×
close
1964 Cadillac Series 75 Fleetwood Catalog and Classic Car Guide, Ratings and Features

Image of 1964 Cadillac Series 75 Fleetwood, sourced from www.vintagecarcollector.com , Image Link.

Performance Metrics

Performance: +45
Handling: +35
Ride Comfort: +80

Fundamental Metrics

Safety: +40
Maintenance and Upkeep: +60
Restoration Difficulty: +50

Emotional Appeal

Looks: +75
Collectability: +70
Historical Significance: +60

MMP Rating

6.4 /10
Engine Specifications
Engine: 429 CID V8
Displacement: 429 cubic inches (7.0 liters)
Horsepower: 340 hp
Torque: 480 lb-ft
Compression Ratio: 10.5:1
Ignition System: Conventional breaker-point ignition system
Cooling System: Liquid-cooled
Performance Specifications
0-60 Time: 10 seconds
1/4 Mile Time: 17 seconds
Top Speed: 120 mph
Transmission and Drive
Drive Type: Rear-wheel drive
Transmission Type: 3-speed automatic
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: 10-12 mpg
Dimensions and Brakes
Brakes: Power-assisted drum brakes
Wheelbase: 149.8 inches
Weight: 5,000 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

1964 Cadillac Series 75 Fleetwood: A Testament to Luxury and Prestige

The 1964 Cadillac Series 75 Fleetwood stands as a towering achievement in the realm of luxury automobiles. Crafted by the esteemed Cadillac division of General Motors, this vehicle not only encapsulated the pinnacle of opulence but also reflected the grandeur of its era. In a time when America was riding the crest of post-war prosperity, the Series 75 Fleetwood emerged as a symbol of success and status. A unique fact that car enthusiasts may find fascinating is that this model was often the choice for limousines and hearses, serving dignitaries and celebrities alike.

Design and Innovation

The exterior of the 1964 Cadillac Series 75 Fleetwood was a harmonious blend of sleek lines and imposing presence. Its long, elegant silhouette was accentuated by the distinctive tail fins—a design cue that had become more subdued compared to earlier models, yet still conveyed a sense of motion and sophistication. The interior was a sanctuary of comfort, with sumptuous leather seats and rich wood accents that spoke volumes about the quality of materials used. Technological features such as automatic climate control were groundbreaking for the time, ensuring a ride in supreme comfort.

Color options ranged from stately blacks and silvers to more vibrant hues, with popular choices often reflecting personal style and taste. The Series 75 Fleetwood was available in various body styles, including an eight-passenger sedan and limousine, with the latter being particularly iconic due to its extended wheelbase and luxurious appointments.

Historical Significance

The 1964 Cadillac Series 75 Fleetwood's impact on automotive design cannot be overstated. It set a benchmark for luxury vehicles with its combination of advanced features, meticulous craftsmanship, and commanding aesthetics. This car stood head and shoulders above its contemporaries in terms of prestige and became an enduring symbol of Cadillac's commitment to excellence.

Performance and Handling

Underneath its stately exterior, the Series 75 Fleetwood housed a potent 429 cubic inch V8 engine that delivered smooth yet authoritative performance. While top speed was governed more by its dignified purpose than outright sportiness, acceleration from 0-60 mph was respectable for such a sizable vehicle. Handling was surprisingly graceful for its dimensions, absorbing bumps with ease while maintaining composure on windy roads. Driving this car was about enjoying a serene glide over the asphalt while basking in the burble of its powerful engine.

Ownership Experience

The Series 75 Fleetwood was often seen gracing red carpets or parked outside high-profile events rather than being used as a daily driver. Maintenance could be demanding given its complexity and luxury features; however, reliability was commendable for such an intricate machine. The ease of repair varied depending on one's mechanical expertise but finding parts could be challenging due to its relative rarity.

Fun Facts

This Cadillac has graced many notable garages, including those owned by celebrities and heads of state. While not known for setting speed records, it held its own in terms of sales among luxury vehicles during its time. Criticisms were few but sometimes pointed towards its fuel consumption—a small price to pay for the level of grandeur it offered.

Collector's Information

Today, the 1964 Cadillac Series 75 Fleetwood is a coveted piece among collectors with values ranging significantly based on condition and provenance. Production numbers were limited due to their specialized market positioning, which adds to their rarity. Price trends have generally seen an appreciation over time as classic luxury vehicles continue to gain popularity among enthusiasts. A well-preserved example could fetch anywhere from mid-five figures up to six figures depending on various factors.

Conclusion

The 1964 Cadillac Series 75 Fleetwood is more than just a classic car; it is an artifact from an era where luxury knew no bounds—a testament to American ingenuity and elegance on wheels. Owning one today is not merely about possessing a vintage automobile; it is about stewarding a piece of history that continues to captivate and inspire.

1964 Cadillac Series 75 Fleetwood Catalog of Parts

1964 Cadillac Series 75 Fleetwood Body mount bracket pad with shoulder-BC 54 1964 Cadillac Series 75 Fleetwood Body mount bracket pad with shoulder-BC 54Body mount bracket pad with shoulder, includes steel tube mounting insert, '54-'65 Cadillac 'C' & 'D' body 2 & 4 door models except '56-'60 convertibles, each. Replace OEM #'s 1461768 & 1476996.

1964 Cadillac Series 75 Fleetwood Shock Absorber Grommet.  1 bottom O.D., 3/4 high-BN 1 1964 Cadillac Series 75 Fleetwood Shock Absorber Grommet. 1" bottom O.D., 3/4" high-BN 1Shock Absorber Grommet. 1" bottom O.D., 3/4" high., with 7/16" I.D. Each

1964 Cadillac Series 75 Fleetwood Shock Absorber Grommet.  1 bottom O.D-BN 11 1964 Cadillac Series 75 Fleetwood Shock Absorber Grommet. 1" bottom O.D-BN 11Shock Absorber Grommet. 1" bottom O.D., 3/4" high, with 5/8" I.D. Each

1964 Cadillac Series 75 Fleetwood Front coil-spring insulator-BN 110 1964 Cadillac Series 75 Fleetwood Front coil-spring insulator-BN 110Front coil-spring insulator. Fits '41-'60 Oldsmobile and '50-'83 GM passenger models. 5-3/8 in. OD x 3-3/4 in. ID x 3/4 in. high with 13/16 in. wide bottom flange 1/4" thick, 12 flutes. Each.

1964 Cadillac Series 75 Fleetwood Spring and Shackle Bushing.  1-1/8 bottom O.D-BN 17 1964 Cadillac Series 75 Fleetwood Spring and Shackle Bushing. 1-1/8" bottom O.D-BN 17Spring and Shackle Bushing. 1-1/8" bottom O.D. X 1-3/4" high, with 5/8" I.D. Each

1964 Cadillac Series 75 Fleetwood Front Stabilizer End Repair Kit-BNK 24 1964 Cadillac Series 75 Fleetwood Front Stabilizer End Repair Kit-BNK 24Front Stabilizer End Repair Kit. 22-piece set for two stabilizer bars. Contains all rubber bushings, washers, bolts and nuts, enough for one front end. Set

1964 Cadillac Series 75 Fleetwood Door Side Seal ('64-'65 some models)-C/LP 40-C 1964 Cadillac Series 75 Fleetwood Door Side Seal ('64-'65 some models)-C/LP 40-CDoor Side Seal ('64-'65 some models). Comes complete with clips already installed, 4" apart. For seal without clips, see LP 40-C. Sold by the foot.

1964 Cadillac Series 75 Fleetwood Door Side Seal ('64-'66 some models)-C/LP 40-D 1964 Cadillac Series 75 Fleetwood Door Side Seal ('64-'66 some models)-C/LP 40-DDoor Side Seal ('64-'66 some models). Smooth skin-covered sponge with clips already installed, 4" apart. For seal without clips, see LP 40-D. Sold by the foot.

1964 Cadillac Series 75 Fleetwood Hood Bumper Cap, for adjustment bolt.  Up to 5 used per car-HA 11 1964 Cadillac Series 75 Fleetwood Hood Bumper Cap, for adjustment bolt. Up to 5 used per car-HA 11Hood Bumper Cap, for adjustment bolt. Up to 5 used per car. 1-1/16" O.D., 5/8" high. Each

1964 Cadillac Series 75 Fleetwood Hood Adjustment Bolt and Bumper.  1 diameter rubber head-HA 2 1964 Cadillac Series 75 Fleetwood Hood Adjustment Bolt and Bumper. 1" diameter rubber head-HA 2Hood Adjustment Bolt and Bumper. 1" diameter rubber head. 5/16" thick X 18 threads/inch X 1-3/4" long bolt. Each

1964 Cadillac Series 75 Fleetwood Hood Adjustment Bolt and Bumper-HA 3 1964 Cadillac Series 75 Fleetwood Hood Adjustment Bolt and Bumper-HA 3Hood Adjustment Bolt and Bumper. 1-1/8" diameter rubber head. 5/16" thick X 18 threads/inch X 2-1/8" long bolt. Each

1964 Cadillac Series 75 Fleetwood Hood Bumper.  Snap in type-HF 10-A 1964 Cadillac Series 75 Fleetwood Hood Bumper. Snap in type-HF 10-AHood Bumper. Snap in type. 1-1/4" long X 3/4" wide X 3/8" high. Each

1964 Cadillac Series 75 Fleetwood Trip Meter Reset Knob.  Made of black rubber-KN 10 1964 Cadillac Series 75 Fleetwood Trip Meter Reset Knob. Made of black rubber-KN 10Trip Meter Reset Knob. Made of black rubber. Compare to measurements: 1/8" I.D., 7/16" O.D. X 1/2" tall. Each

1964 Cadillac Series 75 Fleetwood Odometer Trip Knob.  Made of black rubber-KN 11 1964 Cadillac Series 75 Fleetwood Odometer Trip Knob. Made of black rubber-KN 11Odometer Trip Knob. Made of black rubber. Compare to measurements: 1/8" I.D., 7/16" O.D. X 7/16" tall. Each

1964 Cadillac Series 75 Fleetwood Door Side Seal-LP 40-C 1964 Cadillac Series 75 Fleetwood Door Side Seal-LP 40-CDoor Side Seal, Without Clips ('64-'65 some models) For seal with clips, see C/LP 40-C. Sold by the foot

1964 Cadillac Series 75 Fleetwood Door Side Seal-LP 40-D 1964 Cadillac Series 75 Fleetwood Door Side Seal-LP 40-DDoor Side Seal, Without Clips ('64-'66 some models) For seal with clips, see C/LP 40-D. Sold by the foot

1964 Cadillac Series 75 Fleetwood Door Handle Pads.  1-1/8 wide X 2-7/8 long-MP 462 1964 Cadillac Series 75 Fleetwood Door Handle Pads. 1-1/8" wide X 2-7/8" long-MP 462Door Handle Pads. 1-1/8" wide X 2-7/8" long. 4-Piece Set R&L




1964 Cadillac Series 75 Fleetwood Wiper motor crank arm seal cap-RP 6-S 1964 Cadillac Series 75 Fleetwood Wiper motor crank arm seal cap-RP 6-SWiper motor crank arm seal cap, '59-'65 Cadillac C & D body, '61-'62 Oldsmobile B & C body models, each. Replaces OEM # 4909049.

1964 Cadillac Series 75 Fleetwood Trunk Bumper.  Fits lower corner on decklid.  15/16 O.D-SB 34 1964 Cadillac Series 75 Fleetwood Trunk Bumper. Fits lower corner on decklid. 15/16" O.D-SB 34Trunk Bumper. Fits lower corner on decklid. 15/16" O.D., 11/16" high. Each

1964 Cadillac Series 75 Fleetwood Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35 1964 Cadillac Series 75 Fleetwood Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35Door Bumper, 57-74 GM Cars, made with twin retainers, Each. Measure 1-1/16" high X 19/32" wide X 1-1/32" long.

1964 Cadillac Series 75 Fleetwood Door, Trunk and Seat Bumper-SB 62 1964 Cadillac Series 75 Fleetwood Door, Trunk and Seat Bumper-SB 62Door, Trunk and Seat Bumper. Made with steel core, like original. 7/8" Diameter X 3/8" High. Each

1964 Cadillac Series 75 Fleetwood Clutch Pedal Return Bumper-SB 64 1964 Cadillac Series 75 Fleetwood Clutch Pedal Return Bumper-SB 64Clutch Pedal Return Bumper. 1-13/16" long X 13/16" wide X 7/8" high (center). Each




1964 Cadillac Series 75 Fleetwood Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-A 1964 Cadillac Series 75 Fleetwood Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-AFirewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L. Replaces OEM#'s (GM) 7642589 and (AMC) 4001934. Black. Each.







Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help