×
close
1960 Buick Invicta Catalog and Classic Car Guide, Ratings and Features

Image of 1960 Buick Invicta, sourced from www.motortrend.com , Image Link.

Performance Metrics

Performance: +60
Handling: +45
Ride Comfort: +70

Fundamental Metrics

Safety: +30
Maintenance and Upkeep: +55
Restoration Difficulty: +50

Emotional Appeal

Looks: +75
Collectability: +65
Historical Significance: +40

MMP Rating

5.8 /10
Engine Specifications
Engine: Wildcat 445 V8
Displacement: 401 cu in (6.6 L)
Horsepower: 325 hp
Torque: 445 lb-ft
Compression Ratio: 10.25:1
Ignition System: Conventional points ignition system
Cooling System: Liquid-cooled
Performance Specifications
0-60 Time: 8.5 seconds
1/4 Mile Time: 16 seconds
Top Speed: 125 mph
Transmission and Drive
Drive Type: Rear-wheel drive
Transmission Type: 2-speed automatic or 3-speed manual
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: 10-12 mpg
Dimensions and Brakes
Brakes: Drum brakes
Wheelbase: 123 inches
Weight: 4,400 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

Unveiling the 1960 Buick Invicta: A Testament to American Luxury and Style

The 1960 Buick Invicta emerged as a beacon of American automotive luxury, boasting a blend of power, elegance, and comfort that was unparalleled in its time. Born from the storied Buick division of General Motors, the Invicta model was introduced to bridge the gap between the opulent Electra and the more modest LeSabre. Its name, meaning "unconquered" in Latin, set a high bar for performance and prestige. The Invicta carved its niche in an era where cars were not just modes of transportation but symbols of status and innovation. One notable moment in its history was when it became a canvas for custom coachbuilders, transforming it into a bespoke masterpiece that catered to the whims of affluent clients.

Design and Innovation: The Artistry Behind the Invicta

The exterior styling of the 1960 Buick Invicta was a sight to behold, with its long sweeping lines, chrome accents, and iconic delta fins that exuded a sense of motion even at a standstill. The vehicle's interior was equally impressive, featuring rich fabrics and top-grade materials that underscored Buick's commitment to luxury. For those behind the wheel, technological advancements such as power steering and brakes were cutting-edge features that enhanced the driving experience. Color options ranged from classic whites and blacks to more adventurous hues like Fawn Metallic and Cherokee Red, with each choice further personalizing the vehicle. Among body styles, the convertible stood out as an emblem of freedom and style, capturing hearts with its open-air allure.

Historical Significance: The Invicta's Enduring Legacy

The 1960 Buick Invicta left an indelible mark on automotive design with its bold yet elegant aesthetics. It set itself apart from contemporaries through its perfect balance of performance and luxury—a combination that became a hallmark for future generations of vehicles. Its influence can still be seen in modern cars that strive to achieve this golden ratio.

Performance and Handling: The Thrill of Driving an Invicta

Underneath its stylish exterior lay a robust 401 cubic-inch "Nailhead" V8 engine capable of delivering 325 horsepower. This powerplant propelled the Invicta from 0-60 mph in under nine seconds—a remarkable feat for its size. Handling was surprisingly nimble for such a luxurious cruiser; it glided over imperfections in the road while maintaining composure on winding paths. The symphony of its engine's rumble paired with the smoothness of the ride created an exhilarating yet comfortable driving experience.

Ownership Experience: Living with an Automotive Icon

The 1960 Buick Invicta found its place in various roles—from daily driving to gracing car shows or even occasional racing events. Maintenance was typical for cars of its era; while reliability was generally good, some components could be challenging to source due to their age. Nevertheless, those who owned one often spoke of their love affair with this classic beauty.

Fun Facts: The Invicta's Unique Place in History

This model has been associated with celebrity ownerships and has made appearances in films and television shows adding to its allure. Although not known for breaking speed records, it did set benchmarks for what luxury meant in an American car.

Collector's Information: Investing in Automotive Elegance

Today, the value range for a well-maintained 1960 Buick Invicta can vary greatly depending on condition, history, and originality. With production numbers estimated in the tens of thousands across all body styles, finding one in pristine condition can be challenging but not impossible. Values have generally appreciated over time as classic car enthusiasts seek out models that epitomize the era's luxury and style.

Conclusion: Celebrating the Unconquered Spirit of the 1960 Buick Invicta

The 1960 Buick Invicta stands as more than just a car; it is a testament to an era where luxury met performance on America's open roads. Its lasting appeal is evident in every polished chrome detail and every purr of its mighty Nailhead engine—a true classic that continues to captivate collectors and enthusiasts alike.

1960 Buick Invicta Catalog of Parts

1960 Buick Invicta Rear Quarter Window Seal for Convertibles-ALP 12 1960 Buick Invicta Rear Quarter Window Seal for Convertibles-ALP 12Rear Quarter Window Seal for Convertibles. Used on door lock pillar. Made with metal cores. Pair R&L

1960 Buick Invicta Upper Door Hinge J Seals.  Straight section 15-1/2 long-ALP 1-B 1960 Buick Invicta Upper Door Hinge "J" Seals. Straight section 15-1/2" long-ALP 1-BUpper Door Hinge "J" Seals. Straight section 15-1/2" long. Square hooked section 7" long, with 2 holes. Includes four clips. Pair R&L

1960 Buick Invicta Shock Absorber Grommet.  1 bottom O.D., 3/4 high-BN 1 1960 Buick Invicta Shock Absorber Grommet. 1" bottom O.D., 3/4" high-BN 1Shock Absorber Grommet. 1" bottom O.D., 3/4" high., with 7/16" I.D. Each

1960 Buick Invicta Shock Absorber Grommet.  1 bottom O.D-BN 11 1960 Buick Invicta Shock Absorber Grommet. 1" bottom O.D-BN 11Shock Absorber Grommet. 1" bottom O.D., 3/4" high, with 5/8" I.D. Each

1960 Buick Invicta Front coil-spring insulator-BN 110 1960 Buick Invicta Front coil-spring insulator-BN 110Front coil-spring insulator. Fits '41-'60 Oldsmobile and '50-'83 GM passenger models. 5-3/8 in. OD x 3-3/4 in. ID x 3/4 in. high with 13/16 in. wide bottom flange 1/4" thick, 12 flutes. Each.

1960 Buick Invicta Front Stabilizer End Repair Kit-BNK 21 1960 Buick Invicta Front Stabilizer End Repair Kit-BNK 21Front Stabilizer End Repair Kit. 22-piece set for two stabilizer bars. Contains all rubber bushings, washers, bolts and nuts, enough for one front end. Set

1960 Buick Invicta Windshield Pillar Seals for Convertibles-CZ 8000 1960 Buick Invicta Windshield Pillar Seals for Convertibles-CZ 8000Windshield Pillar Seals for Convertibles. Molded of closed cell sponge as per original. Pair R&L

1960 Buick Invicta Door Bumper.  13/16 high X 1/2 wide X 1 long.  Each-DB 33-A 1960 Buick Invicta Door Bumper. 13/16" high X 1/2" wide X 1" long. Each-DB 33-ADoor Bumper. 13/16" high X 1/2" wide X 1" long. Each

1960 Buick Invicta Door Bumper.  1-3/16 high X 5/8 wide X 1 long.  Each-DB 33-B 1960 Buick Invicta Door Bumper. 1-3/16" high X 5/8" wide X 1" long. Each-DB 33-BDoor Bumper. 1-3/16" high X 5/8" wide X 1" long. Each

1960 Buick Invicta Upper Door Hinge Post Bumper.  Held by screw-DB 60-A 1960 Buick Invicta Upper Door Hinge Post Bumper. Held by screw-DB 60-AUpper Door Hinge Post Bumper. Held by screw. 7/8" diameter X 1/8" thick. Each

1960 Buick Invicta Door, Hood and Trunk Bumper Cap for adjustment bolt-HA 5 1960 Buick Invicta Door, Hood and Trunk Bumper Cap for adjustment bolt-HA 5Door, Hood and Trunk Bumper Cap for adjustment bolt. 7/8" diameter X 7/16" thick. Each

1960 Buick Invicta Door and Hood Bumper.  1 diameter X 7/8 thick.  Each-HF 16 1960 Buick Invicta Door and Hood Bumper. 1" diameter X 7/8" thick. Each-HF 16Door and Hood Bumper. 1" diameter X 7/8" thick. Each

1960 Buick Invicta Trip Meter Reset Knob.  Made of black rubber-KN 10 1960 Buick Invicta Trip Meter Reset Knob. Made of black rubber-KN 10Trip Meter Reset Knob. Made of black rubber. Compare to measurements: 1/8" I.D., 7/16" O.D. X 1/2" tall. Each

1960 Buick Invicta Odometer Trip Knob.  Made of black rubber-KN 11 1960 Buick Invicta Odometer Trip Knob. Made of black rubber-KN 11Odometer Trip Knob. Made of black rubber. Compare to measurements: 1/8" I.D., 7/16" O.D. X 7/16" tall. Each

1960 Buick Invicta Molded Door Seals.  For 2-door hardtop and convertible-LM 18-E 1960 Buick Invicta Molded Door Seals. For 2-door hardtop and convertible-LM 18-EMolded Door Seals. For 2-door hardtop and convertible. Replaces OEM #4801932/3. Pair R&L

1960 Buick Invicta Rear door seals, ’59-‘60 GM ‘A’-LM 18-G 1960 Buick Invicta Rear door seals, ’59-‘60 GM ‘A’-LM 18-GRear door seals, '59-'60 GM 'A', 'B' & 'C' body 4 door sedan models, pair. Replaces OEM #'s 4758671/4758672.

1960 Buick Invicta Door Lock Knob.  Made of Black rubber, self-threading-RP 304-A 1960 Buick Invicta Door Lock Knob. Made of Black rubber, self-threading-RP 304-ADoor Lock Knob. Made of Black rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Slate Blue rubber, self-threading-RP 304-C 1960 Buick Invicta Door Lock Knob. Made of Slate Blue rubber, self-threading-RP 304-CDoor Lock Knob. Made of Slate Blue rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Navy Blue rubber, self-threading-RP 304-D 1960 Buick Invicta Door Lock Knob. Made of Navy Blue rubber, self-threading-RP 304-DDoor Lock Knob. Made of Navy Blue rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Silver Blue rubber, self-threading-RP 304-E 1960 Buick Invicta Door Lock Knob. Made of Silver Blue rubber, self-threading-RP 304-EDoor Lock Knob. Made of Silver Blue rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Fawn colored rubber, self-threading-RP 304-F 1960 Buick Invicta Door Lock Knob. Made of Fawn colored rubber, self-threading-RP 304-FDoor Lock Knob. Made of Fawn colored rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Olive Green rubber, self-threading-RP 304-G 1960 Buick Invicta Door Lock Knob. Made of Olive Green rubber, self-threading-RP 304-GDoor Lock Knob. Made of Olive Green rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Yellow rubber, self-threading-RP 304-H 1960 Buick Invicta Door Lock Knob. Made of Yellow rubber, self-threading-RP 304-HDoor Lock Knob. Made of Yellow rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of White rubber, self-threading-RP 304-I 1960 Buick Invicta Door Lock Knob. Made of White rubber, self-threading-RP 304-IDoor Lock Knob. Made of White rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Silver rubber, self-threading-RP 304-J 1960 Buick Invicta Door Lock Knob. Made of Silver rubber, self-threading-RP 304-JDoor Lock Knob. Made of Silver rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Medium Brown rubber, self-threading-RP 304-K 1960 Buick Invicta Door Lock Knob. Made of Medium Brown rubber, self-threading-RP 304-KDoor Lock Knob. Made of Medium Brown rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Wedgwood rubber, self-threading-RP 304-L 1960 Buick Invicta Door Lock Knob. Made of Wedgwood rubber, self-threading-RP 304-LDoor Lock Knob. Made of Wedgwood rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Teal Green rubber, self-threading-RP 304-M 1960 Buick Invicta Door Lock Knob. Made of Teal Green rubber, self-threading-RP 304-MDoor Lock Knob. Made of Teal Green rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Moss Green rubber, self-threading-RP 304-N 1960 Buick Invicta Door Lock Knob. Made of Moss Green rubber, self-threading-RP 304-NDoor Lock Knob. Made of Moss Green rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Door Lock Knob.  Made of Ember glow rubber, self-threading-RP 304-O 1960 Buick Invicta Door Lock Knob. Made of Ember glow rubber, self-threading-RP 304-ODoor Lock Knob. Made of Ember glow rubber, self-threading. 1-3/8" tall with 1/8" lower I.D., 3/8" lower O.D. Each

1960 Buick Invicta Roof rail seals-RR 8120-B 1960 Buick Invicta Roof rail seals-RR 8120-BRoof rail seals, '59-'60 GM 'A' and 'B' body 4 door hardtop models, pair. Replaces OEM #'s 4782170/4782171/4783149/4783150.

1960 Buick Invicta Door Bumper.  Made with twin retainers-SB 32 1960 Buick Invicta Door Bumper. Made with twin retainers-SB 32Door Bumper. Made with twin retainers. 3/4" high X 1/2" wide X 15/16" long. Each

1960 Buick Invicta Trunk Bumper.  Fits lower corner on decklid.  15/16 O.D-SB 34 1960 Buick Invicta Trunk Bumper. Fits lower corner on decklid. 15/16" O.D-SB 34Trunk Bumper. Fits lower corner on decklid. 15/16" O.D., 11/16" high. Each

1960 Buick Invicta Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35 1960 Buick Invicta Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35Door Bumper, 57-74 GM Cars, made with twin retainers, Each. Measure 1-1/16" high X 19/32" wide X 1-1/32" long.

1960 Buick Invicta Special Purpose Grommet-SM 4 1960 Buick Invicta Special Purpose Grommet-SM 4Special Purpose Grommet. For firewall, fuel gauge wire, horn wire, hood latch cable and fresh air cable. Fits 1/2" hole. 1/8" center hole. Each

1960 Buick Invicta Firewall and Utility Grommet.  Fits 3/4 hole.  3/16 I.D-SM 8 1960 Buick Invicta Firewall and Utility Grommet. Fits 3/4" hole. 3/16" I.D-SM 8Firewall and Utility Grommet. Fits 3/4" hole. 3/16" I.D. Each


1960 Buick Invicta Unbeaded Door and Trunk Lock Gasket.  1-3/16 O.D., 7/8 I.D-UM 1600-100 1960 Buick Invicta Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D-UM 1600-100Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D. Each

1960 Buick Invicta Vertical Seal for Vent Window.  Each is 17 long.  Pair-VS 2 1960 Buick Invicta Vertical Seal for Vent Window. Each is 17" long. Pair-VS 2Vertical Seal for Vent Window. Each is 17" long. Pair

1960 Buick Invicta Vulcanized Windshield Seal, for 2-Door Hardtops.  Each-VWS 0566 1960 Buick Invicta Vulcanized Windshield Seal, for 2-Door Hardtops. Each-VWS 0566Vulcanized Windshield Seal, for 2-Door Hardtops. Each

1960 Buick Invicta Vulcanized Windshield Seal, for 2-Door and 4-Door Sedans-VWS 0567 1960 Buick Invicta Vulcanized Windshield Seal, for 2-Door and 4-Door Sedans-VWS 0567Vulcanized Windshield Seal, for 2-Door and 4-Door Sedans. Each

1960 Buick Invicta Vulcanized Rear Windshield Seal-VWS 3006-R 1960 Buick Invicta Vulcanized Rear Windshield Seal-VWS 3006-RVulcanized Rear Windshield Seal. For 2-door hardtop without interior garnish molding. Each

1960 Buick Invicta Vulcanized Rear Windshield Seal-VWS 3007-R 1960 Buick Invicta Vulcanized Rear Windshield Seal-VWS 3007-RVulcanized Rear Windshield Seal. For 2-door hardtop with interior garnish molding. Each

1960 Buick Invicta Flexible glass-run channel-WC 11-72 1960 Buick Invicta Flexible glass-run channel-WC 11-72Flexible glass-run channel. Mohair lined, cloth covered with stainless steel bead. Used on side windows. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned in two equal lengths to reduce overseas shipping costs.

1960 Buick Invicta Rigid division-bar channel. Made with Zinc-plated bead-WC 1-72 1960 Buick Invicta Rigid division-bar channel. Made with Zinc-plated bead-WC 1-72Rigid division-bar channel. Made with Zinc-plated bead. Used on lower side windows. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.

1960 Buick Invicta Rigid division-bar channel. Made with Zinc-plated bead-WC 1-96 1960 Buick Invicta Rigid division-bar channel. Made with Zinc-plated bead-WC 1-96Rigid division-bar channel. Made with Zinc-plated bead. Used on lower side windows. 96 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned in two or three equal lengths to reduce overseas shipping costs.

1960 Buick Invicta Rigid division-bar channel. Made with stainless steel bead-WC 2-72 1960 Buick Invicta Rigid division-bar channel. Made with stainless steel bead-WC 2-72Rigid division-bar channel. Made with stainless steel bead. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.

1960 Buick Invicta Flexible sweeper. Made with stainless steel bead-WC 8-72 1960 Buick Invicta Flexible sweeper. Made with stainless steel bead-WC 8-72Flexible sweeper. Made with stainless steel bead. Used on inner and outer beltlines. Also forms easily for use with sliding quarter windows. 72 in. long. Each. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs. Part can be sectioned into two equal lengths to reduce overseas shipping costs.

1960 Buick Invicta Vent window with rear division channel seals-WR 2002-B 1960 Buick Invicta Vent window with rear division channel seals-WR 2002-BVent window with rear division channel seals - left and right, '59-'60 GM 'A', 'B' & 'C' body 2 & 4 door hardtop and convertible models, four piece set. Main seals replace OEM #'s 4304478/4304479 only.

Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help