null
×
close
1933 Buick Series 50 Catalog and Classic Car Guide, Ratings and Features

Image of 1933 Buick Series 50, sourced from www.flickr.com , Image Link.

Performance Metrics

Performance: +25
Handling: +30
Ride Comfort: +60

Fundamental Metrics

Safety: +20
Maintenance and Upkeep: +40
Restoration Difficulty: +35

Emotional Appeal

Looks: +75
Collectability: +70
Historical Significance: +65

MMP Rating

6.1 /10
Engine Specifications
Engine: Straight-8
Displacement: 230 cubic inches
Horsepower: Estimated 77-100 hp
Torque: Information not available
Compression Ratio: 5.2:1
Ignition System: Distributor and coil
Cooling System: Water-cooled
Performance Specifications
0-60 Time: Information not available
1/4 Mile Time: Information not available
Top Speed: 75 mph
Transmission and Drive
Drive Type: Rear-wheel drive
Transmission Type: 3-speed manual
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: Information not available
Dimensions and Brakes
Brakes: Mechanical drum brakes
Wheelbase: 114 inches
Weight: 3,400 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

Unveiling the Elegance of the 1933 Buick Series 50

The year 1933 marked a defining moment for Buick with the introduction of the Series 50, a car that not only encapsulated the luxury and innovation of its era but also stood as a testament to American automotive craftsmanship. Born during a time of economic turmoil, the Series 50 emerged from the Buick Motor Division of General Motors, a company already renowned for its engineering excellence and commitment to quality. This vehicle was not just a mode of transportation; it was an emblem of hope and progress, with a unique story that included gracing the streets during the World's Fair in Chicago, showcasing the pinnacle of automotive design.

Design and Innovation

The 1933 Buick Series 50 was a feast for the eyes, boasting an exterior that combined bold lines with an air of sophistication. The chrome grille, a signature Buick feature, gleamed proudly at the forefront, flanked by sweeping fenders that hinted at both strength and grace. Inside, occupants were greeted by an interior that exuded luxury, with high-quality fabrics and wood accents that spoke volumes about the craftsmanship of the era. Technologically advanced for its time, the Series 50 featured innovations such as an improved synchromesh transmission and downdraft carburetion, which were groundbreaking. Color options ranged from deep blues to rich maroons, with black remaining a perennial favorite among discerning buyers. Among the various body styles available, including coupes and sedans, the Sport Coupe with its rumble seat became an iconic symbol of this storied model.

Historical Significance

The Series 50 was more than just another car; it was a harbinger of change in automotive design and technology. Its introduction came at a time when America sought symbols of resilience and Buick delivered by blending style with substance. The vehicle's impact extended beyond its aesthetics; it set new standards in performance and comfort that influenced future generations of automobiles.

Performance and Handling

Underneath its stylish exterior lay an engine capable of delivering impressive performance figures for its time. The Series 50's straight-eight engine allowed it to reach commendable top speeds while providing smooth acceleration from standstill to cruising velocity. On winding roads or when encountering rough surfaces, drivers praised the car for its solid handling characteristics—a result of Buick's meticulous suspension tuning. Behind the wheel, one could hear the symphony of mechanical precision—the hum of the engine—and feel connected to the road through responsive steering and well-balanced controls.

Ownership Experience

Owners of the 1933 Buick Series 50 typically reveled in its dual role as both a reliable daily driver and an esteemed showpiece at car events. Its robust construction meant maintenance was straightforward for those familiar with pre-war automotive technology. Reliability was one of its strong suits, though finding parts today can be part of the charm associated with owning such a classic piece.

Fun Facts

The Series 50 has had its share of limelight including being owned by celebrities and appearing in period films which added to its allure. While not known for setting speed records, it held its own in terms of sales success despite economic hardships. Common criticisms often revolved around fuel consumption—a non-issue for enthusiasts who value character over efficiency.

Collector's Information

As for collectors today, finding a 1933 Buick Series 50 can be akin to uncovering hidden treasure. Production numbers were limited due to economic constraints at the time—estimated to be several thousand—making each surviving example quite rare. In terms of value, well-preserved or expertly restored models can fetch significant sums in today's market, often ranging from $40,000 to well over $100,000 depending on provenance and condition.

Conclusion

The 1933 Buick Series 50 is more than just an antique automobile; it is a rolling piece of history that embodies the resilience and ingenuity of its age. Owning one is not merely about possession but about stewardship—preserving a chapter in automotive heritage that continues to captivate enthusiasts around the world.

1933 Buick Series 50 Catalog of Parts

1933 Buick Series 50 Clutch and Brake Pedal Pads.  2-3/4 wide X 3-3/8 long-CB 12 1933 Buick Series 50 Clutch and Brake Pedal Pads. 2-3/4" wide X 3-3/8" long-CB 12Clutch and Brake Pedal Pads. 2-3/4" wide X 3-3/8" long. Pair

1933 Buick Series 50 Clutch and Brake Pedal Pads.  2-3/4 wide X 3-3/4 long-CB 13 1933 Buick Series 50 Clutch and Brake Pedal Pads. 2-3/4" wide X 3-3/4" long-CB 13Clutch and Brake Pedal Pads. 2-3/4" wide X 3-3/4" long. Pair

1933 Buick Series 50 Door Bumper.  Exact reproduction-DB 14-A 1933 Buick Series 50 Door Bumper. Exact reproduction-DB 14-ADoor Bumper. Exact reproduction. 1-3/16" high X 1-9/16" wide X 9/16" thick. Each

1933 Buick Series 50 Upper Door Hinge Post Bumper.  Held by screw-DB 60-A 1933 Buick Series 50 Upper Door Hinge Post Bumper. Held by screw-DB 60-AUpper Door Hinge Post Bumper. Held by screw. 7/8" diameter X 1/8" thick. Each

1933 Buick Series 50 Door Bumper.  1-7/16 high X 1-9/16 wide X 9/16 thick-DB 7 1933 Buick Series 50 Door Bumper. 1-7/16" high X 1-9/16" wide X 9/16" thick-DB 7Door Bumper. 1-7/16" high X 1-9/16" wide X 9/16" thick. Each

1933 Buick Series 50 Gas Filler Grommet.  2-1/4 I.D., 4-3/4 O.D.  Each-GF 9 1933 Buick Series 50 Gas Filler Grommet. 2-1/4" I.D., 4-3/4" O.D. Each-GF 9Gas Filler Grommet. 2-1/4" I.D., 4-3/4" O.D. Each







1933 Buick Series 50 Windshield Wiper Transmission Pad-MP 134-C 1933 Buick Series 50 Windshield Wiper Transmission Pad-MP 134-CWindshield Wiper Transmission Pad. 2-1/8" wide X 2-3/8" long. Each


1933 Buick Series 50 Headlight Bracket Pads.  2-3/8 wide X 3-3/8 long.  Pair-MP 140 1933 Buick Series 50 Headlight Bracket Pads. 2-3/8" wide X 3-3/8" long. Pair-MP 140Headlight Bracket Pads. 2-3/8" wide X 3-3/8" long. Pair




1933 Buick Series 50 Door Handle Ferrule Grommet.  I.D. 11/16, O.D. 1-3/16-MP 546-I 1933 Buick Series 50 Door Handle Ferrule Grommet. I.D. 11/16", O.D. 1-3/16"-MP 546-IDoor Handle Ferrule Grommet. I.D. 11/16", O.D. 1-3/16". Each



1933 Buick Series 50 Steering Column to Floor Plate Pad-SC 28 1933 Buick Series 50 Steering Column to Floor Plate Pad-SC 28Steering Column to Floor Plate Pad. Black (also in Brown #SC 29). Each

1933 Buick Series 50 Steering Column to Floor Plate Pad-SC 29 1933 Buick Series 50 Steering Column to Floor Plate Pad-SC 29Steering Column to Floor Plate Pad. Brown (also in Black #SC 28). Each

1933 Buick Series 50 Flexible glass-run channel-WC 11-72 1933 Buick Series 50 Flexible glass-run channel-WC 11-72Flexible glass-run channel. Mohair lined, cloth covered with stainless steel bead. Used on side windows. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned in two equal lengths to reduce overseas shipping costs.

1933 Buick Series 50 Rigid division-bar channel. Made with stainless steel bead-WC 2-72 1933 Buick Series 50 Rigid division-bar channel. Made with stainless steel bead-WC 2-72Rigid division-bar channel. Made with stainless steel bead. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.

1933 Buick Series 50 Flexible Rubber Window Channel-WC 32-14 1933 Buick Series 50 Flexible Rubber Window Channel-WC 32-14Flexible Rubber Window Channel. For Fisher Closed Bodies, except those using a stainless bead type. Used on side windows. 13/16" outer width X 6/16" outer depth, with a 5/16" inner channel width X 14" long. Each

1933 Buick Series 50 Flexible sweeper. Made with stainless steel bead-WC 8-72 1933 Buick Series 50 Flexible sweeper. Made with stainless steel bead-WC 8-72Flexible sweeper. Made with stainless steel bead. Used on inner and outer beltlines. Also forms easily for use with sliding quarter windows. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.

1933 Buick Series 50 Fender Bolts.  For use with Fender Bolt Washers; WF 3001-WF 3000 1933 Buick Series 50 Fender Bolts. For use with Fender Bolt Washers; WF 3001-WF 3000Fender Bolts. For use with Fender Bolt Washers; WF 3001. Zinc Chromate plated, high strength. 1" X 5/16". Set of 25

1933 Buick Series 50 Fender Bolt Washers.  For use with Fender Bolts; WF 3000-WF 3001 1933 Buick Series 50 Fender Bolt Washers. For use with Fender Bolts; WF 3000-WF 3001Fender Bolt Washers. For use with Fender Bolts; WF 3000. High quality, cadmium plated. 1-1/4" O.D., 3/8" I.D. Set of 25

Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help