luxury vehicles.

Performance and Handling

Underneath its stately exterior lay a potent 429 cubic inch V8 engine that propelled the Fleetwood with authority. Its top speed was impressive for such a sizable vehicle, while acceleration from 0-60 mph was achieved in a manner befitting its dignified image – swiftly yet smoothly. On various driving conditions, the car maintained composure thanks to its sophisticated suspension system. The driving experience was akin to commanding a well-oiled machine; every turn of the wheel and press of the pedal felt deliberate and controlled.

Ownership Experience

The 1967 Cadillac Fleetwood was more than just a means of transportation; it was a status symbol. While some used it as a daily driver or show car, others enjoyed its prowess in more spirited driving scenarios. Maintenance required dedication due to its complex mechanics and sheer size but proved reliable with proper care. Repairing such a vehicle today would require specialized knowledge due to its vintage status.

Fun Facts

This model has graced various collections worldwide, including those owned by celebrities and dignitaries. It has also made appearances in films and television shows set in the '60s era, further cementing its cultural significance.

Collector's Information

The current value range for collectors varies widely based on condition and provenance but can reach well into six figures for pristine examples. With production numbers estimated in the tens of thousands for various Fleetwood models during that year, rarity can vary significantly. Over time, well-maintained models have appreciated in value as they've become more desirable among classic car enthusiasts.

Conclusion

The 1967 Cadillac Fleetwood is more than just an old car; it's a piece of automotive history that represents American luxury at its peak. Its combination of design excellence, technological innovation, and commanding presence has left an indelible mark on the automotive landscape.

1967 Cadillac Fleetwood Catalog of Parts

1967 Cadillac Fleetwood Upper door-lock pillar seal. 2-door hardtop and convertible-ALP 5053 1967 Cadillac Fleetwood Upper door-lock pillar seal. 2-door hardtop and convertible-ALP 5053Upper door-lock pillar seal. 2-door hardtop and convertible. Does not fit Fastback models. Made with all details and galvanized steel cores. 2-3/16 in. W x 4-11/16 in. L. Pair. R&L.

1967 Cadillac Fleetwood Shock Absorber Grommet.  1 bottom O.D., 3/4 high-BN 1 1967 Cadillac Fleetwood Shock Absorber Grommet. 1" bottom O.D., 3/4" high-BN 1Shock Absorber Grommet. 1" bottom O.D., 3/4" high., with 7/16" I.D. Each

1967 Cadillac Fleetwood Front coil-spring insulator-BN 110 1967 Cadillac Fleetwood Front coil-spring insulator-BN 110Front coil-spring insulator. Fits '41-'60 Oldsmobile and '50-'83 GM passenger models. 5-3/8 in. OD x 3-3/4 in. ID x 3/4 in. high with 13/16 in. wide bottom flange 1/4" thick, 12 flutes. Each.

1967 Cadillac Fleetwood Spring and Shackle Bushing.  1-1/8 bottom O.D-BN 17 1967 Cadillac Fleetwood Spring and Shackle Bushing. 1-1/8" bottom O.D-BN 17Spring and Shackle Bushing. 1-1/8" bottom O.D. X 1-3/4" high, with 5/8" I.D. Each

1967 Cadillac Fleetwood Front Stabilizer End Repair Kit-BNK 21 1967 Cadillac Fleetwood Front Stabilizer End Repair Kit-BNK 21Front Stabilizer End Repair Kit. 22-piece set for two stabilizer bars. Contains all rubber bushings, washers, bolts and nuts, enough for one front end. Set

1967 Cadillac Fleetwood Butyl Glass Setting Tape-BT 1 1967 Cadillac Fleetwood Butyl Glass Setting Tape-BT 1Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16" wide X 15' long. Each

1967 Cadillac Fleetwood Hood Bumper Cap, for adjustment bolt.  Up to 5 used per car-HA 11 1967 Cadillac Fleetwood Hood Bumper Cap, for adjustment bolt. Up to 5 used per car-HA 11Hood Bumper Cap, for adjustment bolt. Up to 5 used per car. 1-1/16" O.D., 5/8" high. Each


1967 Cadillac Fleetwood Trip Meter Reset Knob.  Made of black rubber-KN 10 1967 Cadillac Fleetwood Trip Meter Reset Knob. Made of black rubber-KN 10Trip Meter Reset Knob. Made of black rubber. Compare to measurements: 1/8" I.D., 7/16" O.D. X 1/2" tall. Each

1967 Cadillac Fleetwood Front Molded Door Seals with Clips.  For 4-Door Sedan Only-LM 21-F 1967 Cadillac Fleetwood Front Molded Door Seals with Clips. For 4-Door Sedan Only-LM 21-FFront Molded Door Seals with Clips. For 4-Door Sedan Only. Pair R&L

1967 Cadillac Fleetwood Rear Molded Door Seals with Clips.  For 4-Door Sedan Only-LM 21-F/R 1967 Cadillac Fleetwood Rear Molded Door Seals with Clips. For 4-Door Sedan Only-LM 21-F/RRear Molded Door Seals with Clips. For 4-Door Sedan Only. Pair R&L

1967 Cadillac Fleetwood Trunk Liner.  Loose weave-M 23 1967 Cadillac Fleetwood Trunk Liner. Loose weave-M 23Trunk Liner. Loose weave. Black with scattered white threads. 54" wide. Sold by the foot

1967 Cadillac Fleetwood Brake Master Cylinder Cover Seal.  Replaces OEM #5470861-RP 2-E 1967 Cadillac Fleetwood Brake Master Cylinder Cover Seal. Replaces OEM #5470861-RP 2-EBrake Master Cylinder Cover Seal. Replaces OEM #5470861. 5" X 2-1/2". Each



1967 Cadillac Fleetwood Positive Crankcase Ventilation Grommet-RP 9 1967 Cadillac Fleetwood Positive Crankcase Ventilation Grommet-RP 9Positive Crankcase Ventilation Grommet. 11/16" wide X 1-5/8" long, with 15/16" I.D. (Fits some models) Each

1967 Cadillac Fleetwood Trunk Bumper.  Fits lower corner on decklid.  15/16 O.D-SB 34 1967 Cadillac Fleetwood Trunk Bumper. Fits lower corner on decklid. 15/16" O.D-SB 34Trunk Bumper. Fits lower corner on decklid. 15/16" O.D., 11/16" high. Each

1967 Cadillac Fleetwood Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35 1967 Cadillac Fleetwood Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35Door Bumper, 57-74 GM Cars, made with twin retainers, Each. Measure 1-1/16" high X 19/32" wide X 1-1/32" long.

1967 Cadillac Fleetwood Seat Bumper.  Made with steel core like original-SB 62-A 1967 Cadillac Fleetwood Seat Bumper. Made with steel core like original-SB 62-ASeat Bumper. Made with steel core like original. 1-1/2" long, 7/16" thick. Two used per car. Each

1967 Cadillac Fleetwood Clutch Pedal Return Bumper-SB 64 1967 Cadillac Fleetwood Clutch Pedal Return Bumper-SB 64Clutch Pedal Return Bumper. 1-13/16" long X 13/16" wide X 7/8" high (center). Each




1967 Cadillac Fleetwood Dash and Firewall Grommet.  Single-hole type is for one wire-SM 101 1967 Cadillac Fleetwood Dash and Firewall Grommet. Single-hole type is for one wire-SM 101Dash and Firewall Grommet. Single-hole type is for one wire. Each



1967 Cadillac Fleetwood Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-A 1967 Cadillac Fleetwood Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-AFirewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L. Replaces OEM#'s (GM) 7642589 and (AMC) 4001934. Black. Each.


1967 Cadillac Fleetwood Unbeaded Door and Trunk Lock Gasket.  1-3/16 O.D., 7/8 I.D-UM 1600-100 1967 Cadillac Fleetwood Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D-UM 1600-100Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D. Each

Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help