-
PT 1
Pigtail Connector. Single small wire lead. 12" long-PT 1
$4.06Pigtail Connector. Single small wire lead. 12" long. EachFeaturesHighly conductive Thermal resistant
-
PL 11
Fuel Valve Tip. 7/8" O.D., 7/8" high. Each-PL 11
$7.02Fuel Valve Tip. 7/8" O.D., 7/8" high. EachFeaturesPerforms well in contact with oils and many chemicals Resists degradation from sun, ozone, and weather
-
PK 161
Universal Lens Gasket Material -PK 161
$53.60Universal Lens Gasket Material. Foam Sheets: 12" X 24" X 1/8" and 12" X 24" X 3/16". Cork Sheet: 12-1/2" X 18" X 1/8". 3-Piece setFeaturesDurable, long-lasting and strong Made from state of the art materials
-
MW01260
Tool Box Liner, 12" X 60". Each-MW01260
$8.04Tool Box Liner, 12" X 60". EachFeaturesMade from state-of-the-art rubber compounds with sunlight, ozone, and chemical resistant materials Maximum slip resistance
-
MW 10062
Bypass Cap Assortment-MW 10062
$24.90Bypass Cap Assortment. 2-1/8", 2-1/4", 2-3/8",2-1/2", 8-Piece SetFeaturesMade from state-of-the-art rubber compounds with sunlight, ozone, and chemical resistant materials Made in the USA
-
MW 10041
Front Coil Spring Boosters, 1 or 1-1/2" Heavy Duty-MW 10041
$27.40Front Coil Spring Boosters, 1 or 1-1/2" Heavy Duty. Set of 4FeaturesMade from state-of-the-art rubber compounds with sunlight, ozone, and chemical resistant materials Made in the USA
-
MW 10040
Rear Coil Spring Boosters, 2-1/2" Heavy Duty. Set of 2-MW 10040
$34.88Rear Coil Spring Boosters, 2-1/2" Heavy Duty. Set of 2FeaturesMade from state-of-the-art rubber compounds with sunlight, ozone, and chemical resistant materials Made in the USA
-
MW 10000
Gas Splash Shield. 9-5/16" long X 5-7/8" wide. Each-MW 10000
$31.14Gas Splash Shield. 9-5/16" long X 5-7/8" wide. EachFeaturesMade from state-of-the-art rubber compounds with sunlight, ozone, and chemical resistant materials Made in the USA
-
LP 401
Door Edge Guard -LP 401
$4.49Door Edge Guard. Gold vinyl trim snaps into place to protect paint and rough or unfinished edges. Available in continuous length up to 150 feet. Sold by the footFeaturesExcellent rebound memory High quality EPDM extrusion Will not break down with UV...
-
IS-MW 10053
Tie Rod Dust Boot (Imported). 1/2" I.D., 1-5/16" O.D-IS-MW 10053
$3.00Tie Rod Dust Boot (Imported). 1/2" I.D., 1-5/16" O.D. (bottom), 1" high. EachFeaturesHand selected high quality import you can trust Superior form and function
-
IS-MW 10052
Ball Joint Dust Boot (Imported). 11/16" O.D., 1-3/4" O.D-IS-MW 10052
$3.00Ball Joint Dust Boot (Imported). 11/16" O.D., 1-3/4" O.D., 1-3/4" high. EachFeaturesHand selected high quality import you can trust Superior form and function
-
BN 4
Shock Absorber Grommet. 1" bottom O.D., 9/16" high-BN 4
$9.96Shock Absorber Grommet. 1" bottom O.D., 9/16" high., with 7/16" I.D. EachFeaturesMade with high quality compounds to last for years Manufactured with durability in mind
-
BN 33-A
Leaf Spring Bushing. 1-1/2" bottom O.D-BN 33-A
$84.80Leaf Spring Bushing. 1-1/2" bottom O.D. X 1-1/4" high, with 5/8" I.D. EachFeaturesMade with high quality compounds to last for years Manufactured with durability in mind
-
BN 10-A
Shock Absorber Grommet. 13/16" bottom O.D., 7/16" high-BN 10-A
$9.96Shock Absorber Grommet. 13/16" bottom O.D., 7/16" high., with 3/8" I.D. EachFeaturesMade with high quality compounds to last for years Manufactured with durability in mind
-
BL 7-B
Accelerator Rod Grommet. Each-BL 7-B
$9.82Accelerator Rod Grommet. EachFeaturesImprovements made over OEM originals, increasing there tear resistance. Resists, scuffs, chemicals and water.
-
BL 3-A
Brake Cover. 2-1/2" high, 2-1/2" O.D., 2" I.D-BL 3-A
$18.80Brake Cover. 2-1/2" high, 2-1/2" O.D., 2" I.D., 3/8" top hole. EachFeaturesImprovements made over OEM originals, increasing there tear resistance. Resists, scuffs, chemicals and water.
-
BL 201
Horn Squeeze Bulb -BL 201
$73.34Horn Squeeze Bulb. This replacement has a brass ferrule on the end. Black and smooth. 5" high X 3" diameter with, 5/8" opening. EachFeaturesImprovements made over OEM originals, increasing there tear resistance. Resists, scuffs, chemicals and water.
-
BL 11
Park brake boot. For lever at floor. 3-1/4 in-BL 11
$35.91Park brake boot. For lever at floor. 3-1/4 in. long x 1-7/16 in. wide x 1 in. high with, 7/8 in. long inner slot. Each.FeaturesImprovements made over OEM originals, increasing there tear resistance. Resists, scuffs, chemicals and water.
Excellent Quality
Fit perfectly. Seals better than original door seals 25 years ago. Drove to the mountains and was astounded at the lack of wind noise coming into the cab of the old 86 Toyota. Clean up your door and cab contact points, install with care and you will be very pleased.