This hood cable grommet is designed for 1940-1941 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, fitting a 7/16" to 1/2" hole with a 3/16" center hole. Crafted from state-of-the-art rubber compounds, it resists chemicals, sunlight, and ozone,...

Designed for the 1966-1967 Dodge Coronet and Plymouth Belvedere cars, this gas filler neck to tank grommet is a critical component for ensuring a secure and leak-free connection between the fuel filler neck and the tank. Made with state-of-the-art rubber...

Designed for 1940-1948 Chevrolet cars, including Master 85, Special Deluxe, Fleetmaster, Fleetline, and Stylemaster models, this firewall grommet measures 1-5/8" in outer diameter and is specifically crafted for the temperature gauge. Made by Metro...

Designed for classic cars, this windshield wiper pivot grommet is a perfect fit for 1946-1952 Cadillac and Chevrolet models, including the Cadillac Series 6, Series 60 Special Fleetwood, Series 62, Series 75 Fleetwood, and Chevrolet Fleetline,...

For the 1954-1962 Metropolitan Series A, B, and 560 III/IV cars, this door end plug is a must-have for maintaining your classic vehicle's integrity. Designed to fit snugly into the door ends, this plug is crafted from state-of-the-art rubber compounds,...

This timing hole plug is designed for 6-cylinder engines and measures 1-3/4" x 1-1/4", making it a perfect fit for your classic Chevrolet. Crafted by Metro Moulded Parts, it is built with state-of-the-art rubber compounds that resist chemicals, sunlight,...

For classic car enthusiasts, this trunk wire harness grommet is designed for 1953-1955 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, fitting a 7/8" hole with a flexible 3/16" center hole. Crafted from state-of-the-art rubber compounds, it...

This headlight wire grommet is designed for classic car models, including the 1952-1957 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars. It fits a 7/8" hole with a 7/16" center hole, ensuring a snug and secure fit for your wiring needs. Made...

Designed for classic car enthusiasts, this manual wiper pump firewall grommet is a perfect fit for 1967-1974 Dodge Dart, Plymouth Barracuda, Valiant, Cuda, and Duster models. Measuring 1-3/4" in outer diameter and fitting a 1-1/2" hole, this grommet...

This windshield wiper grommet, designed for classic cars with a 1" hole, is a perfect fit for 1940-1948 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models, as well as 1953-1955 Chevrolet Corvettes. Crafted from advanced rubber compounds, it...

This headliner bow grommet is designed for 1948-1954 Hudson cars, including the Commodore Series, Super 6, Super 8, Pacemaker, Hornet, Wasp, Jet, Jetliner, and Super Jet models. Crafted with state-of-the-art rubber compounds, it is resistant to...

For the 1968-1976 Chevrolet Corvette, this hood release cable grommet is designed to fit a 1-1/8" hole at the firewall, ensuring a snug and secure fit. Crafted by Metro Moulded Parts, it is made with advanced rubber compounds that resist chemicals,...

This firewall grommet is designed for 1953-1954 Chevrolet Bel Air, Corvette, One-Fifty Series, and Two-Ten Series cars, fitting a 7/8" hole with a 1-3/16" outer diameter and a 9/16" inner diameter. Crafted to secure headlight and park light harnesses, it...

This hole plug and cowl bumper is designed for classic cars, fitting a 1/2" hole, and is perfect for 1949-1958 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models, including iconic vehicles like the 1953 Cadillac Eldorado and 1957 Chevrolet Bel...

Designed for 1951-1956 Buick Roadmaster, Special, Super, Century, and Skylark cars, this firewall grommet for vacuum line hoses measures 2-11/16" long, 1-5/8" wide, and 1-3/16" thick. Crafted by Metro Moulded Parts, it is made with advanced rubber...

This heater control valve gasket is designed for classic cars, including the 1954-1957 Buick Century, Roadmaster, Special, and Super; Cadillac DeVille, Eldorado, Series 60 Fleetwood, Series 62, and Series 75 Fleetwood; Oldsmobile 88, 98, Starfire,...

Designed for the 1954-1962 Metropolitan Series A, B, and 560 III/IV cars, this pivot grommet measures 3/4" high with a 3/16" inner diameter, ensuring a precise fit for your classic vehicle. Crafted by Metro Moulded Parts, it is made from advanced rubber...

This floor panel wire grommet, designed for classic car models like the 1963-1974 Dodge and Plymouth cars, fits a 3/4" hole and is crafted to protect wiring as it passes through the floor panel. Made from state-of-the-art rubber compounds, it is...

This speedometer cable firewall grommet is designed for 1939-1948 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac cars, fitting a 1-7/8" long hole. It is not compatible with vehicles originally equipped with factory windshield washers. Crafted from...

Designed for Kaiser vehicles, this headlight wire grommet is crafted with precision to ensure a snug and secure fit. Made from advanced rubber compounds, it is resistant to chemicals, sunlight, and ozone, providing long-lasting durability and protection...

Designed for various body styles, these sheet metal grommets measure 13/16" I.D. and 1-5/8" O.D., fitting perfectly into a 1" hole. Crafted with state-of-the-art rubber compounds, they are built to resist chemicals, sunlight, and ozone, ensuring...

This firewall grommet, designed to fit holes ranging from 1" to 1-1/4" with a 3/4" center hole, is a must-have for maintaining a clean and secure firewall in your vehicle. Crafted from state-of-the-art rubber compounds, it offers exceptional resistance...

Designed for classic Chevrolet cars, this fender grommet fits a 5/8" hole and is specifically crafted for headlight wire protection. It is compatible with 1939 Chevrolet Master 85, 1940 Chevrolet Master 85 and Special Deluxe, 1941 Chevrolet Fleetmaster...

This accelerator rod grommet is designed for the 1969-1973 Opel Opel Car, with precise measurements of 5/16" I.D., 5/8" O.D., and 7/16" high. Crafted from advanced rubber compounds, it offers exceptional resistance to chemicals, sunlight, and ozone,...

This sheet metal grommet, designed with a 9/16" outer diameter, 5/16" inner diameter, and a groove width of 1/8", fits perfectly into a 1/2" hole, making it an essential component for a secure and snug fit in your vehicle. Crafted by Metro Moulded Parts,...

This accelerator rod grommet is designed for classic cars, including the 1935-1948 Chrysler, DeSoto, Dodge, and Plymouth models listed in the fitment details. It ensures a secure and snug fit for the accelerator rod through the floorboard, providing a...

Designed for 1933-1935 Chevrolet Eagle, Mercury, Master, and Standard cars, this floorboard grommet is a precision-engineered part for the accelerator rod through the toe board. With a steel sleeve and exact measurements of 1/2" I.D., 2" O.D., and 3/8"...

Designed for 1941-1949 INTERNATIONAL K-1, K-2, and K-3 cars, this headlight wire grommet measures 1-7/32" OD x 15/16" H, ensuring a precise fit for your vehicle's wiring needs. Crafted by Metro Moulded Parts, it is made from advanced rubber compounds...

This firewall grommet is designed for 1941-1949 INTERNATIONAL K-1, K-2, and K-3 cars, ensuring a precise fit for these classic vehicles. Crafted with state-of-the-art rubber compounds, it is resistant to chemicals, sunlight, and ozone, making it durable...

This firewall grommet, designed for classic cars like the 1939-1948 Buick and Cadillac models and 1950-1958 Oldsmobile models, fits a 1-inch hole and features an angled opening for the park brake cable. Crafted from advanced rubber compounds, it resists...