Image of 1967 Cadillac Eldorado, Note: These illustrations use artistic license and may differ from actual historical models.
Performance Metrics
Fundamental Metrics
Emotional Appeal
MMP Rating
| Engine Specifications | |
|---|---|
| Engine: | 429 cu in (7.0 L) V8 |
| Displacement: | 429 cubic inches |
| Horsepower: | 340-375 hp |
| Torque: | 480 lb-ft |
| Compression Ratio: | 10.5:1 |
| Ignition System: | Conventional breaker-point ignition system |
| Cooling System: | Liquid-cooled |
| Performance Specifications | |
| 0-60 Time: | 8.5 seconds |
| 1/4 Mile Time: | 16 seconds |
| Top Speed: | 120 mph |
| Transmission and Drive | |
| Drive Type: | Front-wheel drive |
| Transmission Type: | 3-speed automatic |
| Fuel and Efficiency | |
| Fuel System Type: | Carburetor |
| MPG: | 10-12 mpg |
| Dimensions and Brakes | |
| Brakes: | Power-assisted drum brakes |
| Wheelbase: | 120 inches |
| Weight: | 4,600 lbs |
Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.
Unveiling the 1967 Cadillac Eldorado: A Paradigm of Luxury
The year 1967 heralded the arrival of a vehicle that would redefine American luxury and sophistication—the Cadillac Eldorado. Born from the prestigious design houses of General Motors, this front-wheel-drive marvel was a significant departure from Cadillac's traditional rear-wheel-drive offerings. Its introduction into the market was not just a new model release; it was an event that signaled a shift in automotive design philosophy. The Eldorado's unique blend of elegance, power, and innovation captivated the elite and became an icon of its era.
Design and Innovation
The exterior of the 1967 Cadillac Eldorado exuded opulence with its long, clean lines and distinctive, blade-like fenders that seemed to slice through the air with grace. The car's profile was strikingly futuristic, featuring a gently sloping rear deck and hidden headlights that contributed to its sleek appearance. Inside, passengers were enveloped in a world of luxury, with high-quality leather seats and rich wood accents adorning the cabin. The dashboard was an exercise in ergonomic design, placing all controls within easy reach of the driver.
Technologically, the Eldorado was ahead of its time. It boasted innovations such as automatic climate control and an optional stereo radio with a tape player—features that were cutting-edge for the mid-60s. Color options ranged from subtle to bold, with popular choices including Flamenco Red and Capri Aqua. While various body styles were available across the Cadillac range, the Eldorado's two-door personal luxury coupe configuration stood out as the most iconic.
Historical Significance
The 1967 Cadillac Eldorado's impact on automotive design cannot be overstated. It was one of the first American cars to successfully integrate front-wheel drive—a technology that would become more prevalent in later decades. Its self-assured styling set it apart from contemporaries and influenced future generations of luxury vehicles. The Eldorado's blend of performance, comfort, and style made it a benchmark for what a premium American car should be.
Performance and Handling
Underneath its refined exterior, the Eldorado housed a potent 429 cubic inch (7.0-liter) V8 engine that propelled it to impressive speeds for such a grand vehicle. With 340 horsepower on tap, it could achieve 0-60 mph in less than nine seconds—a remarkable feat at the time. Handling was equally impressive; despite its size, the Eldorado navigated turns with poise, thanks in part to its front-wheel-drive layout which provided excellent traction. The driving experience was one of quiet confidence; from the throaty rumble of its V8 to the smoothness of its ride, every journey felt like an occasion.
Ownership Experience
The Eldorado found favor among those seeking a daily driver with panache or a show-stopping addition to their collection. Its reliability was commendable for its day, though maintenance could be costly given its luxury status and advanced features. Nonetheless, owners found joy in its consistent performance and undeniable road presence.
Fun Facts
The 1967 Cadillac Eldorado has graced many collections, including those of celebrities like Elvis Presley. While no speed records were shattered by this grand tourer, it did set sales records for Cadillac at the time. Its appearances in films and television have cemented its place in pop culture history despite criticisms about its size during an era when fuel efficiency began to gain importance.
Collector's Information
Today's collector market values a well-preserved 1967 Cadillac Eldorado highly, with prices ranging significantly based on condition and provenance. Estimates suggest that approximately 17,930 units were produced. As for appreciation potential, well-maintained examples have seen steady increases in value over time due to their iconic status and relative rarity.
Conclusion
The 1967 Cadillac Eldorado stands as a testament to American automotive excellence—a symbol of an era when luxury ruled supreme. Its combination of bold design, innovative technology, and robust performance makes it a cherished classic among enthusiasts today. As we look back on this remarkable vehicle, we are reminded that true elegance never goes out of style.
1967 Cadillac Eldorado Catalog of Parts
1967 Cadillac Eldorado Shock Absorber Grommet. 1" bottom O.D., 3/4" high-BN 1Shock Absorber Grommet. 1" bottom O.D., 3/4" high., with 7/16" I.D. Each
1967 Cadillac Eldorado Front coil-spring insulator-BN 110Front coil-spring insulator. Fits '41-'60 Oldsmobile and '50-'83 GM passenger models. 5-3/8 in. OD x 3-3/4 in. ID x 3/4 in. high with 13/16 in. wide bottom flange 1/4" thick, 12 flutes. Each.
1967 Cadillac Eldorado Spring and Shackle Bushing. 1-1/8" bottom O.D-BN 17Spring and Shackle Bushing. 1-1/8" bottom O.D. X 1-3/4" high, with 5/8" I.D. Each
1967 Cadillac Eldorado Front Stabilizer End Repair Kit-BNK 25Front Stabilizer End Repair Kit. 22-piece set for two stabilizer bars. Contains all rubber bushings, washers, bolts and nuts, enough for one front end. Set
1967 Cadillac Eldorado Butyl Glass Setting Tape-BT 1Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16" wide X 15' long. Each
1967 Cadillac Eldorado Pillar Post Seals, 66-68 GM B & C Body Convertibles, Pair-CZ 8100-APillar Post Seals, 66-68 GM B & C Body Convertibles. Replaces OEM #'s 7602728 & 7602729. Also known as hinge pillar weatherstrips, this part can be found between the A-pillar post and the front door on convertible models. Our part has embedded cores surrounding the main mounting holes for extra strength when installing with original hardware.
1967 Cadillac Eldorado Hood Bumper Cap, for adjustment bolt. Up to 5 used per car-HA 11Hood Bumper Cap, for adjustment bolt. Up to 5 used per car. 1-1/16" O.D., 5/8" high. Each
1967 Cadillac Eldorado Hood to Fender Bumper. Each-HF 10-BHood to Fender Bumper. Each
1967 Cadillac Eldorado Trip Meter Reset Knob. Made of black rubber-KN 10Trip Meter Reset Knob. Made of black rubber. Compare to measurements: 1/8" I.D., 7/16" O.D. X 1/2" tall. Each
1967 Cadillac Eldorado Door Seals with Molded Ends-LM 12-FDoor Seals with Molded Ends. For 2-Door Hardtops and Convertibles. Replaces OEM #7779558/9. Pair
1967 Cadillac Eldorado Trunk Liner. Loose weave-M 23Trunk Liner. Loose weave. Black with scattered white threads. 54" wide. Sold by the foot
1967 Cadillac Eldorado Basic Kit, for 2-Door Hardtop-RKB 1707-102Basic Kit, for 2-Door Hardtop. Door (LM 12-F) Roof Rail (RR 5009) Trunk (TK 46-18), Seals.
1967 Cadillac Eldorado Brake Master Cylinder Cover Seal. Replaces OEM #5470861-RP 2-EBrake Master Cylinder Cover Seal. Replaces OEM #5470861. 5" X 2-1/2". Each
1967 Cadillac Eldorado Sun Visor Support Sleeve. Clear plastic. Each-RP 303-ASun Visor Support Sleeve. Clear plastic. Each
1967 Cadillac Eldorado Sun Visor Rod Rubber Grommet. 3/4" long. Gray. Each-RP 303-CSun Visor Rod Rubber Grommet. 3/4" long. Gray. Each
1967 Cadillac Eldorado Positive Crankcase Ventilation Grommet-RP 9Positive Crankcase Ventilation Grommet. 11/16" wide X 1-5/8" long, with 15/16" I.D. (Fits some models) Each
1967 Cadillac Eldorado Door Bumper. Four used per car. Each-SB 32-DDoor Bumper. Four used per car. Each
1967 Cadillac Eldorado Trunk Bumper. Fits lower corner on decklid. 15/16" O.D-SB 34Trunk Bumper. Fits lower corner on decklid. 15/16" O.D., 11/16" high. Each
1967 Cadillac Eldorado Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35Door Bumper, 57-74 GM Cars, made with twin retainers, Each. Measure 1-1/16" high X 19/32" wide X 1-1/32" long.
1967 Cadillac Eldorado Seat Bumper. Made with steel core like original-SB 62-ASeat Bumper. Made with steel core like original. 1-1/2" long, 7/16" thick. Two used per car. Each
1967 Cadillac Eldorado Clutch Pedal Return Bumper-SB 64Clutch Pedal Return Bumper. 1-13/16" long X 13/16" wide X 7/8" high (center). Each
1967 Cadillac Eldorado Glove Box and Fuel Door Bumper. Fits 3/16" hole. Each-SB 78Glove Box and Fuel Door Bumper. Fits 3/16" hole. Each
1967 Cadillac Eldorado Fuel Door Bumper. 7/8" high, 5/16" O.D. Each-SB 81Fuel Door Bumper. 7/8" high, 5/16" O.D. Each
1967 Cadillac Eldorado License Plate Bumper. Fits a 1/4" hole. Each-SB 82License Plate Bumper. Fits a 1/4" hole. Each
1967 Cadillac Eldorado Dash and Firewall Grommet. Single-hole type is for one wire-SM 101Dash and Firewall Grommet. Single-hole type is for one wire. Each
1967 Cadillac Eldorado Dash and Firewall Grommet. Two hole type. Each-SM 101-ADash and Firewall Grommet. Two hole type. Each
1967 Cadillac Eldorado Rocker Arm Cover. Neoprene plug. Fits 1" hole. Each-SM 66Rocker Arm Cover. Neoprene plug. Fits 1" hole. Each
1967 Cadillac Eldorado Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-AFirewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L. Replaces OEM#'s (GM) 7642589 and (AMC) 4001934. Black. Each.
1967 Cadillac Eldorado Trunk Seal. 18 feet long. Each-TK 46-18Trunk Seal. 18 feet long. Each
1967 Cadillac Eldorado Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D-UM 1600-100Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D. Each
1967 Cadillac Eldorado Rear Side Roll-Up Window Seal, for Hardtops and Convertibles-VS 3Rear Side Roll-Up Window Seal, for Hardtops and Convertibles. Two 20" sections slide into metal track. No steel insert. Pair
1967 Cadillac Eldorado Rear Roll-Up Vertical Window Seals, for 2-Door Hardtops-VS 3-IRear Roll-Up Vertical Window Seals, for 2-Door Hardtops. Made with steel core. 15-7/8" long. Pair
1967 Cadillac Eldorado Vent window and rear division channel seals-WR 2002-EVent window and rear division channel seals. Fits '65-'68 GM B-body and C-body 2-door and 4-door hardtops and convertibles. Top quality EPDM dense rubber. 4-piece set. R&L.Why Choose Metro?
For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.
- Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
- Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
- SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
- Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
- Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.
Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.