×
close
1930 Sunbeam Three-Litre Catalog and Classic Car Guide, Ratings and Features

Image of 1930 Sunbeam Three-Litre, sourced from en.wikipedia.org , Image Link.

Performance Metrics

Performance: +30
Handling: +35
Ride Comfort: +40

Fundamental Metrics

Safety: +20
Maintenance and Upkeep: +25
Restoration Difficulty: +15

Emotional Appeal

Looks: +70
Collectability: +60
Historical Significance: +50

MMP Rating

4.9 /10
Engine Specifications
Engine Options: 6-cylinder in-line, side valves
Displacement Range: 3.0 Litres
Horsepower Range: Estimated 70-80 HP
Torque: Not available
Compression Ratio: Not available
Ignition System: Magneto
Cooling System: Water-cooled
Performance Specifications
0-60 Time: Not available
1/4 Mile Time: Not available
Top Speed: 75-85 mph
Transmission and Drive
Drive Type: Rear-wheel drive
Transmission Type: 4-speed manual
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: Not available
Dimensions and Brakes
Brakes: Drum brakes
Wheelbase: 130 inches
Weight: 3500 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

Unveiling the 1930 Sunbeam Three-Litre: A Pinnacle of Pre-War Elegance

The 1930 Sunbeam Three-Litre not only stands as a testament to the engineering prowess of its era but also encapsulates the spirit of pre-war luxury and innovation. Crafted by the esteemed Sunbeam Motor Car Company, this vehicle emerged from an age where automobiles began to transcend mere transportation, evolving into symbols of status and technological advancement. With a lineage rooted in the industrial revolution's heartland, the Three-Litre model was born into a world where motorcars were becoming an integral part of society's fabric.

Among its many accolades, the Sunbeam Three-Litre is particularly noted for its participation in prestigious events, including rallying and endurance competitions. This not only showcased its reliability and performance but also cemented its place in automotive history as a vehicle that could hold its own against the best of its time.

Design and Innovation: A Study in Automotive Artistry

The exterior of the 1930 Sunbeam Three-Litre exudes a charm that is both stately and sporty. Its long bonnet, sweeping fenders, and gleaming chrome accents paint a picture of elegance on wheels. The car's design reflects an era when each line and curve was meticulously thought out, resulting in a vehicle that was as much a work of art as it was an engineering marvel.

Inside, the Three-Litre's cabin was a realm of luxury. High-quality leather and polished wood greeted passengers, offering comfort and style that were unparalleled at the time. The attention to detail extended to even the smallest components, showcasing Sunbeam's commitment to excellence.

Technologically, the Sunbeam Three-Litre was ahead of its time with features such as four-wheel brakes—a rarity among cars from that period. It was available in various color options, with deep blues and rich greens being among the popular choices that complemented its dignified silhouette.

The most iconic body style for the Three-Litre was arguably the tourer version, which offered an open-air motoring experience that epitomized the freedom and adventure sought by drivers of that golden age.

Historical Significance: Setting Standards in Automotive Excellence

The 1930 Sunbeam Three-Litre didn't just turn heads; it set benchmarks. Its blend of performance, style, and luxury influenced subsequent automotive designs and helped establish standards for what a premium automobile should offer. In an era dominated by mass production, the Three-Litre managed to maintain a sense of individuality and craftsmanship that set it apart from its contemporaries.

Performance and Handling: A Symphony on Wheels

The performance credentials of the 1930 Sunbeam Three-Litre were impressive for its time. With a top speed that could reach up to 70 mph—a remarkable feat then—the car offered exhilarating acceleration that could leave many competitors trailing in its wake.

On winding roads or when navigating through rough terrain, drivers praised the Three-Litre for its composed handling. The experience behind the wheel was one of control and engagement; from the responsive steering to the melodious roar of its inline-six engine, every drive was an event to be savored.

Ownership Experience: Beyond Mere Transportation

The 1930 Sunbeam Three-Litre served various roles ranging from daily transport for the well-heeled to taking center stage at classic car shows. While maintenance required a level of care befitting such a distinguished machine, owners found it relatively straightforward thanks to Sunbeam's engineering logic.

Fun Facts: The Legacy Continues

This illustrious model has seen ownership by notable figures throughout history and has been featured in various media as an icon of its time. While it may have faced criticisms for being too opulent during economic hardships, such views have only added to its story rather than diminish its allure.

Collector's Information: A Treasure Worth Pursuing

In today's collector market, a 1930 Sunbeam Three-Litre can command significant interest. With production numbers not exceedingly high—estimated in the hundreds rather than thousands—finding one can be akin to uncovering hidden treasure. Values have generally appreciated over time due to their rarity and historical importance, with well-preserved examples fetching handsome sums well into six-figure territories.

Conclusion: Celebrating Automotive Heritage

The 1930 Sunbeam Three-Litre is more than just an old car; it is a piece of history that continues to captivate enthusiasts around the globe. Its combination of design elegance, innovative features, and spirited performance make it a cherished classic that stands as a tribute to an extraordinary epoch in automotive evolution.

1930 Sunbeam Three-Litre Catalog of Parts

1930 Sunbeam THREE-LITRE Spring Shackle Rubber Insulators-RP 125 1930 Sunbeam THREE-LITRE Spring Shackle Rubber Insulators-RP 125Spring Shackle Rubber Insulators. 1" wide X 6-3/4" long each. 12-Piece Set

Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help