This master cylinder rod dust boot is designed for classic cars, including 1936-1963 Chevrolet, Pontiac, Cadillac, and Oldsmobile models, ensuring a precise fit and reliable performance. Crafted from advanced rubber compounds, it resists chemicals,...

This distributor ignition boot is designed for classic cars, including the 1932-1941 Ford, Lincoln, and Mercury models, with precise measurements of 3-1/8" length, 1-1/4" outer diameter, and 3/4" inner diameter. Crafted from advanced rubber compounds, it...

For classic 1949-1950 Lincoln and Mercury cars, including the 9EL Series, Cosmopolitan, Mercury, and Monterey models, these front park light boots are a perfect fit. Designed with precision, they are crafted from state-of-the-art rubber compounds that...

For 1942-1948 Chevrolet Fleetline, Fleetmaster, Special Deluxe, and Stylemaster Series cars, this park light boot is designed to protect the pigtail connector with precision and durability. Made from state-of-the-art rubber compounds, it resists...

This radio fuse boot and wire harness is designed for 1941-1948 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, as well as Chevrolet trucks from the same years. Specifically crafted for original radios, this part ensures a snug and secure fit,...

For 1941 Chevrolet Fleetmaster and Special Deluxe cars, this park brake cable boot measures 2-7/8" long and is designed to protect your brake cable from wear and tear. Crafted with state-of-the-art rubber compounds, it resists chemicals, sunlight, and...

For classic car enthusiasts, this quarter panel drain valve is designed for the 1964 Ford Galaxie and 1964-1966 Ford Mustang models, replacing OEM #C4MZ62103. Crafted with state-of-the-art rubber compounds, it is resistant to chemicals, sunlight, and...

This door and tailgate bottom drain seal, measuring 3 inches long, is designed for 1963-1964 Ford and Mercury vehicles, including cars, vans, and trucks like the Ford Galaxie, Thunderbird, and Mercury Comet. Replacing OEM #C3AZ6220700B, this seal is...

For classic Ford cars and vans, this rocker panel drain plug valve is a must-have for maintaining your vehicle's integrity. Designed for models like the 1961-1967 Ford Fairlane, Falcon, Galaxie, Thunderbird, and Club Wagon, this part is crafted with...

This firewall grommet is designed for convertibles and fits a 7/8" hole with a 3/4" center hole, making it a perfect fit for the top of the vacuum hose. Crafted by Metro Moulded Parts, it is made with advanced rubber compounds that resist chemicals,...

This choke cable grommet is designed for classic cars, fitting a 5/8" hole with a 1/8" center hole, making it a perfect match for 1940-1948 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models, as well as 1946-1948 vehicles from the same brands...

This hood cable grommet is designed for 1940-1941 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, fitting a 7/16" to 1/2" hole with a 3/16" center hole. Crafted from state-of-the-art rubber compounds, it resists chemicals, sunlight, and ozone,...

Designed for 1940-1948 Chevrolet cars, including Master 85, Special Deluxe, Fleetmaster, Fleetline, and Stylemaster models, this firewall grommet measures 1-5/8" in outer diameter and is specifically crafted for the temperature gauge. Made by Metro...

Designed for classic cars, this windshield wiper pivot grommet is a perfect fit for 1946-1952 Cadillac and Chevrolet models, including the Cadillac Series 6, Series 60 Special Fleetwood, Series 62, Series 75 Fleetwood, and Chevrolet Fleetline,...

For the 1954-1962 Metropolitan Series A, B, and 560 III/IV cars, this door end plug is a must-have for maintaining your classic vehicle's integrity. Designed to fit snugly into the door ends, this plug is crafted from state-of-the-art rubber compounds,...

This timing hole plug is designed for 6-cylinder engines and measures 1-3/4" x 1-1/4", making it a perfect fit for your classic Chevrolet. Crafted by Metro Moulded Parts, it is built with state-of-the-art rubber compounds that resist chemicals, sunlight,...

For classic car enthusiasts, this trunk wire harness grommet is designed for 1953-1955 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, fitting a 7/8" hole with a flexible 3/16" center hole. Crafted from state-of-the-art rubber compounds, it...

This headlight wire grommet is designed for classic car models, including the 1952-1957 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars. It fits a 7/8" hole with a 7/16" center hole, ensuring a snug and secure fit for your wiring needs. Made...

Designed for classic car enthusiasts, this manual wiper pump firewall grommet is a perfect fit for 1967-1974 Dodge Dart, Plymouth Barracuda, Valiant, Cuda, and Duster models. Measuring 1-3/4" in outer diameter and fitting a 1-1/2" hole, this grommet...

This windshield wiper grommet, designed for classic cars with a 1" hole, is a perfect fit for 1940-1948 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models, as well as 1953-1955 Chevrolet Corvettes. Crafted from advanced rubber compounds, it...

This headliner bow grommet is designed for 1948-1954 Hudson cars, including the Commodore Series, Super 6, Super 8, Pacemaker, Hornet, Wasp, Jet, Jetliner, and Super Jet models. Crafted with state-of-the-art rubber compounds, it is resistant to...

For the 1968-1976 Chevrolet Corvette, this hood release cable grommet is designed to fit a 1-1/8" hole at the firewall, ensuring a snug and secure fit. Crafted by Metro Moulded Parts, it is made with advanced rubber compounds that resist chemicals,...

This firewall grommet is designed for 1953-1954 Chevrolet Bel Air, Corvette, One-Fifty Series, and Two-Ten Series cars, fitting a 7/8" hole with a 1-3/16" outer diameter and a 9/16" inner diameter. Crafted to secure headlight and park light harnesses, it...

This hole plug and cowl bumper is designed for classic cars, fitting a 1/2" hole, and is perfect for 1949-1958 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models, including iconic vehicles like the 1953 Cadillac Eldorado and 1957 Chevrolet Bel...

Designed for 1951-1956 Buick Roadmaster, Special, Super, Century, and Skylark cars, this firewall grommet for vacuum line hoses measures 2-11/16" long, 1-5/8" wide, and 1-3/16" thick. Crafted by Metro Moulded Parts, it is made with advanced rubber...

This heater control valve gasket is designed for classic cars, including the 1954-1957 Buick Century, Roadmaster, Special, and Super; Cadillac DeVille, Eldorado, Series 60 Fleetwood, Series 62, and Series 75 Fleetwood; Oldsmobile 88, 98, Starfire,...

Designed for the 1954-1962 Metropolitan Series A, B, and 560 III/IV cars, this pivot grommet measures 3/4" high with a 3/16" inner diameter, ensuring a precise fit for your classic vehicle. Crafted by Metro Moulded Parts, it is made from advanced rubber...

This floor panel wire grommet, designed for classic car models like the 1963-1974 Dodge and Plymouth cars, fits a 3/4" hole and is crafted to protect wiring as it passes through the floor panel. Made from state-of-the-art rubber compounds, it is...

This speedometer cable firewall grommet is designed for 1939-1948 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, fitting a 1-7/8" long hole. It is not compatible with vehicles originally equipped with factory windshield washers. Crafted from...

Designed for Kaiser vehicles, this headlight wire grommet is crafted with precision to ensure a snug and secure fit. Made from advanced rubber compounds, it is resistant to chemicals, sunlight, and ozone, providing long-lasting durability and protection...