Metro Moulded Parts

Designed for the 1935 Ford Model 48 Car and 1936 Ford Model 68 Car, this horn vent pad measures 4-1/4" in outer diameter and is crafted to prevent rattling and squeaking of your hardware while...

For the 1935 Dodge SERIES DU and SERIES DV cars, this horn vent pad measures 4-1/4" wide by 10-1/2" long, making it a perfect fit for these classic models. Designed to prevent rattling and squeaking,...

For 1936 Dodge Series D-2, D-3, and D-4 cars, this horn vent pad measures 5-3/8" wide by 16-3/4" long, making it a perfect fit for your classic vehicle. Designed to prevent hardware from rattling and...

This Hydem Welt is designed for convertible tops and upholstery applications, making it a versatile choice for most convertible body styles. Crafted from durable exterior vinyl with a grained...

This Hydem Welt is designed for convertible tops and upholstery applications, making it a versatile choice for enhancing the look and durability of your vehicle's interior and exterior. Measuring to...

This Hydem Welt is designed for convertible tops and other upholstery applications, measuring 11/16" wide and crafted from durable exterior vinyl with a grained pattern. Its white finish adds a...

This set of Hydramatic Transmission Lip Seals is designed for classic cars, including 1946-1954 Cadillac, Pontiac, Oldsmobile, Hudson, Nash, Lincoln, and Kaiser models. These seals are crafted to...

This hydraulic brake pedal pad is designed for 1952-1955 Kaiser cars, including Deluxe, Manhattan, Virginian, Carolina, Darrin, and Special models. Measuring 2-5/8" wide by 4-3/4" long, it is crafted...

For classic cars like the 1946-1949 Buick Roadmaster Series 70, Cadillac Series 62, Chevrolet Fleetline, Oldsmobile Dynamic, Pontiac Streamliner, and more, this Hydro-Electric Power Unit Mounting...

This Hydro-Electric Power Unit Mounting Cushion is designed specifically for convertible cars, ensuring a secure and stable fit for your hydraulic power unit. Crafted with precision using over 50...

This ignition cable grommet is designed for classic cars, including 1937-1948 Buick and Oldsmobile models, such as the Buick Century Series 60, Buick Roadmaster Series 70, and Oldsmobile Custom...

For 1949-1950 Oldsmobile Series 76, 88, and 98 cars, this ignition wire grommet is designed with precision to ensure a snug fit and reliable performance. Measuring 1/4" I.D. and 5/8" O.D., it is...

This inlet box bellows is designed for 1960-1964 Ford cars and 1962-1964 Ford Club Wagon vans, measuring 7" wide by 9-1/4" long. It connects the fresh air duct to the heater, ensuring proper airflow...

Designed for 1941 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, this inner 4-door step plate pad set is crafted from high-quality rubber and measures 3/32" thick. These pads are...

For 1939 Chevrolet Master 85, Oldsmobile Series 60, and Pontiac Quality Six cars, these inner and outer center division bar seals are precision-crafted to fit perfectly. Each seal measures 12-7/8" in...

For 1939 Buick Century Series 60, Buick Special 40, Cadillac Series 60 Special, Cadillac Series 61, Oldsmobile Series 70, Oldsmobile Series 80, Pontiac Deluxe Eight, and Pontiac Deluxe Six cars,...

Designed for 1935-1936 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, these Inner and Outer Center Division Bar Seals measure 14-1/4" long each and are crafted to ensure a precise fit for...

For the 1992-1996 Honda Prelude, this inner door seal is designed to fit perfectly, ensuring a snug and secure installation on both the driver and passenger sides. This pair of seals (R&L) is crafted...

For the 1957 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series cars, this pair of inner fender fillers is crafted to keep your engine compartment clean by acting as a dust and mud shield. Made...

For 1933-1935 Chevrolet Eagle, Mercury, Master, and Standard cars, these inner headlight pads measure 1-5/8" O.D. and are designed to keep your vehicle looking and performing its best. Crafted to...

Designed for 2-door hardtop A-body models, this pair of inner rear vertical quarter window seals fits 1970-1972 Buick Skylark and Chevrolet Chevelle cars. These seals are crafted with...

Designed for 1951 Lincoln Cosmopolitan, Lincoln, Mercury, and Mercury Monterey cars, these inner splash flaps measure 17-9/16" in length and are crafted to fit perfectly as inner fender rubber filler...

For the 1967-1968 Chevrolet Camaro, this inner splash flap set of 5 is crafted from stiff rubber, identical to the original in composition, texture, and color. These flaps are designed to act as a...

For the 1969 Chevrolet Camaro, this inner splash flap set includes five pieces made from stiff rubber, perfectly matching the original in composition, texture, and color. Designed to act as a dust...

For the 1967 Chevrolet Chevelle, these inner splash flaps are essential for keeping your engine compartment clean and protected. Made from stiff rubber that matches the original in composition,...

For the 1960 Chevrolet Bel Air, Biscayne, and Impala cars, these inner splash flaps are essential for keeping your engine compartment clean and protected. Made from stiff rubber that matches the...

Designed for 1961 Chevrolet Bel Air, Biscayne, and Impala cars, these inner splash flaps are crafted to keep your engine compartment clean by acting as a reliable dust and mud shield. Made from stiff...

Designed for 1965 Chevrolet Bel Air, Biscayne, and Impala cars, these inner splash flaps are crafted from stiff rubber that matches the original in composition, texture, and color. Perfectly sized to...

Designed for 1966 Chevrolet Bel Air, Biscayne, Caprice, and Impala cars, these inner splash flaps are crafted to keep your engine compartment clean by acting as a reliable dust and mud shield. Made...

For 1968-1969 Chevrolet Bel Air, Biscayne, Caprice, and Impala cars, these inner splash flaps are essential for keeping your engine compartment clean and protected. Made from stiff rubber that...