×
close
1935 Buick Series 90 Catalog and Classic Car Guide, Ratings and Features

Image of 1935 Buick Series 90, sourced from www.conceptcarz.com , Image Link.

Performance Metrics

Performance: +30
Handling: +25
Ride Comfort: +70

Fundamental Metrics

Safety: +20
Maintenance and Upkeep: +40
Restoration Difficulty: +30

Emotional Appeal

Looks: +80
Collectability: +75
Historical Significance: +60

MMP Rating

6.1 /10
Engine Specifications
Engine: Straight 8
Displacement: 320.2 cu in (5.2 L)
Horsepower: Estimated 96-120 hp
Torque: Not available
Compression Ratio: Not available
Ignition System: Battery and coil
Cooling System: Water
Performance Specifications
0-60 Time: Not available
1/4 Mile Time: Not available
Top Speed: 85 mph
Transmission and Drive
Drive Type: Rear wheel drive
Transmission Type: 3-speed manual
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: Not available
Dimensions and Brakes
Brakes: Drum brakes
Wheelbase: 128-138 inches
Weight: Estimated 4,500-5,000 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

Unveiling the Grandeur of the 1935 Buick Series 90

The 1935 Buick Series 90 stands as a testament to an era when automobiles were not just modes of transportation but also symbols of innovation and luxury. This majestic vehicle, crafted by the esteemed Buick Motor Company, emerged during a time when America was grappling with the Great Depression, yet it managed to capture the imaginations of car enthusiasts and the elite alike. A unique fact that piques interest is that the Series 90 was the largest and most luxurious model in Buick's lineup, often referred to as the "limousine for the masses."

Design and Innovation

The exterior styling of the Series 90 exuded opulence and grandeur, with its long, sweeping fenders and a bold, vertical-bar grille that commanded attention. The car's silhouette was a harmonious blend of art deco elegance and industrial might. Inside, passengers were enveloped in a cabin adorned with high-quality fabrics and wood trimmings that spoke volumes about its craftsmanship. Technologically, it boasted innovations like Knee-Action independent front suspension, which was quite advanced for its time. Color options ranged from stately blacks to rich blues, with deep maroons being particularly popular among the discerning buyers. The Series 90 was available in various body styles including sedans, coupes, and convertibles, but it was the limousine model that truly defined luxury.

Historical Significance

The Buick Series 90's impact on automotive design cannot be overstated. It set a new standard for luxury vehicles with its combination of style, comfort, and technology. Its introduction of features like an independent front suspension system paved the way for better vehicle handling and ride comfort that would eventually become industry standards.

Performance and Handling

Underneath its stately hood lay a powerful 320 cubic-inch straight-eight engine that propelled the Series 90 to impressive speeds for its size and era. While top speed figures are elusive, this behemoth was no slouch on the open road. Handling was surprisingly nimble for a vehicle of its stature due to its advanced suspension system, allowing drivers to navigate through various conditions with confidence. The driving experience was one of smooth power delivery accompanied by the melodic hum of its robust engine—a symphony for any motoring aficionado.

Ownership Experience

In its heyday, the Series 90 served multiple roles from a prestigious daily driver to an elegant show car gracing high-profile events. Maintenance required a dedicated owner willing to preserve such luxury; however, Buick's reputation for reliability meant that upkeep was less daunting than one might expect for such a sophisticated machine.

Fun Facts

The 1935 Buick Series 90 has had its share of limelight with rare editions that featured custom coachwork. Celebrity ownerships added to its allure, while it also made appearances at significant historical events. While some critics may have pointed out its heft or fuel consumption, these were mere footnotes in its storied existence.

Collector's Information

Today, collectors cherish the 1935 Buick Series 90 for its rarity and historical value. With production numbers not as high as mass-market vehicles of the time, it's estimated that only a few thousand were made. As such, finding one in pristine condition can be akin to uncovering hidden treasure. Values can vary widely based on condition and provenance but expect well-maintained examples to fetch anywhere from mid-five figures up into six-figure territory at auction or private sale.

Conclusion

The 1935 Buick Series 90 is more than just an automobile; it is a rolling piece of art and an enduring symbol of pre-war American luxury. Its blend of design elegance, technological advancement, and commanding presence has cemented its place in automotive history. For those lucky enough to own one today, it represents not just an investment but a cherished heirloom that continues to tell a story of innovation and grandeur.

1935 Buick Series 90 Catalog of Parts

1935 Buick Series 90 Door Bumper.  Exact reproduction-DB 14-A 1935 Buick Series 90 Door Bumper. Exact reproduction-DB 14-ADoor Bumper. Exact reproduction. 1-3/16" high X 1-9/16" wide X 9/16" thick. Each

1935 Buick Series 90 Upper Door Hinge Post Bumper.  Held by screw-DB 60-A 1935 Buick Series 90 Upper Door Hinge Post Bumper. Held by screw-DB 60-AUpper Door Hinge Post Bumper. Held by screw. 7/8" diameter X 1/8" thick. Each

1935 Buick Series 90 Inner and Outer Center Division Bar Seals-DP 20 1935 Buick Series 90 Inner and Outer Center Division Bar Seals-DP 20Inner and Outer Center Division Bar Seals. Each piece 14-1/4" long. Set

1935 Buick Series 90 Gas Filler Grommet.  2-1/4 I.D., 4-3/4 O.D.  Each-GF 9 1935 Buick Series 90 Gas Filler Grommet. 2-1/4" I.D., 4-3/4" O.D. Each-GF 9Gas Filler Grommet. 2-1/4" I.D., 4-3/4" O.D. Each




1935 Buick Series 90 Park Light Pads.  Fits 1-1/16 wide metal-MP 136 1935 Buick Series 90 Park Light Pads. Fits 1-1/16" wide metal-MP 136Park Light Pads. Fits 1-1/16" wide metal. 1-1/2" wide X 10-1/4" long. Pair

1935 Buick Series 90 Park Light Pads.  Fits 7/8 wide metal-MP 137 1935 Buick Series 90 Park Light Pads. Fits 7/8" wide metal-MP 137Park Light Pads. Fits 7/8" wide metal. 1-1/8" wide X 10-1/4" long. Pair

1935 Buick Series 90 Park Light Pads.  Fits 1-1/8 metal-MP 143 1935 Buick Series 90 Park Light Pads. Fits 1-1/8" metal-MP 143Park Light Pads. Fits 1-1/8" metal. 1-1/2 wide X 9-3/8" long. Pair


1935 Buick Series 90 Door Handle Ferrule Grommet.  I.D. 11/16, O.D. 1-3/16-MP 546-I 1935 Buick Series 90 Door Handle Ferrule Grommet. I.D. 11/16", O.D. 1-3/16"-MP 546-IDoor Handle Ferrule Grommet. I.D. 11/16", O.D. 1-3/16". Each

1935 Buick Series 90 Door Lock Knob.  Brown.  1/2 diameter X 1 long X 1/8 hole-RP 303 1935 Buick Series 90 Door Lock Knob. Brown. 1/2" diameter X 1" long X 1/8" hole-RP 303Door Lock Knob. Brown. 1/2" diameter X 1" long X 1/8" hole. Each



1935 Buick Series 90 Steering Column to Floor Plate Pad-SC 28 1935 Buick Series 90 Steering Column to Floor Plate Pad-SC 28Steering Column to Floor Plate Pad. Black (also in Brown #SC 29). Each

1935 Buick Series 90 Steering Column to Floor Plate Pad-SC 29 1935 Buick Series 90 Steering Column to Floor Plate Pad-SC 29Steering Column to Floor Plate Pad. Brown (also in Black #SC 28). Each

1935 Buick Series 90 Vertical Seal for Vent Window.  Each is 17 long.  Pair-VS 2 1935 Buick Series 90 Vertical Seal for Vent Window. Each is 17" long. Pair-VS 2Vertical Seal for Vent Window. Each is 17" long. Pair

1935 Buick Series 90 Flexible glass-run channel-WC 11-72 1935 Buick Series 90 Flexible glass-run channel-WC 11-72Flexible glass-run channel. Mohair lined, cloth covered with stainless steel bead. Used on side windows. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned in two equal lengths to reduce overseas shipping costs.

1935 Buick Series 90 Rigid division-bar channel. Made with stainless steel bead-WC 2-72 1935 Buick Series 90 Rigid division-bar channel. Made with stainless steel bead-WC 2-72Rigid division-bar channel. Made with stainless steel bead. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.

1935 Buick Series 90 Flexible Rubber Window Channel-WC 32-14 1935 Buick Series 90 Flexible Rubber Window Channel-WC 32-14Flexible Rubber Window Channel. For Fisher Closed Bodies, except those using a stainless bead type. Used on side windows. 13/16" outer width X 6/16" outer depth, with a 5/16" inner channel width X 14" long. Each

1935 Buick Series 90 Flexible sweeper. Made with stainless steel bead-WC 8-72 1935 Buick Series 90 Flexible sweeper. Made with stainless steel bead-WC 8-72Flexible sweeper. Made with stainless steel bead. Used on inner and outer beltlines. Also forms easily for use with sliding quarter windows. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.

1935 Buick Series 90 Fender Bolts.  For use with Fender Bolt Washers; WF 3001-WF 3000 1935 Buick Series 90 Fender Bolts. For use with Fender Bolt Washers; WF 3001-WF 3000Fender Bolts. For use with Fender Bolt Washers; WF 3001. Zinc Chromate plated, high strength. 1" X 5/16". Set of 25

1935 Buick Series 90 Fender Bolt Washers.  For use with Fender Bolts; WF 3000-WF 3001 1935 Buick Series 90 Fender Bolt Washers. For use with Fender Bolts; WF 3000-WF 3001Fender Bolt Washers. For use with Fender Bolts; WF 3000. High quality, cadmium plated. 1-1/4" O.D., 3/8" I.D. Set of 25

1935 Buick Series 90 Front Vent Window Seals.  Does not fit Convertible-WR 7317 1935 Buick Series 90 Front Vent Window Seals. Does not fit Convertible-WR 7317Front Vent Window Seals. Does not fit Convertible. Pair R&L

Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help