Metro Moulded Parts

For 1949-1950 Oldsmobile Series 76, 88, and 98 cars, this ignition wire grommet is designed with precision to ensure a snug fit and reliable performance. Measuring 1/4" I.D. and 5/8" O.D., it is...

This inlet box bellows is designed for 1960-1964 Ford cars and 1962-1964 Ford Club Wagon vans, measuring 7" wide by 9-1/4" long. It connects the fresh air duct to the heater, ensuring proper airflow...

Designed for 1941 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, this inner 4-door step plate pad set is crafted from high-quality rubber and measures 3/32" thick. These pads are...

For 1939 Chevrolet Master 85, Oldsmobile Series 60, and Pontiac Quality Six cars, these inner and outer center division bar seals are precision-crafted to fit perfectly. Each seal measures 12-7/8" in...

For 1939 Buick Century Series 60, Buick Special 40, Cadillac Series 60 Special, Cadillac Series 61, Oldsmobile Series 70, Oldsmobile Series 80, Pontiac Deluxe Eight, and Pontiac Deluxe Six cars,...

Designed for 1935-1936 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, these Inner and Outer Center Division Bar Seals measure 14-1/4" long each and are crafted to ensure a precise fit for...

For the 1992-1996 Honda Prelude, this inner door seal is designed to fit perfectly, ensuring a snug and secure installation on both the driver and passenger sides. This pair of seals (R&L) is crafted...

For the 1957 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series cars, this pair of inner fender fillers is crafted to keep your engine compartment clean by acting as a dust and mud shield. Made...

For 1933-1935 Chevrolet Eagle, Mercury, Master, and Standard cars, these inner headlight pads measure 1-5/8" O.D. and are designed to keep your vehicle looking and performing its best. Crafted to...

Designed for 2-door hardtop A-body models, this pair of inner rear vertical quarter window seals fits 1970-1972 Buick Skylark and Chevrolet Chevelle cars. These seals are crafted with...

Designed for 1951 Lincoln Cosmopolitan, Lincoln, Mercury, and Mercury Monterey cars, these inner splash flaps measure 17-9/16" in length and are crafted to fit perfectly as inner fender rubber filler...

For the 1967-1968 Chevrolet Camaro, this inner splash flap set of 5 is crafted from stiff rubber, identical to the original in composition, texture, and color. These flaps are designed to act as a...

For the 1969 Chevrolet Camaro, this inner splash flap set includes five pieces made from stiff rubber, perfectly matching the original in composition, texture, and color. Designed to act as a dust...

For the 1967 Chevrolet Chevelle, these inner splash flaps are essential for keeping your engine compartment clean and protected. Made from stiff rubber that matches the original in composition,...

For the 1960 Chevrolet Bel Air, Biscayne, and Impala cars, these inner splash flaps are essential for keeping your engine compartment clean and protected. Made from stiff rubber that matches the...

Designed for 1961 Chevrolet Bel Air, Biscayne, and Impala cars, these inner splash flaps are crafted to keep your engine compartment clean by acting as a reliable dust and mud shield. Made from stiff...

Designed for 1965 Chevrolet Bel Air, Biscayne, and Impala cars, these inner splash flaps are crafted from stiff rubber that matches the original in composition, texture, and color. Perfectly sized to...

Designed for 1966 Chevrolet Bel Air, Biscayne, Caprice, and Impala cars, these inner splash flaps are crafted to keep your engine compartment clean by acting as a reliable dust and mud shield. Made...

For 1968-1969 Chevrolet Bel Air, Biscayne, Caprice, and Impala cars, these inner splash flaps are essential for keeping your engine compartment clean and protected. Made from stiff rubber that...

For 1969-1972 Chevrolet Chevelle cars, these inner splash flaps are designed to fit models with plastic fenders, providing essential protection for your engine compartment. Made from stiff rubber...

For 1968-1972 Chevrolet Chevelle cars, these inner splash flaps are designed specifically for models with steel fenders, providing a reliable dust and mud shield to keep your engine compartment clean...

For the 1956 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series cars, these inner splash flaps are designed to keep your engine compartment clean and protected. Made from stiff rubber with a...

Designed for the 1964-1966 Pontiac GTO car, these inner splash flaps are crafted to keep your engine compartment clean and protected. Made from stiff rubber with a cloth backing, they replicate the...

Designed for the Pontiac GTO car from 1967 to 1971, these inner splash flaps measure 12" x 4" and are crafted from stiff rubber with a cloth backing, perfectly replicating the original in texture,...

For the 1968 Pontiac GTO, LeMans, and Tempest cars, these inner tail-light lens gaskets measure 4 inches wide by 13 inches long and are crafted from durable gray sponge material with an adhesive...

Designed for the 1973-1977 Chevrolet El Camino Truck, these chrome beltline moldings are crafted to fit perfectly on the top of the inner doors, measuring to match the original specifications. Made...

Inner window sweepers. With mitered corners, bends and installed clips. Pair. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs.FeaturesAccurate...

Inner window sweepers. With mitered corners, bends and installed clips. Pair. NOTE: $20 special shipping charge applies for domestic orders. Call or email for overseas shipping costs.FeaturesAccurate...

This inside door handle retaining clip is designed for a secure fit and reliable performance, ensuring your vehicle's door handle stays firmly in place. Crafted with high-strength materials, this...

This inside handle escutcheon shield is designed for 1962-1964 Dodge Dart cars and 1962-1964 Plymouth Belvedere, Fury, and Savoy cars. Measuring 1-5/8" in outer diameter and 3/4" in inner diameter,...