Image of 1967 Chevrolet Chevy Ii, Note: These illustrations use artistic license and may differ from actual historical models.
Performance Metrics
Fundamental Metrics
Emotional Appeal
MMP Rating
| Engine Specifications | |
|---|---|
| Engine Options: | 194 I6, 230 I6, 250 I6, 283 V8, 327 V8 |
| Displacement Range: | 194-327 cu in |
| Horsepower Range: | 120-350 hp |
| Torque: | 177-360 lb-ft |
| Compression Ratio: | 8.5:1 - 10.5:1 |
| Ignition System: | Conventional, distributor |
| Cooling System: | Liquid-cooled |
| Performance Specifications | |
| 0-60 Time: | 7.5 - 8.5 seconds |
| 1/4 Mile Time: | 15.5 - 16.5 seconds |
| Top Speed: | 120 mph |
| Transmission and Drive | |
| Drive Type: | Rear-wheel drive |
| Transmission Type: | 3-speed manual, 4-speed manual, 2-speed automatic, 3-speed automatic |
| Fuel and Efficiency | |
| Fuel System Type: | Carburetor |
| MPG: | 15-20 mpg |
| Dimensions and Brakes | |
| Brakes: | Drum brakes |
| Wheelbase: | 110 inches |
| Weight: | 2,700 - 3,200 lbs |
Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.
1967 Chevrolet Chevy II: A Compact Icon
The 1967 Chevrolet Chevy II is a testament to American ingenuity and a symbol of the golden era of muscle cars. Born from the competitive pressures of the 1960s automotive market, this compact vehicle made a significant mark with its blend of simplicity and performance. Crafted by Chevrolet, a division of General Motors, the Chevy II was designed to offer consumers an affordable and reliable alternative to the burgeoning compact car market. Its historical significance is further underscored by its role in paving the way for its legendary successor, the Chevrolet Nova. A unique fact that car enthusiasts may find fascinating is that the '67 Chevy II was one of the last to bear its original nameplate before transitioning to the Nova branding entirely.
Design and Innovation
The exterior styling of the 1967 Chevy II exudes classic American muscle aesthetics with clean lines and a no-nonsense stance. The car's design was straightforward yet appealing, featuring minimal chrome trim and a grille that was both functional and stylish. Inside, the cabin offered a balance between comfort and utility, with durable materials that could withstand daily use. Technological features for its time included an optional push-button AM radio and a heater/defroster system. Color options ranged from Bolero Red to Marina Blue, with Ermine White being a popular choice among enthusiasts. Body styles included a two-door coupe, four-door sedan, convertible, and station wagon, with the sporty Super Sport (SS) package being highly sought after for its enhanced performance appeal.
Historical Significance
The 1967 Chevy II stood out for its straightforward engineering and ease of maintenance, influencing future designs that prioritized user-friendly mechanics. Its compact size coupled with available V8 powerplants set it apart from many contemporaries that were either too bulky or underpowered. The model's lasting influence can be seen in subsequent generations of compact performance cars that sought to balance practicality with horsepower.
Performance and Handling
Performance-wise, the '67 Chevy II could be equipped with engines ranging from an economical inline-six to a robust 327 cubic-inch V8 capable of propelling the car to impressive speeds for its class. Top speed and acceleration varied by engine choice, but models fitted with the V8 could achieve 0-60 mph in under 8 seconds—a respectable figure for the era. Handling was characterized by a compliant ride that managed bumps adequately while maintaining composure on windy roads. Drivers often praised the visceral experience—the throaty rumble of the engine and the direct feedback from the steering wheel—creating an engaging driving dynamic.
Ownership Experience
As versatile as it was attractive, the Chevy II served various roles from a reliable daily driver to a weekend show car or even as a base for drag racing builds. Maintenance was relatively straightforward, making it accessible for average owners to perform repairs themselves. Reliability was one of its strong suits; however, like any classic car, upkeep is key to preserving its condition.
Fun Facts
A few fun facts about this classic include rare editions like the L79 optioned models which boasted a high-performance V8 engine. While not as common as celebrity ownerships today, some notable figures in history did own Chevy IIs. The vehicle also held its own in sales figures against competitors at the time. Common criticisms often centered around its conservative styling compared to more flamboyant models of the era.
Collector's Information
In today's market, a well-maintained 1967 Chevrolet Chevy II can fetch anywhere from $15,000 to over $50,000 depending on condition, originality, and specific model variant—with SS versions commanding higher prices. Estimates suggest that tens of thousands were produced; however exact numbers vary by source. As for price trends, values have been steadily appreciating over time as demand for authentic American muscle cars remains strong among collectors.
Conclusion
The 1967 Chevrolet Chevy II remains an emblematic piece of automotive history—a compact powerhouse that delivered on both performance and practicality. It stands as a reminder of an era when cars were both a statement and an experience—a machine that continues to captivate enthusiasts around the world.
1967 Chevrolet Chevy Ii Catalog of Parts
1967 Chevrolet Chevy II Door Lock Pillar Seal. Made with full steel cores-ALP 5009Door Lock Pillar Seal. Made with full steel cores. Pair R&L
1967 Chevrolet Chevy II Accelerator Pedal Pad with flange-AP 31-AAccelerator Pedal Pad with flange, made of rubber with steel core. Also
1967 Chevrolet Chevy II Accelerator Pedal Pad without flange-AP 31-BAccelerator Pedal Pad without flange, made of rubber with steel core. Also
1967 Chevrolet Chevy II Bumper to Body Seal. 1-3/16" wide X 5' long. Each-BG 109-NBumper to Body Seal. 1-3/16" wide X 5' long. Each
1967 Chevrolet Chevy II Shock Absorber Grommet. 1" bottom O.D., 3/4" high-BN 1Shock Absorber Grommet. 1" bottom O.D., 3/4" high., with 7/16" I.D. Each
1967 Chevrolet Chevy II Front coil-spring insulator-BN 110Front coil-spring insulator. Fits '41-'60 Oldsmobile and '50-'83 GM passenger models. 5-3/8 in. OD x 3-3/4 in. ID x 3/4 in. high with 13/16 in. wide bottom flange 1/4" thick, 12 flutes. Each.
1967 Chevrolet Chevy II Front Stabilizer End Repair Kit-BNK 23Front Stabilizer End Repair Kit. 22-piece set for two stabilizer bars. Contains all rubber bushings, washers, bolts and nuts, enough for one front end. Set
1967 Chevrolet Chevy II Butyl Glass Setting Tape-BT 1Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16" wide X 15' long. Each
1967 Chevrolet Chevy II Clutch and Brake Pedal Pads. 2-5/8" wide X 3-5/8" long-CB 101Clutch and Brake Pedal Pads. 2-5/8" wide X 3-5/8" long. Pair
1967 Chevrolet Chevy II Brake Pedal Pad-CB 101-ABrake Pedal Pad. For power brakes or automatic transmissions. 4-3/4" wide X 2-3/4' long. Each
1967 Chevrolet Chevy II Power Brake Pedal Pad. For cars with manual transmission-CB 101-CPower Brake Pedal Pad. For cars with manual transmission. Nice reproduction. 3-5/8" wide X 2-5/8" long. Each
1967 Chevrolet Chevy II Clutch and Brake Pedal Pads. Exact reproduction-CB 80Clutch and Brake Pedal Pads. Exact reproduction. 3-3/8" wide X 2-3/8" long. Pair
1967 Chevrolet Chevy II Park Brake Pedal Pad. 2-9/16" wide. Each-CB 99-APark Brake Pedal Pad. 2-9/16" wide. Each
1967 Chevrolet Chevy II Auto Brake Pedal Pad. 5-7/8" wide. Each-CB 99-BAuto Brake Pedal Pad. 5-7/8" wide. Each
1967 Chevrolet Chevy II Hood Side Bumper. Each-HF 38Hood Side Bumper. Each
1967 Chevrolet Chevy II Trip Meter Reset Knob. Made of black rubber-KN 10Trip Meter Reset Knob. Made of black rubber. Compare to measurements: 1/8" I.D., 7/16" O.D. X 1/2" tall. Each
1967 Chevrolet Chevy II Molded Door Seals, with Clips. For 2-door sedan. Pair R&L-LM 20-KMolded Door Seals, with Clips. For 2-door sedan. Pair R&L
1967 Chevrolet Chevy II Molded Front Door Seals, with Clips. For 4-door sedan and wagon-LM 20-LMolded Front Door Seals, with Clips. For 4-door sedan and wagon. Pair R&L
1967 Chevrolet Chevy II Rear Molded Door Seals, with Clips. For 4-door sedan-LM 20-L/RRear Molded Door Seals, with Clips. For 4-door sedan. Pair R&L
1967 Chevrolet Chevy II Rear Molded Door Seals, with Clips. For 4-door wagon-LM 20-L/WRear Molded Door Seals, with Clips. For 4-door wagon. Pair R&L
1967 Chevrolet Chevy II Door Seals, with Clips and Molded Ends-LM 20-NDoor Seals, with Clips and Molded Ends. For 2-Door Hardtops and Convertibles. Pair R&L
1967 Chevrolet Chevy II Rear Bumper to Body Gravel Guard. 1-3/4" wide-LP 109-N/FTRear Bumper to Body Gravel Guard. 1-3/4" wide. Sold by the foot
1967 Chevrolet Chevy II Tail-Light Gasket-MB 40Tail-Light Gasket. Thick, molded soft rubber seal (do not confuse with Lens Gasket). Replaces OEM #7587759. Pair
1967 Chevrolet Chevy II Front Antenna Mount Pad. For 2-door sedan and station wagon-MP 546-JFront Antenna Mount Pad. For 2-door sedan and station wagon. Made with hug lip. Perfect reproduction. 1-5/8" I.D., 1-3/4" O.D. Each
1967 Chevrolet Chevy II Mirror pad. For mirrors with remote control. 1-1/4 in-MP 547-HMirror pad. For mirrors with remote control. 1-1/4 in. W x 5-1/2 in. L. Each.
1967 Chevrolet Chevy II Remote Mirror Gasket. Each-MP 547-QRemote Mirror Gasket. Each
1967 Chevrolet Chevy II Door Handle Pads. 2-5/8" long & 1-1/8" long. Set R&L-MP 989-DDoor Handle Pads. 2-5/8" long & 1-1/8" long. Set R&L
1967 Chevrolet Chevy II Basic Kit, for 2-Door Sedan-RKB 2002-102Basic Kit, for 2-Door Sedan. Door (LM 20-K) Trunk (TK 46-16), Seals.
1967 Chevrolet Chevy II Basic Kit, for 2-Door Hardtop-RKB 2002-104Basic Kit, for 2-Door Hardtop. Door (LM 20-N) Roof Rail (RR 5011) Trunk (TK 46-16), Seals.
1967 Chevrolet Chevy II Brake Master Cylinder Cover Seal. Replaces OEM #5470861-RP 2-EBrake Master Cylinder Cover Seal. Replaces OEM #5470861. 5" X 2-1/2". Each
1967 Chevrolet Chevy II Sun Visor Support Sleeve. Clear plastic. Each-RP 303-ASun Visor Support Sleeve. Clear plastic. Each
1967 Chevrolet Chevy II Sun Visor Rod Rubber Grommet. 3/4" long. Gray. Each-RP 303-CSun Visor Rod Rubber Grommet. 3/4" long. Gray. Each
1967 Chevrolet Chevy II Clutch Arm Fork Boot. Fits on bell housing to keep dirt out-RP 31-DClutch Arm Fork Boot. Fits on bell housing to keep dirt out. Each
1967 Chevrolet Chevy II Carpet Trim Ring. 5-1/8" X 6-3/4" O.D. Each-RP 34-XCarpet Trim Ring. 5-1/8" X 6-3/4" O.D. Each
1967 Chevrolet Chevy II Positive Crankcase Ventilation Grommet-RP 9Positive Crankcase Ventilation Grommet. 11/16" wide X 1-5/8" long, with 15/16" I.D. (Fits some models) Each
1967 Chevrolet Chevy II Molded Roof Rail Seals, for 2-Door Hardtop. Pair R&L-RR 5011Molded Roof Rail Seals, for 2-Door Hardtop. Pair R&L
1967 Chevrolet Chevy II Trunk Bumper. Fits lower corner on decklid. 15/16" O.D-SB 34Trunk Bumper. Fits lower corner on decklid. 15/16" O.D., 11/16" high. Each
1967 Chevrolet Chevy II Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35Door Bumper, 57-74 GM Cars, made with twin retainers, Each. Measure 1-1/16" high X 19/32" wide X 1-1/32" long.
1967 Chevrolet Chevy II Seat Bumper. Made with steel core like original-SB 62-ASeat Bumper. Made with steel core like original. 1-1/2" long, 7/16" thick. Two used per car. Each
1967 Chevrolet Chevy II Clutch Pedal Return Bumper-SB 64Clutch Pedal Return Bumper. 1-13/16" long X 13/16" wide X 7/8" high (center). Each
1967 Chevrolet Chevy II License Plate Bumper. Fits a 1/4" hole. Each-SB 75License Plate Bumper. Fits a 1/4" hole. Each
1967 Chevrolet Chevy II Glove Box and Fuel Door Bumper. Fits 3/16" hole. Each-SB 78Glove Box and Fuel Door Bumper. Fits 3/16" hole. Each
1967 Chevrolet Chevy II Fuel Door Bumper. 7/8" high, 5/16" O.D. Each-SB 81Fuel Door Bumper. 7/8" high, 5/16" O.D. Each
1967 Chevrolet Chevy II License Plate Bumper. Fits a 1/4" hole. Each-SB 82License Plate Bumper. Fits a 1/4" hole. Each
1967 Chevrolet Chevy II Dash and Firewall Grommet. Single-hole type is for one wire-SM 101Dash and Firewall Grommet. Single-hole type is for one wire. Each
1967 Chevrolet Chevy II Dash and Firewall Grommet. Two hole type. Each-SM 101-ADash and Firewall Grommet. Two hole type. Each
1967 Chevrolet Chevy II Timing Hole Plug. For 6-cylinder engines. 1-3/4" X 1-1/4"-SM 59Timing Hole Plug. For 6-cylinder engines. 1-3/4" X 1-1/4". Each
1967 Chevrolet Chevy II Rocker Arm Cover. Neoprene plug. Fits 1" hole. Each-SM 66Rocker Arm Cover. Neoprene plug. Fits 1" hole. Each
1967 Chevrolet Chevy II Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-AFirewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L. Replaces OEM#'s (GM) 7642589 and (AMC) 4001934. Black. Each.
1967 Chevrolet Chevy II Station Wagon Tailgate Seal. Each-TG 12Station Wagon Tailgate Seal. Each
1967 Chevrolet Chevy II Trunk Seal. 16 feet long. Each-TK 46-16Trunk Seal. 16 feet long. Each
1967 Chevrolet Chevy II Trunk Mat-TM 2019-ATrunk Mat. High quality reproduction, made specific for vehicle. Aqua houndstooth print on rubber, like original. Each
1967 Chevrolet Chevy II Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D-UM 1600-100Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D. Each
1967 Chevrolet Chevy II Unbeaded Door Handle Mounting Pads. 4-Piece Set-UM 2005-100Unbeaded Door Handle Mounting Pads. 4-Piece Set
1967 Chevrolet Chevy II Vulcanized rear quarter-window seals. Fits Nova wagons only-VQT 4000Vulcanized rear quarter-window seals. Fits Nova wagons only. 2-3/4 x 16-1/4 x 9-3/4 x 14-1/4 in. outside dimensions. Pair. R&L.
1967 Chevrolet Chevy II Rear side window seals. Fits Nova wagons only. Pair. R&L.-VQT 5000Rear side window seals. Fits Nova wagons only. Pair. R&L.
1967 Chevrolet Chevy II Vent Window Bumpers. For 2-door hardtop. 1-3/8" Long-VR 6600Vent Window Bumpers. For 2-door hardtop. 1-3/8" Long. Pair
1967 Chevrolet Chevy II Rear Side Roll-Up Window Seal, for Hardtops and Convertibles-VS 3Rear Side Roll-Up Window Seal, for Hardtops and Convertibles. Two 20" sections slide into metal track. No steel insert. Pair
1967 Chevrolet Chevy II Rear Roll-Up Quarter Window Seals, for 2-Door Hardtop-VS 3-XRear Roll-Up Quarter Window Seals, for 2-Door Hardtop. Made with steel cores. 13-5/8" Long. Pair
1967 Chevrolet Chevy II Vulcanized windshield seal-VWS 0621Vulcanized windshield seal. For 2-door and 4-door sedans and wagons. One-piece vulcanized seal accepts chrome trim. 150 in. length. Each.
1967 Chevrolet Chevy II Vulcanized windshield seal. For 2-door hardtops-VWS 0622Vulcanized windshield seal. For '62-'67 Chevy Nova 2-door hardtops. One-piece vulcanized seal accepts chrome trim. Each.
1967 Chevrolet Chevy II Flocked Window Channel. 48" Piece. Each-WC 22-48Flocked Window Channel. 48" Piece. Each
1967 Chevrolet Chevy II Flocked Window Channel. 96" Piece. Each-WC 22-96Flocked Window Channel. 96" Piece. Each
1967 Chevrolet Chevy II Window sweeper kit. 2-door hardtop. OEM replacement-WC 3003-14Window sweeper kit. 2-door hardtop. OEM replacement. 8-piece kit.
1967 Chevrolet Chevy II Window sweeper kit. 2-door sedan. OEM replacement-WC 3003-15Window sweeper kit. 2-door sedan. OEM replacement. 8-piece kit.
1967 Chevrolet Chevy II Window sweeper kit. 4-door sedan. OEM replacement-WC 3003-16Window sweeper kit. 4-door sedan. OEM replacement. 8-piece kit.
1967 Chevrolet Chevy II Window sweeper kit. Station wagon only. Rear tailgate window-WC 3003-17Window sweeper kit. Station wagon only. Rear tailgate window. OEM replacement. 2-piece set, inner and outer.
1967 Chevrolet Chevy II Rigid division-bar channel. Unbeaded. 96 in. long. Each-WC 41-96Rigid division-bar channel. Unbeaded. 96 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned in two or three equal lengths to reduce overseas shipping costs.
1967 Chevrolet Chevy II Quarter Window Reveal Molding Clip. Made of Steel-WF 205Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8" X 11/16". Each
1967 Chevrolet Chevy II Rear Window Reveal Molding Clip. For Station Wagons-WF 208Rear Window Reveal Molding Clip. For Station Wagons. Made of steel. 5/8" x 3/4". Each
1967 Chevrolet Chevy II Front Vent Window Seals. For 2-door hardtop and convertible-WR 2020Front Vent Window Seals. For 2-door hardtop and convertible. Pair R&L
1967 Chevrolet Chevy II Front Vent Window Seals-WR 2021Front Vent Window Seals. For 2-door & 4-door sedan or station wagon. Pair R&L
1967 Chevrolet Chevy II Front Suspension Bumper. For steering knuckle support-XB 20Front Suspension Bumper. For steering knuckle support. 1-3/8" high. EachWhy Choose Metro?
For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.
- Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
- Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
- SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
- Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
- Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.
Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.