×
close
1967 Buick Electra Catalog and Classic Car Guide, Ratings and Features

Image of 1967 Buick Electra, sourced from www.sjclassics.com , Image Link.

Performance Metrics

Performance: +60
Handling: +50
Ride Comfort: +70

Fundamental Metrics

Safety: +40
Maintenance and Upkeep: +65
Restoration Difficulty: +55

Emotional Appeal

Looks: +75
Collectability: +60
Historical Significance: +50

MMP Rating

6 /10
Engine Specifications
Engine: Buick 430 V8
Displacement: 430 cu in (7.0 L)
Horsepower: 360 hp
Torque: 475 lb-ft
Compression Ratio: 10.5:1
Ignition System: Conventional distributor and coil system
Cooling System: Liquid-cooled
Performance Specifications
0-60 Time: 8.5 seconds
1/4 Mile Time: 16 seconds
Top Speed: 125 mph
Transmission and Drive
Drive Type: Rear-wheel drive
Transmission Type: 3-speed automatic
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: 10-12 mpg
Dimensions and Brakes
Brakes: Power-assisted drum brakes
Wheelbase: 126 inches
Weight: 4,500 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

Unveiling the 1967 Buick Electra: A Blend of Luxury and Power

The year 1967 witnessed the birth of a vehicle that would leave an indelible mark on the luxury car segment: the Buick Electra. Crafted by the esteemed American automaker Buick, a division of General Motors, this full-size premium automobile was a testament to the brand's commitment to elegance and performance. The Electra, named after a Greek goddess, signified a pinnacle in Buick's lineup, offering a rich blend of comfort and power that was unrivaled in its time. A unique fact that car enthusiasts might find captivating is that the '67 Electra was among the first cars to offer front-wheel disc brakes as an option, signaling Buick's forward-thinking approach to automotive safety and performance.

Design and Innovation: The Epitome of '60s Sophistication

The exterior of the 1967 Buick Electra was a sight to behold, with its long, flowing lines and distinctive "Coke-bottle" styling that was emblematic of the era. The car's imposing front grille, flanked by stacked headlights, exuded confidence and grace. Inside, passengers were cocooned in luxury, surrounded by plush seating upholstered in high-quality materials such as leather or premium cloth. Woodgrain accents adorned the dashboard, conveying a sense of opulence.

Technologically, the Electra was ahead of its time with features like an AM/FM stereo radio, air conditioning, and power windows – conveniences that were considered high-end at the time. The color palette for this model year included classic hues like Arctic White, Regal Black, and Seafoam Green. Among these options, Seafoam Green stood out as a particularly popular choice for its unique reflection of personal style and taste.

Buyers could choose from several body styles including a two-door convertible, two-door hardtop (coupe), four-door hardtop (sedan), and four-door sedan with conventional pillars. The most iconic among these was arguably the two-door convertible, which perfectly captured the free spirit of the '60s.

Historical Significance: A Legacy Cast in Chrome and Steel

The 1967 Buick Electra played a pivotal role in cementing Buick's reputation as a purveyor of luxury vehicles. Its introduction came at a time when American consumers were increasingly seeking out cars that offered both comfort and performance. The Electra set itself apart from competitors with its balanced approach to these demands, offering a ride that was both powerful and refined – characteristics that would influence future generations of luxury automobiles.

Performance and Handling: A Symphony on Wheels

Underneath its elegant exterior lay a robust 430 cubic inch V8 engine that propelled the Electra with authority. With 360 horsepower at its disposal, it could achieve 0-60 mph in under 8 seconds – an impressive feat for such a sizable vehicle. Top speeds were in excess of 120 mph, making it one of the faster luxury cruisers on the market.

The handling characteristics of the '67 Electra were designed to prioritize comfort over sportiness. Its soft suspension absorbed bumps with ease while providing passengers with a serene ride quality reminiscent of gliding on water. Despite its size, it managed windy roads with poise thanks to precise steering and well-tuned shock absorbers. Driving an Electra was an auditory delight as well; the deep rumble of its V8 engine provided an acoustic backdrop that complemented its smooth acceleration.

Ownership Experience: More Than Just a Means to Travel

Owners often used their Electras for various purposes – from daily commuting to attending prestigious car shows or even occasional weekend drag races. Maintenance was straightforward for those familiar with American V8 engines of the era; however, some specialized parts might require sourcing from dedicated classic car suppliers.

Fun Facts: The Electra's Place in History

Among interesting trivia about the '67 Electra is that it found favor among celebrities and influential figures who appreciated its blend of understated style and performance. While it didn't break speed records, it certainly set benchmarks for luxury in its class. It also made cameo appearances in films and television shows set during its heyday.

Collector's Information: A Prized Possession Then and Now

Today, collectors value the 1967 Buick Electra highly due to its rarity and status as an icon of American automotive history. While production numbers were not scarce – with tens of thousands manufactured – finding one in pristine condition can be challenging. Values range widely based on condition but can reach upwards into five figures for well-maintained or restored examples.

Conclusion: The Lasting Allure of the '67 Electra

The 1967 Buick Electra remains a beloved classic that captures the imagination with its blend of luxury and muscle. Its enduring appeal lies not just in its aesthetic or performance but also in what it represents – an era where cars were more than just transportation; they were statements of identity and ambition.

1967 Buick Electra Catalog of Parts

1967 Buick Electra Upper door-lock pillar seal. 2-door hardtop and convertible-ALP 5053 1967 Buick Electra Upper door-lock pillar seal. 2-door hardtop and convertible-ALP 5053Upper door-lock pillar seal. 2-door hardtop and convertible. Does not fit Fastback models. Made with all details and galvanized steel cores. 2-3/16 in. W x 4-11/16 in. L. Pair. R&L.

1967 Buick Electra Shock Absorber Grommet.  1 bottom O.D., 3/4 high-BN 1 1967 Buick Electra Shock Absorber Grommet. 1" bottom O.D., 3/4" high-BN 1Shock Absorber Grommet. 1" bottom O.D., 3/4" high., with 7/16" I.D. Each

1967 Buick Electra Front coil-spring insulator-BN 110 1967 Buick Electra Front coil-spring insulator-BN 110Front coil-spring insulator. Fits '41-'60 Oldsmobile and '50-'83 GM passenger models. 5-3/8 in. OD x 3-3/4 in. ID x 3/4 in. high with 13/16 in. wide bottom flange 1/4" thick, 12 flutes. Each.

1967 Buick Electra Front Stabilizer End Repair Kit-BNK 23 1967 Buick Electra Front Stabilizer End Repair Kit-BNK 23Front Stabilizer End Repair Kit. 22-piece set for two stabilizer bars. Contains all rubber bushings, washers, bolts and nuts, enough for one front end. Set

1967 Buick Electra Butyl Glass Setting Tape-BT 1 1967 Buick Electra Butyl Glass Setting Tape-BT 1Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16" wide X 15' long. Each

1967 Buick Electra Convertible Top Windshield Header Seal-C/LP 40-G 1967 Buick Electra Convertible Top Windshield Header Seal-C/LP 40-GConvertible Top Windshield Header Seal. Clips installed every 3-5/8". Made of soft, black, skin-covered sponge. Sold by the foot.

1967 Buick Electra Clutch and Brake Pedal Pads.  Exact reproduction-CB 99 1967 Buick Electra Clutch and Brake Pedal Pads. Exact reproduction-CB 99Clutch and Brake Pedal Pads. Exact reproduction. 3-1/2" wide. Pair



1967 Buick Electra Pillar Post Seals, 66-68 GM B  C Body Convertibles, Pair-CZ 8100-A 1967 Buick Electra Pillar Post Seals, 66-68 GM B & C Body Convertibles, Pair-CZ 8100-APillar Post Seals, 66-68 GM B & C Body Convertibles. Replaces OEM #'s 7602728 & 7602729. Also known as hinge pillar weatherstrips, this part can be found between the A-pillar post and the front door on convertible models. Our part has embedded cores surrounding the main mounting holes for extra strength when installing with original hardware.

1967 Buick Electra Top Bow to Header Seal (fits late '66-'70 GM B body-HD 731 1967 Buick Electra Top Bow to Header Seal (fits late '66-'70 GM "B" body-HD 731Top Bow to Header Seal (fits late '66-'70 GM "B" body, '65-'70 GM "C" body). Made of smooth, skin-covered sponge, with steel core and molded ends, like original. 56-1/2" Long. Each

1967 Buick Electra Trip Meter Reset Knob.  Made of black rubber-KN 10 1967 Buick Electra Trip Meter Reset Knob. Made of black rubber-KN 10Trip Meter Reset Knob. Made of black rubber. Compare to measurements: 1/8" I.D., 7/16" O.D. X 1/2" tall. Each

1967 Buick Electra Front Molded Door Seals with Clips.  For 4-Door Sedan Only-LM 21-F 1967 Buick Electra Front Molded Door Seals with Clips. For 4-Door Sedan Only-LM 21-FFront Molded Door Seals with Clips. For 4-Door Sedan Only. Pair R&L

1967 Buick Electra Rear Molded Door Seals with Clips.  For 4-Door Sedan Only-LM 21-F/R 1967 Buick Electra Rear Molded Door Seals with Clips. For 4-Door Sedan Only-LM 21-F/RRear Molded Door Seals with Clips. For 4-Door Sedan Only. Pair R&L

1967 Buick Electra Front door seals-LM 21-J 1967 Buick Electra Front door seals-LM 21-JFront door seals. Fits '65-'66 GM B- and C-body 4-door hardtop (also called 'Sports Sedan') models. Replaces OEM#'s 4455994/5. Pair. R&L.

1967 Buick Electra Trunk Liner.  Loose weave-M 23 1967 Buick Electra Trunk Liner. Loose weave-M 23Trunk Liner. Loose weave. Black with scattered white threads. 54" wide. Sold by the foot


1967 Buick Electra Brake Master Cylinder Cover Seal.  Replaces OEM #5470861-RP 2-E 1967 Buick Electra Brake Master Cylinder Cover Seal. Replaces OEM #5470861-RP 2-EBrake Master Cylinder Cover Seal. Replaces OEM #5470861. 5" X 2-1/2". Each



1967 Buick Electra Clutch Arm Fork Boot.  Fits on bell housing to keep dirt out-RP 31-D 1967 Buick Electra Clutch Arm Fork Boot. Fits on bell housing to keep dirt out-RP 31-DClutch Arm Fork Boot. Fits on bell housing to keep dirt out. Each

1967 Buick Electra Positive Crankcase Ventilation Grommet-RP 9 1967 Buick Electra Positive Crankcase Ventilation Grommet-RP 9Positive Crankcase Ventilation Grommet. 11/16" wide X 1-5/8" long, with 15/16" I.D. (Fits some models) Each

1967 Buick Electra ConvertibleTop Roof Rail Seals-RR 1811 1967 Buick Electra ConvertibleTop Roof Rail Seals-RR 1811ConvertibleTop Roof Rail Seals. 6-Piece set, made with steel cores.

1967 Buick Electra Roof Rail Seals, 67 to 68 GM C Body 2 Door Hardtop Except Cadillacs-RR 5015-C 1967 Buick Electra Roof Rail Seals, 67 to 68 GM C Body 2 Door Hardtop Except Cadillacs-RR 5015-CThis part fits into the area that goes up the A pillar, across the top of the window and passes by the B pillar. It seals the side windows when they are rolled up.

1967 Buick Electra Trunk Bumper.  Fits lower corner on decklid.  15/16 O.D-SB 34 1967 Buick Electra Trunk Bumper. Fits lower corner on decklid. 15/16" O.D-SB 34Trunk Bumper. Fits lower corner on decklid. 15/16" O.D., 11/16" high. Each

1967 Buick Electra Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35 1967 Buick Electra Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35Door Bumper, 57-74 GM Cars, made with twin retainers, Each. Measure 1-1/16" high X 19/32" wide X 1-1/32" long.

1967 Buick Electra Seat Bumper.  Made with steel core like original-SB 62-A 1967 Buick Electra Seat Bumper. Made with steel core like original-SB 62-ASeat Bumper. Made with steel core like original. 1-1/2" long, 7/16" thick. Two used per car. Each

1967 Buick Electra Clutch Pedal Return Bumper-SB 64 1967 Buick Electra Clutch Pedal Return Bumper-SB 64Clutch Pedal Return Bumper. 1-13/16" long X 13/16" wide X 7/8" high (center). Each

1967 Buick Electra Glove Box and Fuel Door Bumper.  Fits 3/16 hole.  Each-SB 78 1967 Buick Electra Glove Box and Fuel Door Bumper. Fits 3/16" hole. Each-SB 78Glove Box and Fuel Door Bumper. Fits 3/16" hole. Each



1967 Buick Electra Dash and Firewall Grommet.  Single-hole type is for one wire-SM 101 1967 Buick Electra Dash and Firewall Grommet. Single-hole type is for one wire-SM 101Dash and Firewall Grommet. Single-hole type is for one wire. Each


1967 Buick Electra Rocker Arm Cover.  Neoprene plug.  Fits 1 hole.  Each-SM 66 1967 Buick Electra Rocker Arm Cover. Neoprene plug. Fits 1" hole. Each-SM 66Rocker Arm Cover. Neoprene plug. Fits 1" hole. Each

1967 Buick Electra Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-A 1967 Buick Electra Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-AFirewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L. Replaces OEM#'s (GM) 7642589 and (AMC) 4001934. Black. Each.


1967 Buick Electra Unbeaded Door and Trunk Lock Gasket.  1-3/16 O.D., 7/8 I.D-UM 1600-100 1967 Buick Electra Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D-UM 1600-100Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D. Each

1967 Buick Electra Rear Side Roll-Up Window Seal, for Hardtops and Convertibles-VS 3 1967 Buick Electra Rear Side Roll-Up Window Seal, for Hardtops and Convertibles-VS 3Rear Side Roll-Up Window Seal, for Hardtops and Convertibles. Two 20" sections slide into metal track. No steel insert. Pair

1967 Buick Electra Rear Roll-Up Quarter Window Seals-VS 3-R 1967 Buick Electra Rear Roll-Up Quarter Window Seals-VS 3-RRear Roll-Up Quarter Window Seals, for 2-Door Hardtops and Convertibles. Pair

1967 Buick Electra Quarter Window Reveal Molding Clip.  Made of Steel-WF 205 1967 Buick Electra Quarter Window Reveal Molding Clip. Made of Steel-WF 205Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8" X 11/16". Each

1967 Buick Electra Vent window and rear division channel seals-WR 2002-E 1967 Buick Electra Vent window and rear division channel seals-WR 2002-EVent window and rear division channel seals. Fits '65-'68 GM B-body and C-body 2-door and 4-door hardtops and convertibles. Top quality EPDM dense rubber. 4-piece set. R&L.

Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help