For 1963-1966 Dodge Dart, Plymouth Valiant, and Plymouth Barracuda cars, this hood side bumper is designed to ensure proper hood alignment, minimizing the risk of paint chipping and maintaining your car's pristine look. Crafted with precision and...

For classic car enthusiasts, this hood side bumper is designed specifically for 1967-1970 Dodge Dart, Plymouth Barracuda, Plymouth Valiant, and 1970 Plymouth Duster cars. Crafted with precision by Metro Moulded Parts, this durable rubber component...

For 1971-1974 Dodge Dart, Plymouth Duster, Scamp, and Valiant cars, this Metro Moulded Parts hood bumper is a must-have for maintaining your vehicle's pristine look. Designed with precision, this durable rubber bumper ensures your hood aligns perfectly,...

Designed for classic cars like the 1966-1967 Dodge Charger, Coronet, Plymouth Belvedere, Satellite, and GTX, this hood side bumper measures 1.094" wide x 0.987" tall x 1.00" deep. It ensures proper hood alignment, reducing the risk of paint chipping and...

For classic car enthusiasts, this hood side bumper is designed for 1967 Plymouth GTX, 1968-1971 Dodge Charger, 1968-1971 Dodge Coronet, 1968-1971 Plymouth Belvedere, 1968-1971 Plymouth GTX, 1968-1971 Plymouth Road Runner, 1968-1971 Plymouth Satellite,...

Designed for the 1967 Jaguar 420 car, this rear hood side bumper is a precision-crafted part that ensures your hood aligns perfectly, reducing the risk of paint chipping and keeping your classic car looking its best. Made by Metro Moulded Parts, this...

Designed for 1965-1970 Cadillac Calais, DeVille, Eldorado, and Fleetwood cars, this hood-to-fender bumper is a precision-crafted part that ensures your hood aligns perfectly with the fender, reducing the risk of paint chipping and maintaining the sleek...

For 1955-1958 Buick Century, Roadmaster, Special, Super, and Limited cars, this hood-to-fender bumper is designed to ensure proper hood alignment while protecting your paint from chips and scratches. Crafted with precision and attention to detail, this...

This hood bumper is designed for 1957-1959 Ford, Lincoln, and Mercury vehicles, including cars like the Thunderbird, Fairlane, and Ranchero, as well as trucks like the Courier Sedan Delivery. Crafted with precision by Metro Moulded Parts, this durable...

Designed for vehicles with a lift-up hood, these hood corners are 2-3/4" wide and fit square corners with a 1/4" to 3/8" rolled bead. Crafted to protect your hood and fenders, they provide a clean, finished look while shielding these areas from wear and...

This door, hood, and trunk bumper cap, designed for adjustment bolts, is a perfect fit for classic cars like the 1938 Cadillac Series 60 and 1957 Chevrolet Bel Air, among many others. Measuring 7/8" in diameter and 7/16" thick, it ensures precise...

This hood adjustment bolt and bumper, designed for cars and trucks from 1964 to 1966, features a 1-1/8" diameter rubber head and a 5/16" thick bolt with 18 threads per inch, measuring 2-1/8" in length. Crafted by Metro Moulded Parts, this component...

For classic Packard cars, this gas filler grommet is designed to fit models from 1920 to 1955, including the Twin Six, Single Eight, Single Six, and more. With precise measurements of 2-1/2" I.D. and 4-1/8" O.D., it ensures a snug and secure fit for your...

Designed for classic Volkswagen models, these gravel shields are a perfect fit for 1946-1979 Volkswagen Beetle cars, Transporter vans, Karmann Ghia cars, and more. Measuring 7-5/8" long by 5-5/8" wide at the top, these shields are molded flat without...

This tank hose, designed for fuel tank to filler pipe connections, measures 2-1/4" in inside diameter and is 6" long, making it a perfect fit for most vehicles using this setup. Crafted from high-grade neoprene and reinforced with wire, this hose ensures...

This tank hose, designed for fuel tank to filler pipe connections, measures 2-1/8" I.D. and is 6" long, making it a perfect fit for most vehicles using this setup. Crafted from high-grade neoprene and reinforced with wire, this hose ensures durability...

This tank hose is designed for vehicles with a fuel tank-to-filler pipe setup, measuring 2 inches in inside diameter and 6 inches in length. Made from high-grade neoprene and reinforced with wire, it ensures durability and flexibility for a secure and...

This fuel line hose, with a 5/16" inner diameter and 9/16" outer diameter, is designed for durability and reliability in fuel systems. Made with a high-grade neoprene exterior and a chemical-resistant interior, it ensures long-lasting performance even in...

This fuel line hose, with a 1/4" inner diameter and 1/2" outer diameter, is designed for durability and reliability in fuel systems. Made for chemical resistance, it features a high-grade neoprene exterior that protects against wear and tear, while the...

Designed for classic cars, these auxiliary door seals are a perfect fit for 1941-1942 Buick, Cadillac, Chevrolet, and Pontiac models, as well as 1946-1948 Chevrolet, Oldsmobile, and Pontiac vehicles. Measuring 5-1/2 inches by 4 inches, this pair of seals...

For 1941-1948 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, these auxiliary door seals are designed for the lower front corner of the front doors, ensuring a snug and weatherproof fit. Crafted by SUPERsoft, these seals are 30% softer and more...

For 1939 Buick Century Series 60, Buick Special 40, Cadillac Series 60 Special, Cadillac Series 61, Oldsmobile Series 70, Oldsmobile Series 80, Pontiac Deluxe Eight, and Pontiac Deluxe Six cars, these inner and outer center division bar seals are...

For 1939 Chevrolet Master 85, Oldsmobile Series 60, and Pontiac Quality Six cars, these inner and outer center division bar seals are precision-crafted to fit perfectly. Each seal measures 12-7/8" in length and comes with pre-drilled holes for easy...

This door and hood bumper, measuring 1/2" high x 13/16" wide x 1" long, is designed to fit seamlessly into your vehicle, providing essential cushioning and protection for your doors and hood. Made by Metro Moulded Parts, this durable and long-lasting...

For convertible models, these windshield pillar post seals measure 17-1/2" long and come as a two-piece pair, designed to fit seamlessly into your classic 1949-1951 Lincoln or Mercury, including the 9EL Series, Cosmopolitan, Monterey, and Mercury models...

This cowl seal is designed for vehicles requiring a precise fit and measures perfectly to ensure a snug installation along the cowl area, protecting against water, dirt, and debris. Crafted in jet black for a refined concours look, it avoids the dull ash...

This split wire loom is designed for versatile use in organizing wires and small tubes, measuring 11/16" I.D. and 10 feet in length. Made from durable black nylon, it offers excellent chemical and UV resistance, ensuring long-lasting performance even in...

This split wire loom is designed for universal use and measures 3/8" I.D. x 10' long, making it perfect for organizing and protecting wires or small tubes in various applications. Crafted from durable black nylon, it offers excellent chemical and UV...

This split wire loom, designed for various vehicle applications, measures 1/4" I.D. and is 10 feet long, making it ideal for grouping wires and small tubes neatly and securely. Made from durable black nylon, it offers excellent chemical and UV...

This channel liner is designed for convertible body styles and measures 1-1/2" wide by 19" long, making it a perfect fit for relining permanent guide bars on certain convertible models. Made from durable black mohair lining material with a rubberized...