×
close
1967 Buick Lesabre Catalog and Classic Car Guide, Ratings and Features

Image of 1967 Buick Lesabre, sourced from www.connorsmotorcar.com , Image Link.

Performance Metrics

Performance: +60
Handling: +55
Ride Comfort: +70

Fundamental Metrics

Safety: +40
Maintenance and Upkeep: +65
Restoration Difficulty: +70

Emotional Appeal

Looks: +75
Collectability: +60
Historical Significance: +50

MMP Rating

6.4 /10
Engine Specifications
Engine: 250 cu in (4.1 L) I6, 300 cu in (4.9 L) V8, 340 cu in (5.6 L) V8, 400 cu in (6.6 L) V8
Displacement: 4.1 - 6.6 L
Horsepower: 155 - 360 hp
Torque: 235 - 475 lb-ft
Compression Ratio: 8.5:1 - 10.25:1
Ignition System: Conventional breaker-point ignition system
Cooling System: Liquid-cooled
Performance Specifications
0-60 Time: 8 - 10 seconds
1/4 Mile Time: 16 - 18 seconds
Top Speed: 115 - 130 mph
Transmission and Drive
Drive Type: Rear-wheel drive
Transmission Type: 3-speed manual, 4-speed manual, 3-speed automatic
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: 10 - 15 mpg
Dimensions and Brakes
Brakes: Front disc brakes and rear drum brakes
Wheelbase: 119 inches
Weight: 3,600 - 4,000 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

1967 Buick LeSabre: A Testament to American Automotive Excellence

The 1967 Buick LeSabre stands as a proud testament to the era of American automotive innovation, a time when cars were not just modes of transportation but symbols of status and style. Born from the assembly lines of General Motors, the LeSabre was a vehicle that epitomized the luxury and grandeur of its manufacturer. With its sleek lines and robust presence, this iconic car captured the essence of 1960s America—a period marked by cultural shifts and technological advancements. Among its many accolades, the LeSabre is remembered for introducing a new level of sophistication to the full-size sedan market.

Design and Innovation

The exterior styling of the 1967 Buick LeSabre was a harmonious blend of elegance and muscle. Its long hood and short rear deck profile exuded a sense of forward motion even at a standstill, while the sculpted bodywork reflected light in a way that emphasized its curves and contours. Inside, passengers were greeted with an interior that showcased Buick's commitment to comfort and luxury. High-quality materials such as rich vinyl or optional leather adorned the seats, with woodgrain accents providing a touch of class to the dashboard and steering wheel.

For its time, the LeSabre was at the forefront of automotive technology, featuring innovations such as an available Super Turbine automatic transmission and advanced safety features like energy-absorbing steering columns. Color options ranged from deep hues like "Plum Mist" to vibrant "Arctic White," with "Riviera Red" being among the popular choices. The LeSabre came in various body styles including sedans, coupes, convertibles, and even station wagons—with the sleek two-door hardtop coupe often stealing the spotlight.

Historical Significance

The 1967 Buick LeSabre's impact on automotive design was profound. It helped set new standards for full-size American luxury sedans with its combination of style, power, and innovation. The car's distinctive design language influenced not only subsequent Buick models but also resonated across other GM marques and beyond. Its legacy is evident in how it balanced traditional luxury with an emerging sense of sportiness—a formula that many manufacturers would strive to replicate.

Performance and Handling

Underneath its hood, the 1967 LeSabre housed a robust V8 engine that propelled it to impressive speeds for its class. While top speed figures hovered around 120 mph, it was the smooth acceleration and torque-rich performance that left an impression on drivers. On winding roads or over bumps, the LeSabre maintained composure thanks to its well-tuned suspension system. Driving this car was an experience characterized by the throaty rumble of its engine, a comfortable ride quality, and responsive handling that connected driver to road.

Ownership Experience

The 1967 Buick LeSabre found its place in various roles—from being a reliable daily driver to gracing car shows as a cherished classic. Maintenance was straightforward for the era's mechanics, making it a practical choice for those who valued reliability alongside luxury. While some criticized its fuel consumption in light of smaller European imports, owners reveled in its dependability and commanding road presence.

Fun Facts

This model year saw some interesting trivia: rare editions like the California GS package offered higher performance while maintaining luxury features. Celebrity ownerships added to its allure; notable figures in music and film were often seen behind the wheel of a LeSabre. Although not known for breaking speed records, it did set sales records for Buick at the time.

Collector's Information

Today, collectors value the 1967 Buick LeSabre for its beauty and historical significance. With production numbers estimated in tens of thousands across all body styles, finding one in pristine condition can be challenging but rewarding. Values range widely based on condition and originality—anywhere from $10,000 for a well-maintained example to upwards of $30,000 or more for showroom-quality specimens. The market trend shows appreciation for well-preserved or expertly restored models.

Conclusion

The 1967 Buick LeSabre is more than just a classic car; it is a piece of American history on wheels. Its blend of design elegance, technological innovation, and robust performance encapsulates an era when cars were crafted with passion and pride. For enthusiasts and collectors alike, owning a '67 LeSabre is not just about possessing an automobile—it's about preserving a legacy that continues to captivate hearts across generations.

1967 Buick Lesabre Catalog of Parts

1967 Buick LeSabre Door lock pillar seals-ALP 5051 1967 Buick LeSabre Door lock pillar seals-ALP 5051Door lock pillar seals. Fits '67-'68 GM B- and C-body 2 hardtop coupe (sometimes referred to as Sport Coupe or Fastback) models. Includes '67-'68 Impala, and '67 Impala SS, LeSabre, LeSabre Custom and Wildcat Custom and '67 Calais and Deville. (see ALP 5053 for other '67-'68 GM B- and C-body 2 hardtop models not listed here).

1967 Buick LeSabre Upper door-lock pillar seal. 2-door hardtop and convertible-ALP 5053 1967 Buick LeSabre Upper door-lock pillar seal. 2-door hardtop and convertible-ALP 5053Upper door-lock pillar seal. 2-door hardtop and convertible. Does not fit Fastback models. Made with all details and galvanized steel cores. 2-3/16 in. W x 4-11/16 in. L. Pair. R&L.

1967 Buick LeSabre Shock Absorber Grommet.  1 bottom O.D., 3/4 high-BN 1 1967 Buick LeSabre Shock Absorber Grommet. 1" bottom O.D., 3/4" high-BN 1Shock Absorber Grommet. 1" bottom O.D., 3/4" high., with 7/16" I.D. Each

1967 Buick LeSabre Front coil-spring insulator-BN 110 1967 Buick LeSabre Front coil-spring insulator-BN 110Front coil-spring insulator. Fits '41-'60 Oldsmobile and '50-'83 GM passenger models. 5-3/8 in. OD x 3-3/4 in. ID x 3/4 in. high with 13/16 in. wide bottom flange 1/4" thick, 12 flutes. Each.

1967 Buick LeSabre Front Stabilizer End Repair Kit-BNK 23 1967 Buick LeSabre Front Stabilizer End Repair Kit-BNK 23Front Stabilizer End Repair Kit. 22-piece set for two stabilizer bars. Contains all rubber bushings, washers, bolts and nuts, enough for one front end. Set

1967 Buick LeSabre Butyl Glass Setting Tape-BT 1 1967 Buick LeSabre Butyl Glass Setting Tape-BT 1Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16" wide X 15' long. Each

1967 Buick LeSabre Convertible Top Windshield Header Seal-C/LP 40-G 1967 Buick LeSabre Convertible Top Windshield Header Seal-C/LP 40-GConvertible Top Windshield Header Seal. Clips installed every 3-5/8". Made of soft, black, skin-covered sponge. Sold by the foot.

1967 Buick LeSabre Clutch and Brake Pedal Pads.  Exact reproduction-CB 99 1967 Buick LeSabre Clutch and Brake Pedal Pads. Exact reproduction-CB 99Clutch and Brake Pedal Pads. Exact reproduction. 3-1/2" wide. Pair




1967 Buick LeSabre Pillar Post Seals, 66-68 GM B  C Body Convertibles, Pair-CZ 8100-A 1967 Buick LeSabre Pillar Post Seals, 66-68 GM B & C Body Convertibles, Pair-CZ 8100-APillar Post Seals, 66-68 GM B & C Body Convertibles. Replaces OEM #'s 7602728 & 7602729. Also known as hinge pillar weatherstrips, this part can be found between the A-pillar post and the front door on convertible models. Our part has embedded cores surrounding the main mounting holes for extra strength when installing with original hardware.

1967 Buick LeSabre Top Bow to Header Seal (fits late '66-'70 GM B body-HD 731 1967 Buick LeSabre Top Bow to Header Seal (fits late '66-'70 GM "B" body-HD 731Top Bow to Header Seal (fits late '66-'70 GM "B" body, '65-'70 GM "C" body). Made of smooth, skin-covered sponge, with steel core and molded ends, like original. 56-1/2" Long. Each

1967 Buick LeSabre Hood to Fender Bumper.  Fits B Body Buicks 3/4 HOLE, 1-1/16 HIGH X 3/4 WIDE-HF 26-A 1967 Buick LeSabre Hood to Fender Bumper. Fits B Body Buicks 3/4"" HOLE, 1-1/16"" HIGH X 3/4 WIDE-HF 26-AHood to Fender Bumper. Fits B Body Buicks 3/4"" HOLE, 1-1/16"" HIGH X 3/4 WIDE

1967 Buick LeSabre Trip Meter Reset Knob.  Made of black rubber-KN 10 1967 Buick LeSabre Trip Meter Reset Knob. Made of black rubber-KN 10Trip Meter Reset Knob. Made of black rubber. Compare to measurements: 1/8" I.D., 7/16" O.D. X 1/2" tall. Each

1967 Buick LeSabre Front Molded Door Seals with Clips.  For 4-Door Sedan Only-LM 21-F 1967 Buick LeSabre Front Molded Door Seals with Clips. For 4-Door Sedan Only-LM 21-FFront Molded Door Seals with Clips. For 4-Door Sedan Only. Pair R&L

1967 Buick LeSabre Rear Molded Door Seals with Clips.  For 4-Door Sedan Only-LM 21-F/R 1967 Buick LeSabre Rear Molded Door Seals with Clips. For 4-Door Sedan Only-LM 21-F/RRear Molded Door Seals with Clips. For 4-Door Sedan Only. Pair R&L

1967 Buick LeSabre Molded Door Seals-LM 21-I 1967 Buick LeSabre Molded Door Seals-LM 21-IMolded Door Seals. For 2-Door Hardtop and Convertibles (does not fit Grand Prix hardtop or formal top cars). Pair R&L. Original part numbers #7648132 and 7648133.

1967 Buick LeSabre Front door seals-LM 21-J 1967 Buick LeSabre Front door seals-LM 21-JFront door seals. Fits '65-'66 GM B- and C-body 4-door hardtop (also called 'Sports Sedan') models. Replaces OEM#'s 4455994/5. Pair. R&L.

1967 Buick LeSabre Trunk Liner.  Loose weave-M 23 1967 Buick LeSabre Trunk Liner. Loose weave-M 23Trunk Liner. Loose weave. Black with scattered white threads. 54" wide. Sold by the foot


1967 Buick LeSabre Basic Kit, for 2-Door Hardtop-RKB 2007-100 1967 Buick LeSabre Basic Kit, for 2-Door Hardtop-RKB 2007-100Basic Kit, for 2-Door Hardtop. Door (LM 21-I) Roof Rail (RR 5015) Trunk (TK 46-18), Seals. (Does not fit Fastback)

1967 Buick LeSabre Basic Kit, for Convertibles-RKB 2007-101 1967 Buick LeSabre Basic Kit, for Convertibles-RKB 2007-101Basic Kit, for Convertibles. Door (LM 21-I) Roof Rail (RR 1811-B), Header (HD 731), Trunk (TK 46-18), Seals.

1967 Buick LeSabre Brake Master Cylinder Cover Seal.  Replaces OEM #5470861-RP 2-E 1967 Buick LeSabre Brake Master Cylinder Cover Seal. Replaces OEM #5470861-RP 2-EBrake Master Cylinder Cover Seal. Replaces OEM #5470861. 5" X 2-1/2". Each



1967 Buick LeSabre Clutch Arm Fork Boot.  Fits on bell housing to keep dirt out-RP 31-D 1967 Buick LeSabre Clutch Arm Fork Boot. Fits on bell housing to keep dirt out-RP 31-DClutch Arm Fork Boot. Fits on bell housing to keep dirt out. Each

1967 Buick LeSabre Positive Crankcase Ventilation Grommet-RP 9 1967 Buick LeSabre Positive Crankcase Ventilation Grommet-RP 9Positive Crankcase Ventilation Grommet. 11/16" wide X 1-5/8" long, with 15/16" I.D. (Fits some models) Each

1967 Buick LeSabre Molded Roof Rail Seals, for Convertibles-RR 1811-B 1967 Buick LeSabre Molded Roof Rail Seals, for Convertibles-RR 1811-BMolded Roof Rail Seals, for Convertibles. 6-Piece set, with steel cores (remove rear flaps for '69-'70 Chevrolet). For molded sponge header seal, order part #HD 731.

1967 Buick LeSabre Molded roof-rail seals-RR 5015 1967 Buick LeSabre Molded roof-rail seals-RR 5015Molded roof-rail seals. For 2-door hardtops only (does not fit Fastback). 68 in. long. Please check your old seal to ensure proper ordering. Pair. R&L.

1967 Buick LeSabre Molded roof-rail seals-RR 5015-A 1967 Buick LeSabre Molded roof-rail seals-RR 5015-AMolded roof-rail seals. For 2-door Fastback models only (does not fit standard hardtop). 96 in. long. Please check your old seal to ensure proper ordering. Pair. R&L.


1967 Buick LeSabre Trunk Bumper.  Fits lower corner on decklid.  15/16 O.D-SB 34 1967 Buick LeSabre Trunk Bumper. Fits lower corner on decklid. 15/16" O.D-SB 34Trunk Bumper. Fits lower corner on decklid. 15/16" O.D., 11/16" high. Each

1967 Buick LeSabre Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35 1967 Buick LeSabre Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35Door Bumper, 57-74 GM Cars, made with twin retainers, Each. Measure 1-1/16" high X 19/32" wide X 1-1/32" long.

1967 Buick LeSabre Seat Bumper.  Made with steel core like original-SB 62-A 1967 Buick LeSabre Seat Bumper. Made with steel core like original-SB 62-ASeat Bumper. Made with steel core like original. 1-1/2" long, 7/16" thick. Two used per car. Each

1967 Buick LeSabre Clutch Pedal Return Bumper-SB 64 1967 Buick LeSabre Clutch Pedal Return Bumper-SB 64Clutch Pedal Return Bumper. 1-13/16" long X 13/16" wide X 7/8" high (center). Each

1967 Buick LeSabre Bumper Brace to Filler Panel Spacer, 68-71 Chevy A Body, 67-71 GM B Body Exc Wgn-SB 68 1967 Buick LeSabre Bumper Brace to Filler Panel Spacer, 68-71 Chevy A Body, 67-71 GM B Body Exc Wgn-SB 68Bumper Brace to Filler Panel Spacer, 68-71 Chevy A Body Except Wagons, 67-71 GM B Body Except Wagons, Each. Replaces OEM # 3895100.

1967 Buick LeSabre Glove Box and Fuel Door Bumper.  Fits 3/16 hole.  Each-SB 78 1967 Buick LeSabre Glove Box and Fuel Door Bumper. Fits 3/16" hole. Each-SB 78Glove Box and Fuel Door Bumper. Fits 3/16" hole. Each



1967 Buick LeSabre Dash and Firewall Grommet.  Single-hole type is for one wire-SM 101 1967 Buick LeSabre Dash and Firewall Grommet. Single-hole type is for one wire-SM 101Dash and Firewall Grommet. Single-hole type is for one wire. Each


1967 Buick LeSabre Rocker Arm Cover.  Neoprene plug.  Fits 1 hole.  Each-SM 66 1967 Buick LeSabre Rocker Arm Cover. Neoprene plug. Fits 1" hole. Each-SM 66Rocker Arm Cover. Neoprene plug. Fits 1" hole. Each

1967 Buick LeSabre Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-A 1967 Buick LeSabre Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-AFirewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L. Replaces OEM#'s (GM) 7642589 and (AMC) 4001934. Black. Each.


1967 Buick LeSabre Unbeaded Door and Trunk Lock Gasket.  1-3/16 O.D., 7/8 I.D-UM 1600-100 1967 Buick LeSabre Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D-UM 1600-100Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D. Each

1967 Buick LeSabre Rear Side Roll-Up Window Seal, for Hardtops and Convertibles-VS 3 1967 Buick LeSabre Rear Side Roll-Up Window Seal, for Hardtops and Convertibles-VS 3Rear Side Roll-Up Window Seal, for Hardtops and Convertibles. Two 20" sections slide into metal track. No steel insert. Pair

1967 Buick LeSabre Rear Roll-Up Quarter Window Seals-VS 3-R 1967 Buick LeSabre Rear Roll-Up Quarter Window Seals-VS 3-RRear Roll-Up Quarter Window Seals, for 2-Door Hardtops and Convertibles. Pair

1967 Buick LeSabre Quarter Window Reveal Molding Clip.  Made of Steel-WF 205 1967 Buick LeSabre Quarter Window Reveal Molding Clip. Made of Steel-WF 205Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8" X 11/16". Each

1967 Buick LeSabre Vent window and rear division channel seals-WR 2002-E 1967 Buick LeSabre Vent window and rear division channel seals-WR 2002-EVent window and rear division channel seals. Fits '65-'68 GM B-body and C-body 2-door and 4-door hardtops and convertibles. Top quality EPDM dense rubber. 4-piece set. R&L.

Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help