×
close
1967 Chevrolet Caprice Catalog and Classic Car Guide, Ratings and Features

Image of 1967 Chevrolet Caprice, sourced from www.classicautomall.com , Image Link.

Performance Metrics

Performance: +65
Handling: +50
Ride Comfort: +70

Fundamental Metrics

Safety: +30
Maintenance and Upkeep: +75
Restoration Difficulty: +80

Emotional Appeal

Looks: +70
Collectability: +60
Historical Significance: +50

MMP Rating

6.5 /10
Engine Specifications
Engine: 250 I6, 283 V8, 327 V8, 396 V8, 427 V8
Displacement: 250-427 cu in
Horsepower: 155-385 hp
Torque: 235-460 lb-ft
Compression Ratio: 8.25:1 - 11.0:1
Ignition System: Conventional breaker-point ignition system
Cooling System: Liquid-cooled
Performance Specifications
0-60 Time: 8-10 seconds
1/4 Mile Time: 15-17 seconds
Top Speed: 120-130 mph
Transmission and Drive
Drive Type: Rear-wheel drive
Transmission Type: 3-speed manual, 4-speed manual, 2-speed Powerglide automatic, 3-speed Turbo-Hydramatic automatic
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: 10-15 mpg
Dimensions and Brakes
Brakes: Front disc brakes, rear drum brakes
Wheelbase: 119 inches
Weight: 3,500-4,000 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

1967 Chevrolet Caprice: A Blend of Luxury and Muscle

The 1967 Chevrolet Caprice stands as a testament to American automotive excellence, a fusion of luxury and performance that captured the hearts of car enthusiasts. Born from the stables of General Motors, the Caprice was Chevrolet's top-of-the-line offering, designed to compete with other full-size luxury sedans of its era. Its introduction into the market marked a new chapter for Chevrolet, showcasing their ability to craft a vehicle that could deliver both comfort and power. A unique fact that entices many is that the '67 Caprice featured a new grille design and front bumper, setting it apart from its predecessors and making it an instant classic.

Design and Innovation

The exterior of the 1967 Caprice was a sight to behold, with its long, clean lines and subtle curves exuding an air of sophistication. The car's broad stance and squared-off contours hinted at its underlying strength. Inside, passengers were greeted with plush seating and an array of high-quality materials ranging from soft vinyl to rich wood accents. Technologically, the Caprice was ahead of its time, offering features such as an AM/FM stereo radio and air conditioning—luxuries that were not yet standard in all vehicles. Color options varied widely, with shades like Nantucket Blue and Granada Gold being popular picks among buyers. The most iconic body style was arguably the two-door hardtop coupe, which featured a sleek roofline without B-pillars for an almost convertible feel.

Historical Significance

The 1967 Caprice didn't just turn heads—it influenced the direction of automotive design with its blend of muscle car ethos and executive class luxury. It set itself apart by offering an upscale experience without sacrificing the raw power that drivers craved. This model year also saw the introduction of new safety features such as energy-absorbing steering columns and shoulder belts for closed models, reflecting a growing industry-wide emphasis on passenger protection.

Performance and Handling

Under the hood, the 1967 Caprice boasted a range of potent engines, with options including the formidable 427-cubic-inch (7.0-liter) Turbo-Jet V8 engine. This powerhouse could propel the Caprice to impressive speeds for its size, achieving 0-60 mph in under 7 seconds—a remarkable feat for a full-size sedan at that time. On the road, drivers enjoyed a smooth ride thanks to the refined suspension system, while power steering made handling this large vehicle surprisingly manageable. The throaty rumble of the V8 engine provided an exhilarating soundtrack to every journey.

Ownership Experience

The Caprice served various roles from being a prestigious daily driver to gracing car shows with its timeless elegance. Its robust construction meant reliability was one of its strong suits; however, like any classic car, maintenance is key to preserving its condition. Parts availability is generally good due to shared components with other Chevrolet models from that era, making repairs manageable for those with mechanical know-how.

Fun Facts

Intriguingly, some '67 Caprices found their way into celebrity garages—adding to their allure. While not known for breaking speed records, this model held its own in terms of sales success and customer satisfaction. Criticisms were few but did include remarks on fuel economy—a common trade-off for vehicles with larger engines during this period.

Collector's Information

Today, the value range for a well-maintained 1967 Chevrolet Caprice can vary greatly depending on condition, originality, and engine option—with pristine examples fetching higher prices in the collector's market. While production numbers were significant due to its popularity, finding one in excellent condition can be challenging. Price trends have shown appreciation over time for this classic American luxury sedan; estimates place values anywhere from $15,000 to upwards of $50,000 or more for exceptionally maintained or rare variants.

Conclusion

The 1967 Chevrolet Caprice remains an emblematic figure in automotive history—a harmonious blend of comfort and muscle that continues to captivate enthusiasts worldwide. Whether you're behind the wheel or admiring from afar, this classic Chevy is sure to leave a lasting impression with its distinguished design and robust performance.

1967 Chevrolet Caprice Catalog of Parts

1967 Chevrolet Caprice Upper door-lock pillar seal. 2-door hardtop and convertible-ALP 5053 1967 Chevrolet Caprice Upper door-lock pillar seal. 2-door hardtop and convertible-ALP 5053Upper door-lock pillar seal. 2-door hardtop and convertible. Does not fit Fastback models. Made with all details and galvanized steel cores. 2-3/16 in. W x 4-11/16 in. L. Pair. R&L.

1967 Chevrolet Caprice Shock Absorber Grommet.  1 bottom O.D., 3/4 high-BN 1 1967 Chevrolet Caprice Shock Absorber Grommet. 1" bottom O.D., 3/4" high-BN 1Shock Absorber Grommet. 1" bottom O.D., 3/4" high., with 7/16" I.D. Each

1967 Chevrolet Caprice Front coil-spring insulator-BN 110 1967 Chevrolet Caprice Front coil-spring insulator-BN 110Front coil-spring insulator. Fits '41-'60 Oldsmobile and '50-'83 GM passenger models. 5-3/8 in. OD x 3-3/4 in. ID x 3/4 in. high with 13/16 in. wide bottom flange 1/4" thick, 12 flutes. Each.

1967 Chevrolet Caprice Front Stabilizer End Repair Kit-BNK 22 1967 Chevrolet Caprice Front Stabilizer End Repair Kit-BNK 22Front Stabilizer End Repair Kit. 22-piece set for two stabilizer bars. Contains all rubber bushings, washers, bolts and nuts, enough for one front end. Set

1967 Chevrolet Caprice Butyl Glass Setting Tape-BT 1 1967 Chevrolet Caprice Butyl Glass Setting Tape-BT 1Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16" wide X 15' long. Each

1967 Chevrolet Caprice Brake Pedal Pad-CB 101-A 1967 Chevrolet Caprice Brake Pedal Pad-CB 101-ABrake Pedal Pad. For power brakes or automatic transmissions. 4-3/4" wide X 2-3/4' long. Each

1967 Chevrolet Caprice Power Brake Pedal Pad.  For cars with manual transmission-CB 101-C 1967 Chevrolet Caprice Power Brake Pedal Pad. For cars with manual transmission-CB 101-CPower Brake Pedal Pad. For cars with manual transmission. Nice reproduction. 3-5/8" wide X 2-5/8" long. Each





1967 Chevrolet Caprice Trip Meter Reset Knob.  Made of black rubber-KN 10 1967 Chevrolet Caprice Trip Meter Reset Knob. Made of black rubber-KN 10Trip Meter Reset Knob. Made of black rubber. Compare to measurements: 1/8" I.D., 7/16" O.D. X 1/2" tall. Each

1967 Chevrolet Caprice Molded Door Seals-LM 21-I 1967 Chevrolet Caprice Molded Door Seals-LM 21-IMolded Door Seals. For 2-Door Hardtop and Convertibles (does not fit Grand Prix hardtop or formal top cars). Pair R&L. Original part numbers #7648132 and 7648133.

1967 Chevrolet Caprice Front door seals-LM 21-J 1967 Chevrolet Caprice Front door seals-LM 21-JFront door seals. Fits '65-'66 GM B- and C-body 4-door hardtop (also called 'Sports Sedan') models. Replaces OEM#'s 4455994/5. Pair. R&L.

1967 Chevrolet Caprice Mirror pad. For mirrors with remote control. 1-1/4 in-MP 547-H 1967 Chevrolet Caprice Mirror pad. For mirrors with remote control. 1-1/4 in-MP 547-HMirror pad. For mirrors with remote control. 1-1/4 in. W x 5-1/2 in. L. Each.

1967 Chevrolet Caprice Mirror Pad for models without remote control-MP 547-N 1967 Chevrolet Caprice Mirror Pad for models without remote control-MP 547-NMirror Pad for models without remote control. 5-5/8" long, 15/16" wide. Each


1967 Chevrolet Caprice Basic Kit, for 2-Door Hardtop-RKB 2007-100 1967 Chevrolet Caprice Basic Kit, for 2-Door Hardtop-RKB 2007-100Basic Kit, for 2-Door Hardtop. Door (LM 21-I) Roof Rail (RR 5015) Trunk (TK 46-18), Seals. (Does not fit Fastback)

1967 Chevrolet Caprice Brake Master Cylinder Cover Seal.  Replaces OEM #5470861-RP 2-E 1967 Chevrolet Caprice Brake Master Cylinder Cover Seal. Replaces OEM #5470861-RP 2-EBrake Master Cylinder Cover Seal. Replaces OEM #5470861. 5" X 2-1/2". Each



1967 Chevrolet Caprice Clutch Arm Fork Boot.  Fits on bell housing to keep dirt out-RP 31-D 1967 Chevrolet Caprice Clutch Arm Fork Boot. Fits on bell housing to keep dirt out-RP 31-DClutch Arm Fork Boot. Fits on bell housing to keep dirt out. Each

1967 Chevrolet Caprice Positive Crankcase Ventilation Grommet-RP 9 1967 Chevrolet Caprice Positive Crankcase Ventilation Grommet-RP 9Positive Crankcase Ventilation Grommet. 11/16" wide X 1-5/8" long, with 15/16" I.D. (Fits some models) Each

1967 Chevrolet Caprice Molded roof-rail seals-RR 5015 1967 Chevrolet Caprice Molded roof-rail seals-RR 5015Molded roof-rail seals. For 2-door hardtops only (does not fit Fastback). 68 in. long. Please check your old seal to ensure proper ordering. Pair. R&L.

1967 Chevrolet Caprice Molded roof-rail seals-RR 5015-A 1967 Chevrolet Caprice Molded roof-rail seals-RR 5015-AMolded roof-rail seals. For 2-door Fastback models only (does not fit standard hardtop). 96 in. long. Please check your old seal to ensure proper ordering. Pair. R&L.


1967 Chevrolet Caprice Trunk Bumper.  Fits lower corner on decklid.  15/16 O.D-SB 34 1967 Chevrolet Caprice Trunk Bumper. Fits lower corner on decklid. 15/16" O.D-SB 34Trunk Bumper. Fits lower corner on decklid. 15/16" O.D., 11/16" high. Each

1967 Chevrolet Caprice Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35 1967 Chevrolet Caprice Door Bumper, 57-74 GM Cars, Made with Twin Retainers, Each-SB 35Door Bumper, 57-74 GM Cars, made with twin retainers, Each. Measure 1-1/16" high X 19/32" wide X 1-1/32" long.

1967 Chevrolet Caprice Seat Bumper.  Made with steel core like original-SB 62-A 1967 Chevrolet Caprice Seat Bumper. Made with steel core like original-SB 62-ASeat Bumper. Made with steel core like original. 1-1/2" long, 7/16" thick. Two used per car. Each

1967 Chevrolet Caprice Clutch Pedal Return Bumper-SB 64 1967 Chevrolet Caprice Clutch Pedal Return Bumper-SB 64Clutch Pedal Return Bumper. 1-13/16" long X 13/16" wide X 7/8" high (center). Each

1967 Chevrolet Caprice Bumper Brace to Filler Panel Spacer, 68-71 Chevy A Body, 67-71 GM B Body Exc Wgn-SB 68 1967 Chevrolet Caprice Bumper Brace to Filler Panel Spacer, 68-71 Chevy A Body, 67-71 GM B Body Exc Wgn-SB 68Bumper Brace to Filler Panel Spacer, 68-71 Chevy A Body Except Wagons, 67-71 GM B Body Except Wagons, Each. Replaces OEM # 3895100.





1967 Chevrolet Caprice Dash and Firewall Grommet.  Single-hole type is for one wire-SM 101 1967 Chevrolet Caprice Dash and Firewall Grommet. Single-hole type is for one wire-SM 101Dash and Firewall Grommet. Single-hole type is for one wire. Each


1967 Chevrolet Caprice Timing Hole Plug.  For 6-cylinder engines.  1-3/4 X 1-1/4-SM 59 1967 Chevrolet Caprice Timing Hole Plug. For 6-cylinder engines. 1-3/4" X 1-1/4"-SM 59Timing Hole Plug. For 6-cylinder engines. 1-3/4" X 1-1/4". Each


1967 Chevrolet Caprice Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-A 1967 Chevrolet Caprice Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-AFirewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L. Replaces OEM#'s (GM) 7642589 and (AMC) 4001934. Black. Each.


1967 Chevrolet Caprice Unbeaded Door and Trunk Lock Gasket.  1-3/16 O.D., 7/8 I.D-UM 1600-100 1967 Chevrolet Caprice Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D-UM 1600-100Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D. Each


1967 Chevrolet Caprice Rear Side Roll-Up Window Seal, for Hardtops and Convertibles-VS 3 1967 Chevrolet Caprice Rear Side Roll-Up Window Seal, for Hardtops and Convertibles-VS 3Rear Side Roll-Up Window Seal, for Hardtops and Convertibles. Two 20" sections slide into metal track. No steel insert. Pair

1967 Chevrolet Caprice Rear Roll-Up Quarter Window Seals-VS 3-R 1967 Chevrolet Caprice Rear Roll-Up Quarter Window Seals-VS 3-RRear Roll-Up Quarter Window Seals, for 2-Door Hardtops and Convertibles. Pair

1967 Chevrolet Caprice Window Sweeper Kit, 67 Chevrolet Caprice 4 Door Hardtop, 8 Piece Kit-WC 7200-60 1967 Chevrolet Caprice Window Sweeper Kit, 67 Chevrolet Caprice 4 Door Hardtop, 8 Piece Kit-WC 7200-60Window Sweeper Kit, 67 Chevrolet Caprice 4 Door Hardtop, 8 Piece Kit. Kit includes front window left and right inner and outer sweeps, rear window left and right inner and outer sweeps.

1967 Chevrolet Caprice Quarter Window Reveal Molding Clip.  Made of Steel-WF 205 1967 Chevrolet Caprice Quarter Window Reveal Molding Clip. Made of Steel-WF 205Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8" X 11/16". Each

1967 Chevrolet Caprice Rear Window Reveal Molding Clip.  For Station Wagons-WF 208 1967 Chevrolet Caprice Rear Window Reveal Molding Clip. For Station Wagons-WF 208Rear Window Reveal Molding Clip. For Station Wagons. Made of steel. 5/8" x 3/4". Each

1967 Chevrolet Caprice Vent window and rear division channel seals-WR 2002-E 1967 Chevrolet Caprice Vent window and rear division channel seals-WR 2002-EVent window and rear division channel seals. Fits '65-'68 GM B-body and C-body 2-door and 4-door hardtops and convertibles. Top quality EPDM dense rubber. 4-piece set. R&L.

1967 Chevrolet Caprice Front Suspension Bumper.  For steering knuckle support-XB 20 1967 Chevrolet Caprice Front Suspension Bumper. For steering knuckle support-XB 20Front Suspension Bumper. For steering knuckle support. 1-3/8" high. Each

Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help