×
close
1975 Buick Regal Catalog and Classic Car Guide, Ratings and Features

Image of 1975 Buick Regal, sourced from www.legendarymotorsllc.com , Image Link.

Performance Metrics

Performance: +45
Handling: +40
Ride Comfort: +70

Fundamental Metrics

Safety: +50
Maintenance and Upkeep: +65
Restoration Difficulty: +75

Emotional Appeal

Looks: +60
Collectability: +55
Historical Significance: +30

MMP Rating

5.5 /10
Engine Specifications
Engine: 350 cu in (5.7 L) V8, 455 cu in (7.5 L) V8
Displacement: 350-455 cu in
Horsepower: 155-225 hp
Torque: 275-375 lb-ft
Compression Ratio: 8.5:1
Ignition System: Electronic Ignition System
Cooling System: Liquid-cooled
Performance Specifications
0-60 Time: Estimated 8-10 seconds
1/4 Mile Time: Estimated 16-18 seconds
Top Speed: 115-120 mph
Transmission and Drive
Drive Type: Rear-wheel drive
Transmission Type: 3-speed automatic, 4-speed manual
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: Estimated 12-15 mpg
Dimensions and Brakes
Brakes: Front disc, rear drum
Wheelbase: 112.0 in
Weight: 3,600-3,800 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

1975 Buick Regal: A Touchstone of American Automotive Elegance

The 1975 Buick Regal stands as a testament to a bygone era of automotive design, where luxury and size went hand-in-hand with the American dream. Born from the stables of General Motors, this mid-size sedan was crafted at a time when the oil crisis had automakers scrambling to balance efficiency with the opulence drivers had come to expect. The Regal's introduction marked Buick's commitment to offering upscale vehicles that were both accessible and desirable. A unique fact that car enthusiasts might find fascinating is that the '75 Regal was among the first cars to offer an optional airbag, a safety feature that would only become standard many years later.

Design and Innovation

The 1975 Buick Regal boasted a distinctive exterior with sweeping lines, a long hood, and a short rear deck, which were hallmarks of its era's styling cues. The chrome-accented grille and round headlamps exuded a classic charm that was both commanding and elegant. Inside, passengers were greeted with plush seating and an array of wood-grain accents that adorned the dashboard and door panels, reflecting a touch of sophistication. The quality of materials used in the interior spoke volumes about Buick's dedication to comfort and luxury.

Technologically, the Regal featured innovations such as an optional Max Trac traction control system, which was quite advanced for its time. Color options ranged from deep hues like "Burgundy Mist" to lighter tones like "Sky Blue," with "Classic White" being a popular choice among buyers. The most iconic body style was undoubtedly the two-door coupe, which captured the essence of personal luxury during the mid-70s.

Historical Significance

The 1975 Buick Regal's impact on automotive design was subtle yet significant. It helped bridge the gap between full-sized opulence and the need for more economical vehicles. What set this car apart was its blend of luxury features with a smaller, more efficient footprint compared to its predecessors. This model laid groundwork for future generations of personal luxury cars.

Performance and Handling

Underneath its hood, the '75 Regal could be equipped with engines ranging from a modest 231 cubic inch V6 to a robust 455 cubic inch V8. While top speeds and acceleration varied depending on the powertrain, drivers could expect a zero-to-sixty time in the neighborhood of 10 seconds with the larger engines. On the road, the Regal offered a smooth ride thanks to its coil spring suspension; however, it was not without its share of body roll when tackling sharp turns or windy roads. The driving experience was characterized by a quiet cabin and an engine that hummed with American might.

Ownership Experience

The 1975 Buick Regal found its place as both a daily driver for those who appreciated a touch of class in their commute and as a show car for enthusiasts looking to showcase an era-specific gem. Maintenance was relatively straightforward for the mechanically inclined owner, but some parts may now be harder to find due to age. Reliability was generally good for well-maintained examples.

Fun Facts

Among trivia-worthy notes is that certain '75 Regals came equipped with GM's High Energy Ignition (HEI) system, which offered improved performance over traditional points ignition systems. While not known for breaking speed records, this model did set sales records for Buick at the time. Criticisms often centered around fuel economy—a common theme for vehicles of this period.

Collector's Information

In today's market, well-preserved 1975 Buick Regals can fetch anywhere from $5,000 to $20,000 depending on condition, originality, and options. Production numbers were substantial but finding one in mint condition can be challenging due to age-related wear and attrition rates. Price trends suggest that values are slowly appreciating as interest in 70s-era classics continues to grow.

Conclusion

The 1975 Buick Regal remains an emblematic figure in American automotive history—a symbol of transition from excess to efficiency without losing sight of luxury. It stands as a reminder of when cars were not just modes of transportation but statements of personal style and preference. Whether you're behind the wheel or admiring from afar, this classic continues to captivate hearts and imaginations alike.

1975 Buick Regal Catalog of Parts

1975 Buick Regal Shock Absorber Grommet.  1 bottom O.D., 3/4 high-BN 1 1975 Buick Regal Shock Absorber Grommet. 1" bottom O.D., 3/4" high-BN 1Shock Absorber Grommet. 1" bottom O.D., 3/4" high., with 7/16" I.D. Each

1975 Buick Regal Front coil-spring insulator-BN 110 1975 Buick Regal Front coil-spring insulator-BN 110Front coil-spring insulator. Fits '41-'60 Oldsmobile and '50-'83 GM passenger models. 5-3/8 in. OD x 3-3/4 in. ID x 3/4 in. high with 13/16 in. wide bottom flange 1/4" thick, 12 flutes. Each.

1975 Buick Regal Door Side Seal-C/LP 40-K 1975 Buick Regal Door Side Seal-C/LP 40-KDoor Side Seal. Made of smooth skin sponge extrusion, with clips installed. (For seal without clips, see LP 40-K) Sold by the foot.

1975 Buick Regal Molded Door Seals with Clips.  For 2-door hardtops-LM 12-Y 1975 Buick Regal Molded Door Seals with Clips. For 2-door hardtops-LM 12-YMolded Door Seals with Clips. For 2-door hardtops. Replaces OEM #9870752/3. Each is 95-1/4" long. Pair R&L

1975 Buick Regal Front Molded Door Seals with Clips.  For 4-door hardtops-LM 12-Z 1975 Buick Regal Front Molded Door Seals with Clips. For 4-door hardtops-LM 12-ZFront Molded Door Seals with Clips. For 4-door hardtops. Replaces OEM #9870656/7. Pair R&L

1975 Buick Regal Trunk Liner.  Loose weave, jet black.  50 wide-M 30 1975 Buick Regal Trunk Liner. Loose weave, jet black. 50" wide-M 30Trunk Liner. Loose weave, jet black. 50" wide. Sold by the foot

1975 Buick Regal Basic kit-RKB 2003-115 1975 Buick Regal Basic kit-RKB 2003-115Basic kit. '73-'76 GM A-body Colonade, Formal, and Sport Coupe (Body Style 57 only). Includes Buick Century Luxus Colonade Coupe, Buick Centurion Sport Coupe, Buick Regal Formal Coupe, Buick LeSabre Sport Coupe and Custom Sport Coupe. Oldsmobile Cutlass Supreme and Supreme Salon Coupes. Doors (LM 12-Y), roof-rails (RR 5019-G), and trunk (TK 46-E/16) seals. 5-piece kit.

1975 Buick Regal Brake Master Cylinder Cover Seal.  Replaces OEM #5470861-RP 2-E 1975 Buick Regal Brake Master Cylinder Cover Seal. Replaces OEM #5470861-RP 2-EBrake Master Cylinder Cover Seal. Replaces OEM #5470861. 5" X 2-1/2". Each

1975 Buick Regal Oil Filler Hole Cap.  Made of rubber-RP 8 1975 Buick Regal Oil Filler Hole Cap. Made of rubber-RP 8Oil Filler Hole Cap. Made of rubber. Fits a 1-3/16" to 1-1/4" hole. Each

1975 Buick Regal Molded roof-rail seals. 2-door hardtop-RR 5019-G 1975 Buick Regal Molded roof-rail seals. 2-door hardtop-RR 5019-GMolded roof-rail seals. 2-door hardtop. Fits '73-'76 GM A-body Colonade, Formal and Sport Coupe (Body Style 57 only). (Ex: Buick Century Luxus Colonade Coupe, Centurion Sport Coupe, Regal Formal Coupe, LeSabre Sport Coupe, LeSabre Custom Sport Coupe.) Replaces OEM#'s 9629700/01. Pair. R&L.

1975 Buick Regal Rear roof rail seals, ’73-‘77 GM body 4 door hardtop models-RR 5019-R 1975 Buick Regal Rear roof rail seals, ’73-‘77 GM body 4 door hardtop models-RR 5019-RRear roof rail seals, '73-'77 GM body 4 door hardtop models, pair. Replaces OEM #'s 9878794/9878795


1975 Buick Regal Unbeaded Door and Trunk Lock Gasket.  1-3/16 O.D., 7/8 I.D-UM 1600-100 1975 Buick Regal Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D-UM 1600-100Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D. Each

1975 Buick Regal Rear Quarter Window Molding Clip.  Made of steel-WF 204 1975 Buick Regal Rear Quarter Window Molding Clip. Made of steel-WF 204Rear Quarter Window Molding Clip. Made of steel. 3/4" x 1-3/8". Each

1975 Buick Regal Quarter Window Reveal Molding Clip.  Made of Steel-WF 205 1975 Buick Regal Quarter Window Reveal Molding Clip. Made of Steel-WF 205Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8" X 11/16". Each

1975 Buick Regal Windshield Reveal Molding Clip.  Made of steel.  13/16 x 1-WF 209 1975 Buick Regal Windshield Reveal Molding Clip. Made of steel. 13/16" x 1"-WF 209Windshield Reveal Molding Clip. Made of steel. 13/16" x 1". Each

1975 Buick Regal Rear Windshield Reveal Molding Clip.  Made of steel-WF 211 1975 Buick Regal Rear Windshield Reveal Molding Clip. Made of steel-WF 211Rear Windshield Reveal Molding Clip. Made of steel. 15/16" X 3/4". Each

1975 Buick Regal Lower Side Window Reveal Molding Clip.  Made of nylon-WF 214 1975 Buick Regal Lower Side Window Reveal Molding Clip. Made of nylon-WF 214Lower Side Window Reveal Molding Clip. Made of nylon. 1-1/4" x 3/4". Each

1975 Buick Regal Windshield Reveal Molding Clip.  Made of steel-WF 223 1975 Buick Regal Windshield Reveal Molding Clip. Made of steel-WF 223Windshield Reveal Molding Clip. Made of steel. 1/1/8" X 3/4". Each

1975 Buick Regal Windshield Reveal Molding Clip.  Made of steel-WF 224 1975 Buick Regal Windshield Reveal Molding Clip. Made of steel-WF 224Windshield Reveal Molding Clip. Made of steel. 1-1/4" X 3/4". Fits many models. Each

Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help