null
×
close

Detail Items

Products to detail or restore the interior of your car.

Detail Items
Seals

High quality seals to keep water and dirt out

Seals
Engine & Suspension

Engine, hood, and frame parts

Engine & Suspension
Hardware

Bumpers, grommets, fasteners and other hard to find items

Hardware
sidebar:
  • RR 110-O

    Roof Rail Seals, for 4-Door Hardtop. Pair-RR 110-O

    $141.99

    Designed for 4-door hardtop models, these roof rail seals are crafted to fit perfectly and provide a secure seal for your classic car. Specifically made for 1959-1960 Buick Electra, Cadillac Eldorado, Cadillac Series 60 Fleetwood, and Oldsmobile 98...

  • RR 101-K

    Roof Rail Seals, for 2-Door Hardtop. 84" Long. Pair-RR 101-K

    $192.99

    For 2-door hardtop models, these roof rail seals are 84" long and come as a pair, designed to provide a perfect fit and exceptional sealing for your classic car. Specifically crafted for 1964-1968 American Motors American cars and 1969 American Motors...

  • RP 73

    Torque Arm Ball Rubbers. Pair-RP 73

    $174.99

    Designed for classic Packard cars, these torque arm ball rubbers are a perfect fit for 1935-1941 Packard models, including the EIGHT, Model 120-A, Super Eight, TWELVE, ONE-TEN, ONE-TWENTY, and SUPER-8 ONE-SIXTY and ONE-EIGHTY. Crafted with over 50 tons...

  • RP 72-C

    Front lower rubber insulating cushion-RP 72-C

    $176.49

    Designed for classic Packard cars, this front lower rubber insulating cushion measures 2-7/16 inches wide by 3-3/8 inches long, with a 1-13/16-inch long center hole, and replaces OEM# 300227. It is crafted to support the motor at the timing-gear cover,...

  • RP 33-R

    Shift Boot. Each-RP 33-R

    $145.49

    Designed for classic Buick cars, this shift boot fits 1965-1972 Buick Gran Sport, GS, GS 350, GS 400, GS 455, and Skylark models. Crafted with precision using over 50 tons of pressure, it ensures perfect definition and detailing for a snug fit and clean...

  • RP 32-A

    Drive Master Electric Shift Vacuum Diaphragm-RP 32-A

    $186.99

    For classic Hudson cars and pickup trucks from 1936 to 1954, this Drive Master Electric Shift Vacuum Diaphragm is designed specifically for models equipped with the Drive Master system and standard transmission. This pair of diaphragms is crafted with...

  • RP 300-H

    Inlet Box Bellows. Fresh air duct to heater-RP 300-H

    $156.99

    This inlet box bellows is designed for 1960-1964 Ford cars and 1962-1964 Ford Club Wagon vans, measuring 7" wide by 9-1/4" long. It connects the fresh air duct to the heater, ensuring proper airflow and functionality. Made from durable PVC with a lower...

  • RM 23-Q

    Molded Heel Pad. For drivers side. Correct rib pattern-RM 23-Q

    $139.99

    Designed for the 1934-1937 Chrysler Airflow and Imperial Airflow models, this molded heel pad is a perfect fit for the driver’s side and measures 11-1/2" x 15". Crafted in a rich brown color with a correct rib pattern, it enhances the interior’s classic...

  • RKB 2011-103

    Basic Kit, for 2-Door Sedan-RKB 2011-103

    $193.49

    Designed for 2-door sedans, this Basic Kit includes high-quality door and trunk seals (LM 21-E and TK 46-18) to ensure a snug, weatherproof fit for your classic car. Tailored specifically for 1967-1968 Chevrolet Bel Air and Biscayne models, these seals...

  • RA 3

    Radiator Seal, for top of radiator-RA 3

    $152.99

    For the 1949 Mercury Mercury Car, this radiator seal kit is designed to fit perfectly at the top of the radiator, snapping securely into the sheet metal shrouds. This 3-piece kit includes molded ends and a center section, with the middle section...

  • MP 993-G

    Tail-light Pads. 3-1/2" wide X 7-3/8" long. Pair-MP 993-G

    $196.79

    For the 1935-1936 Reo Flying Cloud car, these tail-light pads measure 3-1/2" wide by 7-3/8" long and are designed to provide a perfect fit. Crafted to prevent rattling and squeaking, they ensure a quieter ride while protecting your car's paint from...

  • MP 993-A

    Tail-light Pads. 2-3/4" wide X 4-3/4" long. Pair-MP 993-A

    $148.49

    For the 1931-1932 Reo Flying Cloud and Reo Royale cars, these tail-light pads measure 2-3/4" wide by 4-3/4" long and are designed to protect your vehicle while enhancing its classic appeal. Crafted to prevent rattling and squeaking, these pads ensure a...

  • MP 990

    Park Light Pads. 2-3/4" wide X 8-3/8" long. Pair-MP 990

    $164.99

    For classic 1931-1932 Studebaker cars, including the Commander, Dictator, President, Six, and Rockne models, these park light pads are a perfect fit. Measuring 2-3/4" wide by 8-3/8" long, they are designed to prevent rattling and squeaking while...

  • MP 981

    Tail-light Pads. 4-7/8" wide X 7-1/4" long. Pair-MP 981

    $162.99

    For 1933 Studebaker Commander Model 73, President Speedway Model 92, Rockne Model 10, and Six Model 56 cars, these tail-light pads measure 4-7/8" wide by 7-1/4" long and are designed to fit perfectly between your tail-light housing and the car body...

  • MP 980

    Park Light Pads. 3-1/4" wide X 8-1/2" long. Pair-MP 980

    $149.99

    Designed for 1931-1932 Studebaker cars, including Commander, Dictator, President, Six, and Rockne models, these park light pads measure 3-1/4" wide by 8-1/2" long and are sold as a pair. Crafted to prevent rattling and squeaking, they ensure a quieter...

  • MP 971-F

    Headlight Pads. 3-1/2" wide X 8-3/4" long. Pair R&L-MP 971-F

    $176.99

    For the 1931 Studebaker Commander Model 70 car, these headlight pads measure 3-1/2" wide by 8-3/4" long and are designed to fit perfectly under your headlights. Crafted to prevent rattling and squeaking, they ensure a quieter ride while protecting your...

  • MP 971-E

    Headlight Pads. 3-5/8" wide X 8-3/8" long. Pair R&L-MP 971-E

    $176.99

    For the 1931 Studebaker President Model 80 car, these headlight pads measure 3-5/8" wide by 8-3/8" long and are designed to fit perfectly, providing essential protection and durability. Crafted to prevent your hardware from rattling and squeaking, these...

  • MP 971

    Tail-light Pads. 2-5/8" wide X 8-1/16" long. Pair-MP 971

    $176.99

    For the 1937 Studebaker Dictator and President cars, these tail-light pads measure 2-5/8" wide by 8-1/16" long and are designed to provide a perfect fit. Crafted to prevent rattling and squeaking, they ensure a quieter ride while protecting your car's...

  • MP 968

    Headlight Pads. 3-3/4" wide X 8-1/2" long. Pair-MP 968

    $176.99

    For the 1937 Studebaker Dictator and President cars, these headlight pads measure 3-3/4" wide by 8-1/2" long and are designed to protect your vehicle's paint from scratches and rust while preventing hardware from rattling and squeaking. Crafted with...

  • MP 966

    Tail-light Pads. 2-3/8" wide X 9-1/4" long. Pair-MP 966

    $164.99

    For 1941 Studebaker Champion, Commander, and President cars, these tail-light pads measure 2-3/8" wide by 9-1/4" long and are designed to fit perfectly between the tail-light housing and the car body. Crafted by Metro Moulded Parts, they prevent rattling...

  • MP 963-B

    Headlight Pads. 4-1/4" wide X 5-3/4" long. Pair-MP 963-B

    $148.49

    For the 1935 Studebaker President car, these headlight pads measure 4-1/4" wide by 5-3/4" long and are designed to provide a perfect fit. Crafted to prevent your headlight hardware from rattling and squeaking, these pads also protect your car’s paint...

  • MP 963-A

    Headlight Pads. 5" wide X 7-3/4" long. Pair-MP 963-A

    $176.99

    For the 1936 Studebaker Dictator and President cars, these headlight pads measure 5 inches wide by 7-3/4 inches long and are sold as a pair. Designed to fit snugly between your headlights and the body of your car, these pads prevent annoying rattling and...

  • MP 963

    Headlight Pads. 4-1/4" wide X 5-5/8" long. Pair-MP 963

    $135.99

    For the 1935 Studebaker Commander, Dictator, and President cars, these headlight pads measure 4-1/4" wide by 5-5/8" long and are designed to protect your vehicle's paint from scratches and rust while preventing hardware from rattling and squeaking...

  • MP 960-A

    Headlight Pads. 3-1/2" wide X 4" long. Pair R&L-MP 960-A

    $149.99

    For the 1933 Studebaker Rockne Model 10 car, these headlight pads measure 3-1/2" wide by 4" long and are designed to protect your vehicle while enhancing its durability. Crafted to prevent rattling and squeaking, these pads ensure a quieter ride by...

  • MP 931

    Trunk Hinge Pads. 1-1/2" wide X 11-1/8" long. Set-MP 931

    $186.79

    Designed for classic Packard cars, these trunk hinge pads are a perfect fit for 1935-1938 Packard EIGHT, Model 120-A/B, Super Eight, TWELVE, ONE TWENTY, and SIX models. Measuring 1-1/2" wide by 11-1/8" long, this set is crafted to prevent rattling and...

  • MP 921

    Tail-light Pads. 3-3/8" wide X 9-3/8 long. Pair R&L-MP 921

    $189.99

    For the 1941-1942 Packard Super-8 One-Sixty and One-Eighty cars, these tail-light pads measure 3-3/8" wide by 9-3/8" long and are designed to fit perfectly between your tail-light assembly and the car body. Crafted to prevent rattling and squeaking, they...

Why Buy From Metro Moulded Parts

  • Metro parts are made with a proprietary closed micro-cell technology. All parts have very smooth skin that is free of exposed cells or flaws. Furthermore, you can be confident that your parts will continue to retain a uniform size, provide even compression, and retain superior memory. Other brands are coated with an outer latex skin that will bruise, gall, blister, glaze, crack, and peel.

  • We use the latest advancements in CAD and CNC milling for proper 3D contouring, assuring a perfect fit and OEM quality appearance. Our molds are milled from single metal blocks to tolerances of 0.001 in. to minimize flash lines in finished parts. Mold cavities are polished regularly to product parts with high luster and smooth contours.

  • Metro parts are made locally in the USA.

  • All Metro parts are guaranteed for a full 15 years. Each part comes with a certificate of guarantee. We promise that if your Metro made part fails at any time during that time they'll replace it free of charge. That's their "No Hassle" guarantee. Don't settle for a simple promise of satisfaction. Metro's warranty is the best you can get! Bar none!

  • Metro parts are 30% softer and more durable than other brands. Simply the softest reproduction in the market.

  • In addition, Metro parts provides extraordinary resistance to hardening and decay caused by exposure to ozone and UV light.

  • None of Metro's parts use accelerants or cheap fillers in the molding processes, which can cause the part to prematurely age and fail.

Customer Reviews

Need expert help? We're available at1-800-878-2237 - Email us athelp@metrommp.com orGet Help