Image of 1967 Chevrolet C10 Pickup, Note: These illustrations use artistic license and may differ from actual historical models.
Performance Metrics
Fundamental Metrics
Emotional Appeal
MMP Rating
| Engine Specifications | |
|---|---|
| Engine Options: | 250 I6, 283 V8, 327 V8 |
| Displacement Range: | 250-327 cubic inches |
| Horsepower Range: | 155-275 hp |
| Torque: | 235-355 lb-ft |
| Compression Ratio: | 8.25:1 - 10.5:1 |
| Ignition System: | Conventional breaker-point ignition system |
| Cooling System: | Liquid-cooled |
| Performance Specifications | |
| 0-60 Time: | Estimated 8-10 seconds |
| 1/4 Mile Time: | Estimated 16-18 seconds |
| Top Speed: | 100-120 mph |
| Transmission and Drive | |
| Drive Type: | Rear-wheel drive |
| Transmission Type: | 3-speed manual, 4-speed manual, 2-speed Powerglide automatic, 3-speed Turbo-Hydramatic automatic |
| Fuel and Efficiency | |
| Fuel System Type: | Carburetor |
| MPG: | Estimated 10-15 mpg |
| Dimensions and Brakes | |
| Brakes: | Drum brakes front and rear |
| Wheelbase: | 115 inches (short bed), 127 inches (long bed) |
| Weight: | 3,200-3,800 lbs |
Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.
The Quintessential American Classic: The 1967 Chevrolet C10 Pickup
The year 1967 saw the birth of a vehicle that would become an emblem of American automotive culture: the Chevrolet C10 Pickup. This truck wasn't just a means of transportation; it was a statement of rugged individualism and engineering prowess. Crafted by the storied Chevrolet division of General Motors, the C10 emerged during a time when trucks were transitioning from strictly utilitarian workhorses to vehicles that could offer both performance and comfort. One unique fact that endears the '67 C10 to enthusiasts is its introduction of modern conveniences to the pickup world, such as air conditioning and a coil spring suspension for improved ride quality.
Design and Innovation
The 1967 Chevrolet C10 Pickup is a masterpiece of mid-century automotive design. Its exterior styling features clean lines, a broad grille, and a curvaceous body that exudes strength and simplicity. The interior was a leap forward in comfort, with a well-appointed cabin that boasted durable yet attractive materials, signaling the C10's dual-purpose nature. Technological advancements included an optional 327 cubic inch V8 engine, a testament to Chevy's commitment to power and reliability. Color options ranged from dignified hues like Deepwater Blue to vibrant choices such as Red Hot, with the latter often catching the eye of collectors. Among the various body styles, the Fleetside remains an iconic symbol of this model's enduring appeal.
Historical Significance
The '67 C10's impact on automotive design was profound. It challenged the notion that trucks had to be austere and uncomfortable, setting a new standard for what a pickup could be. Its blend of style, performance, and utility paved the way for today's versatile trucks. The C10 stood out with its independent front suspension, a feature that would become the norm in later years, highlighting Chevy's innovative spirit.
Performance and Handling
Performance-wise, the '67 C10 was no slouch. With the right powertrain, it could achieve respectable acceleration figures, hustling from 0-60 mph in under 10 seconds—a notable feat for a vehicle of its size during that era. Handling was significantly improved over previous generations, thanks to the aforementioned coil spring suspension which absorbed road imperfections with ease. Driving a C10 was an immersive experience; the rumble of the V8 engine, the solid feel of the steering, and the commanding view of the road created a sense of connection between man and machine.
Ownership Experience
Owners of the 1967 Chevrolet C10 Pickup used their vehicles for everything from daily chores to weekend show-and-shines. Its reliability and ease of repair made it a favorite among those who valued practicality and simplicity. While some components are now considered classic and may require specialist attention, the C10's mechanical robustness means that many examples are still on the road today.
Fun Facts
The '67 C10 has its share of trivia that adds to its charm. For instance, certain special editions are highly sought after, like the Custom Sport Truck (CST) package that added a touch of luxury to this rugged pickup. Celebrity ownerships have also elevated its status; renowned figures in music and film have been known to cruise in a C10. While it didn't break speed records, it set benchmarks for sales and popularity among pickups.
Collector's Information
Today, the value range for a well-preserved 1967 Chevrolet C10 can vary widely, with pristine examples fetching upwards of $50,000 or more at auction. Production numbers were substantial, but finding one in mint condition is becoming increasingly challenging. The market trend shows appreciation for this classic truck as nostalgia and the desire for authentic Americana continue to grow among collectors.
Conclusion
The 1967 Chevrolet C10 Pickup is more than just a vintage vehicle; it's a slice of American history on wheels. Its blend of style, performance, and practicality has cemented its place in the pantheon of classic trucks. Whether you're a collector or simply someone who appreciates automotive heritage, the C10 is a testament to an era when craftsmanship and utility went hand in hand. As we look back on over half a century since its release, the Chevy C10 continues to turn heads and captivate hearts, proving that some classics never go out of style.
1967 Chevrolet C10 Pickup Catalog of Parts
1967 Chevrolet C10 Pickup Rear body cushion kit. '67-'72 Chevy pick-ups-BCK 103Rear body cushion kit. '67-'72 Chevy pick-ups. Component BC 103/CPA: 1-11/16 in. dia. top; 2-1/2 in. dia. bottom; 7/8 in. dia. thru-hole; 1-7/16 in. high. Component BC 103/CPB: 3-1/2 in. dia.; 13/16 in. dia. thru-hole; 1-3/8 in. dia. thru-hole flange; 1-3/8 in. thick main body. Replaces OEM# 3974348. 2-piece set. Uses two (2) sets per truck.
1967 Chevrolet C10 Pickup Body Cushion Kit. 10 piece set.-BCK 203Body Cushion Kit, 67-72 Chevy trucks. 10 piece set.
1967 Chevrolet C10 Pickup Shock Absorber Grommet. 1" bottom O.D-BN 11Shock Absorber Grommet. 1" bottom O.D., 3/4" high, with 5/8" I.D. Each
1967 Chevrolet C10 Pickup Clutch and Brake Pedal Pad. Perfect-CB 100-EACHClutch and Brake Pedal Pad. Perfect. 2-5/8" wide X 3-3/4" long. Each
1967 Chevrolet C10 Pickup Clutch and Brake Pedal Pads. Perfect-CB 100-PAIRClutch and Brake Pedal Pads. Perfect. 2-5/8" wide X 3-3/4" long. Pair
1967 Chevrolet C10 Pickup Clutch and Brake Pedal Pads. Good Reproduction-CB 101-BClutch and Brake Pedal Pads. Good Reproduction. 3-3/4" wide X 2-5/8" long. Pair
1967 Chevrolet C10 Pickup Hood to Cowl Seal, 67-72 GM Full Size Trucks and SUV's, Each-CS 60-AThis seal mounts to the firewall and seals against the hood. Our product is made from the original specs and from high quality ozone resistant materials for a great fit and long life.
1967 Chevrolet C10 Pickup Hood to Fender Bumper. Top opening 5/8" wide. Each-HF 32-AHood to Fender Bumper. Top opening 5/8" wide. Each
1967 Chevrolet C10 Pickup Molded Door Seals with Mitered Corners. 166-1/2" long each-LM 13-HMolded Door Seals with Mitered Corners. 166-1/2" long each. Pair R&L
1967 Chevrolet C10 Pickup Door Panel Insulation Kit-LPK 44-TDoor Panel Insulation Kit
1967 Chevrolet C10 Pickup Back-up (Cargo) Light Gasket. 2-3/4" X 5-7/8" I.D-MB 2002Back-up (Cargo) Light Gasket. 2-3/4" X 5-7/8" I.D., 3-3/8" X 7" O.D.Each
1967 Chevrolet C10 Pickup Rear Lower Motor Mount. Two used per vehicle-MM 20-ARear Lower Motor Mount. Two used per vehicle. Replaces OEM #3789949. Each
1967 Chevrolet C10 Pickup Door Handle Pads. 3-1/8" long & 1" long. Set-MP 547-JDoor Handle Pads. 3-1/8" long & 1" long. Set
1967 Chevrolet C10 Pickup Dash & Firewall Grommet. Double-hole type for two wires-RP 1-GDash & Firewall Grommet. Double-hole type for two wires. For heater motor & accessory wires. 15/16" O.D., fits 5/8" sheet metal hole. Each
1967 Chevrolet C10 Pickup Heater Box to firewall Gasket. 6-3/4" O.D., 4-3/4" I.D-RP 300-THeater Box to firewall Gasket. 6-3/4" O.D., 4-3/4" I.D. Each
1967 Chevrolet C10 Pickup Clutch Pedal Bumper. 5/8" X 7/8" X 9/16" high. Each-RP 30-CClutch Pedal Bumper. 5/8" X 7/8" X 9/16" high. Each
1967 Chevrolet C10 Pickup Dash and Firewall Grommet. Single-hole type is for one wire-SM 101Dash and Firewall Grommet. Single-hole type is for one wire. Each
1967 Chevrolet C10 Pickup Dash and Firewall Grommet. Two hole type. Each-SM 101-ADash and Firewall Grommet. Two hole type. Each
1967 Chevrolet C10 Pickup Windshield seal, '67-'72 Chevrolet & GMC C/K series, with trim groove-VWS 7313Windshield seal, '67-'72 Chevrolet & GMC C/K series truck/Suburban, '69-'70 Chevy Blazer, '70 GMC Jimmy, with groove to accept trim, each.
1967 Chevrolet C10 Pickup Windshield seal, '67-'72 Chevrolet & GMC C/K series, no trim groove-VWS 7313-AWindshield seal, '67-'72 Chevrolet & GMC C/K series truck/Suburban, '69-'72 Chevy Blazer, '70-'72 GMC Jimmy, without trim groove, each. Replaces OEM part # 3968174.
1967 Chevrolet C10 Pickup Rear window seal, '67-'68 Chevrolet & GMC C/K series truck with small window-VWS 7313-RRear window seal, '67-'68 Chevrolet & GMC C/K series truck with small window, each.
1967 Chevrolet C10 Pickup Rear window seal, '67-'72 Chevrolet & GMC C/K, large window, no trim groove-VWS 7313-SRear window seal, '67-'72 Chevrolet & GMC C/K series truck with large rear window without trim groove, each. Replaces OEM part # 3940758.
1967 Chevrolet C10 Pickup Rear window seal, '67-'72 Chevrolet & GMC C/K, large window, trim groove-VWS 7313-TRear window seal, '67-'72 Chevrolet & GMC C/K series truck with large rear window with trim groove, each.
1967 Chevrolet C10 Pickup Upper and lower rigid division-bar channel-WC 25-72Upper and lower rigid division-bar channel. Unbeaded, pile-lined. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.
1967 Chevrolet C10 Pickup Rigid division-bar channel-WC 29-72Rigid division-bar channel. Made with stainless steel bead, pile lining and heavy steel core. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.
1967 Chevrolet C10 Pickup Window Channel Run-Upper, 67-72 GM Full Size Truck and SUV, Each-WC 33-60Window Channel Run-Upper, 67-72 GM Full Size Truck and SUV, Each. Fits Either Left or Right Side. Replaces OEM # 3893719.
1967 Chevrolet C10 Pickup Flocked Glass Run Channel-WC 33-96Flocked Glass Run Channel. For models with framed side glass. 96" Piece. Each
1967 Chevrolet C10 Pickup Window Sweeper Kit. Inner and Outer Sweepers. 4-Piece Kit-WC 5900-10Window Sweeper Kit. Inner and Outer Sweepers. 4-Piece Kit
1967 Chevrolet C10 Pickup Window Sweeper Kit, 67-72 GM Truck and SUV, With Chrome Bead, Set of 4-WC 5900-14Protect your vehicle’s interior from the outside elements and reduce noise level while driving simply by replacing your dried-out or cracked weatherstrip with a proven product that’s preferred in the industry. The seals mount with the pre-applied clips on the top inner and outer part of the door to squeegee the door glass. This is a great looking 4 piece chrome bead set for both driver and passenger doors. These beltlines are made from the OEM specs to ensure a great fit and an authentic appearance.
1967 Chevrolet C10 Pickup Vent Window Seals. Replaces OEM part numbers 3925965/3925966-WR 2005-AVent Window Seals. Replaces OEM part numbers 3925965/3925966. PairWhy Choose Metro?
For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.
- Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
- Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
- SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
- Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
- Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.
Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.